From fa1bb24f1f8aaf8e598a3bc53d90922e445fe59a Mon Sep 17 00:00:00 2001 From: iximeow Date: Thu, 14 Mar 2019 15:52:30 -0700 Subject: add qhy headers......... --- include/qhy/usb.h | 1083 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1083 insertions(+) create mode 100644 include/qhy/usb.h (limited to 'include/qhy/usb.h') diff --git a/include/qhy/usb.h b/include/qhy/usb.h new file mode 100644 index 0000000..ac5d23f --- /dev/null +++ b/include/qhy/usb.h @@ -0,0 +1,1083 @@ +/*++ + +Copyright (c) Microsoft Corporation. All rights reserved. + +Module Name: + + USB.H + +Abstract: + + structures and APIs for USB drivers. + +Environment: + + Kernel & user mode + +Revision History: + + 09-29-95 : created + 02-10-04 : Updated to include header versioning + +--*/ + +#ifndef __USB_H__ +#define __USB_H__ + + + +/* + This file is equivalent to USBDI.H with extensions supported by + usbport.sys for eUSB. + + This file replaces usbdi.h and is compatible with older versions + of the USB stack. +*/ + +#ifdef OSR21_COMPAT +#pragma message("WARNING: OSR21_COMPAT SWITCH NOT SUPPORTED") +#endif + +#ifndef _NTDDK_ +#ifndef _WDMDDK_ +typedef PVOID PIRP; +typedef PVOID PMDL; +#endif +#endif + +#define USBDI_VERSION 0x00000600 + +#include "usb200.h" +#ifdef _WDMDDK_ +#endif + +/* + Microsoft Extended Port Attribute Flags +*/ +#if _MSC_VER >= 1200 +#pragma warning(push) +#endif +#pragma warning(disable:4201) // named type definition in parentheses +#pragma warning(disable:4214) // named type definition in parentheses + +#define USB_PORTATTR_NO_CONNECTOR 0x00000001 +#define USB_PORTATTR_SHARED_USB2 0x00000002 +#define USB_PORTATTR_MINI_CONNECTOR 0x00000004 +#define USB_PORTATTR_OEM_CONNECTOR 0x00000008 + +/* dynamic attributes */ +#define USB_PORTATTR_OWNED_BY_CC 0x01000000 +#define USB_PORTATTR_NO_OVERCURRENT_UI 0x02000000 + + +/* define USB controller flavors: + These are all known HW implementations that require special + hacks. +*/ + +typedef enum _USB_CONTROLLER_FLAVOR { + + USB_HcGeneric = 0, + + OHCI_Generic = 100, + OHCI_Hydra, + OHCI_NEC, + + UHCI_Generic = 200, + UHCI_Piix4 = 201, + UHCI_Piix3 = 202, + UHCI_Ich2 = 203, + UHCI_Reserved204 = 204, // was ich2_2 + UHCI_Ich1 = 205, + UHCI_Ich3m = 206, + UHCI_Ich4 = 207, + UHCI_Ich5 = 208, + UHCI_Ich6 = 209, + + UHCI_Intel = 249, + + //these VIA revs require special handling in the uhci miniport + UHCI_VIA = 250, + UHCI_VIA_x01 = 251, + UHCI_VIA_x02 = 252, + UHCI_VIA_x03 = 253, + UHCI_VIA_x04 = 254, + + UHCI_VIA_x0E_FIFO = 264, + + EHCI_Generic = 1000, + EHCI_NEC = 2000, + EHCI_Lucent = 3000 + +} USB_CONTROLLER_FLAVOR; + + +// +// USB defined structures and constants +// (see chapter 9 of USB specification) +// + +#define USB_DEFAULT_DEVICE_ADDRESS 0 +#define USB_DEFAULT_ENDPOINT_ADDRESS 0 + +// +// max packet size (bytes) for default endpoint +// until SET_ADDRESS command is received. +// + +#define USB_DEFAULT_MAX_PACKET 64 + +// +// USBD interface structures and constants +// + + +#define URB_FROM_IRP(Irp) ((IoGetCurrentIrpStackLocation(Irp))->Parameters.Others.Argument1) + +// +// URB request codes +// + +#define URB_FUNCTION_SELECT_CONFIGURATION 0x0000 +#define URB_FUNCTION_SELECT_INTERFACE 0x0001 +#define URB_FUNCTION_ABORT_PIPE 0x0002 +#define URB_FUNCTION_TAKE_FRAME_LENGTH_CONTROL 0x0003 +#define URB_FUNCTION_RELEASE_FRAME_LENGTH_CONTROL 0x0004 +#define URB_FUNCTION_GET_FRAME_LENGTH 0x0005 +#define URB_FUNCTION_SET_FRAME_LENGTH 0x0006 +#define URB_FUNCTION_GET_CURRENT_FRAME_NUMBER 0x0007 +#define URB_FUNCTION_CONTROL_TRANSFER 0x0008 +#define URB_FUNCTION_BULK_OR_INTERRUPT_TRANSFER 0x0009 +#define URB_FUNCTION_ISOCH_TRANSFER 0x000A +#define URB_FUNCTION_GET_DESCRIPTOR_FROM_DEVICE 0x000B +#define URB_FUNCTION_SET_DESCRIPTOR_TO_DEVICE 0x000C +#define URB_FUNCTION_SET_FEATURE_TO_DEVICE 0x000D +#define URB_FUNCTION_SET_FEATURE_TO_INTERFACE 0x000E +#define URB_FUNCTION_SET_FEATURE_TO_ENDPOINT 0x000F +#define URB_FUNCTION_CLEAR_FEATURE_TO_DEVICE 0x0010 +#define URB_FUNCTION_CLEAR_FEATURE_TO_INTERFACE 0x0011 +#define URB_FUNCTION_CLEAR_FEATURE_TO_ENDPOINT 0x0012 +#define URB_FUNCTION_GET_STATUS_FROM_DEVICE 0x0013 +#define URB_FUNCTION_GET_STATUS_FROM_INTERFACE 0x0014 +#define URB_FUNCTION_GET_STATUS_FROM_ENDPOINT 0x0015 +#define URB_FUNCTION_RESERVED_0X0016 0x0016 +#define URB_FUNCTION_VENDOR_DEVICE 0x0017 +#define URB_FUNCTION_VENDOR_INTERFACE 0x0018 +#define URB_FUNCTION_VENDOR_ENDPOINT 0x0019 +#define URB_FUNCTION_CLASS_DEVICE 0x001A +#define URB_FUNCTION_CLASS_INTERFACE 0x001B +#define URB_FUNCTION_CLASS_ENDPOINT 0x001C +#define URB_FUNCTION_RESERVE_0X001D 0x001D +// previously URB_FUNCTION_RESET_PIPE +#define URB_FUNCTION_SYNC_RESET_PIPE_AND_CLEAR_STALL 0x001E +#define URB_FUNCTION_CLASS_OTHER 0x001F +#define URB_FUNCTION_VENDOR_OTHER 0x0020 +#define URB_FUNCTION_GET_STATUS_FROM_OTHER 0x0021 +#define URB_FUNCTION_CLEAR_FEATURE_TO_OTHER 0x0022 +#define URB_FUNCTION_SET_FEATURE_TO_OTHER 0x0023 +#define URB_FUNCTION_GET_DESCRIPTOR_FROM_ENDPOINT 0x0024 +#define URB_FUNCTION_SET_DESCRIPTOR_TO_ENDPOINT 0x0025 +#define URB_FUNCTION_GET_CONFIGURATION 0x0026 +#define URB_FUNCTION_GET_INTERFACE 0x0027 +#define URB_FUNCTION_GET_DESCRIPTOR_FROM_INTERFACE 0x0028 +#define URB_FUNCTION_SET_DESCRIPTOR_TO_INTERFACE 0x0029 + +// USB 2.0 calls start at 0x0030 + +#if (_WIN32_WINNT >= 0x0501) + +#define URB_FUNCTION_GET_MS_FEATURE_DESCRIPTOR 0x002A +#define URB_FUNCTION_SYNC_RESET_PIPE 0x0030 +#define URB_FUNCTION_SYNC_CLEAR_STALL 0x0031 + +#endif + +#if (_WIN32_WINNT >= 0x0600) + +#define URB_FUNCTION_CONTROL_TRANSFER_EX 0x0032 +#define URB_FUNCTION_RESERVE_0X0033 0x0033 +#define URB_FUNCTION_RESERVE_0X0034 0x0034 + +#endif + +// Reserve 0x002B-0x002F +#define URB_FUNCTION_RESERVE_0X002B 0x002B +#define URB_FUNCTION_RESERVE_0X002C 0x002C +#define URB_FUNCTION_RESERVE_0X002D 0x002D +#define URB_FUNCTION_RESERVE_0X002E 0x002E +#define URB_FUNCTION_RESERVE_0X002F 0x002F + + +// for backward drivers +#define URB_FUNCTION_RESET_PIPE \ + URB_FUNCTION_SYNC_RESET_PIPE_AND_CLEAR_STALL + +/* Control Pipe Function Groupings + + These functions correspond to the standard commands + on the default pipe, direction is implied + + +URB_FUNCTION_GET_DESCRIPTOR_FROM_DEVICE +URB_FUNCTION_GET_DESCRIPTOR_FROM_ENDPOINT +URB_FUNCTION_GET_DESCRIPTOR_FROM_INTERFACE + +URB_FUNCTION_SET_DESCRIPTOR_TO_DEVICE +URB_FUNCTION_SET_DESCRIPTOR_TO_ENDPOINT +URB_FUNCTION_SET_DESCRIPTOR_TO_INTERFACE + +URB_FUNCTION_SET_FEATURE_TO_DEVICE +URB_FUNCTION_SET_FEATURE_TO_INTERFACE +URB_FUNCTION_SET_FEATURE_TO_ENDPOINT +URB_FUNCTION_SET_FEATURE_TO_OTHER + +URB_FUNCTION_CLEAR_FEATURE_TO_DEVICE +URB_FUNCTION_CLEAR_FEATURE_TO_INTERFACE +URB_FUNCTION_CLEAR_FEATURE_TO_ENDPOINT +URB_FUNCTION_CLEAR_FEATURE_TO_OTHER + +URB_FUNCTION_GET_STATUS_FROM_DEVICE +URB_FUNCTION_GET_STATUS_FROM_INTERFACE +URB_FUNCTION_GET_STATUS_FROM_ENDPOINT +URB_FUNCTION_GET_STATUS_FROM_OTHER + +URB_FUNCTION_VENDOR_DEVICE +URB_FUNCTION_VENDOR_INTERFACE +URB_FUNCTION_VENDOR_ENDPOINT +URB_FUNCTION_VENDOR_OTHER + +URB_FUNCTION_CLASS_DEVICE +URB_FUNCTION_CLASS_INTERFACE +URB_FUNCTION_CLASS_ENDPOINT +URB_FUNCTION_CLASS_OTHER + +*/ + +// +// Values for URB TransferFlags Field +// + +/* + Set if data moves device->host +*/ +#define USBD_TRANSFER_DIRECTION 0x00000001 +/* + This bit if not set indicates that a short packet, and hence, + a short transfer is an error condition +*/ +#define USBD_SHORT_TRANSFER_OK 0x00000002 +/* + Subit the iso transfer on the next frame +*/ +#define USBD_START_ISO_TRANSFER_ASAP 0x00000004 +#define USBD_DEFAULT_PIPE_TRANSFER 0x00000008 + + +#define USBD_TRANSFER_DIRECTION_FLAG(flags) ((flags) & USBD_TRANSFER_DIRECTION) + +#define USBD_TRANSFER_DIRECTION_OUT 0 +#define USBD_TRANSFER_DIRECTION_IN 1 + +#define VALID_TRANSFER_FLAGS_MASK (USBD_SHORT_TRANSFER_OK | \ + USBD_TRANSFER_DIRECTION | \ + USBD_START_ISO_TRANSFER_ASAP | \ + USBD_DEFAULT_PIPE_TRANSFER) + +#define USBD_ISO_START_FRAME_RANGE 1024 + +typedef LONG USBD_STATUS; + +// +// USBD status codes +// +// Status values are 32 bit values layed out as follows: +// +// 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +---+---------------------------+-------------------------------+ +// | S | Status Code | +// +---+---------------------------+-------------------------------+ +// +// where +// +// S - is the state code +// +// 00 - completed with success +// 01 - request is pending +// 11, 10 - completed with error +// +// +// Code - is the status code +// + +// +// Generic test for success on any status value (non-negative numbers +// indicate success). +// + +#define USBD_SUCCESS(Status) ((USBD_STATUS)(Status) >= 0) + +// +// Generic test for pending status value. +// + +#define USBD_PENDING(Status) ((ULONG)(Status) >> 30 == 1) + +// +// Generic test for error on any status value. +// + +#define USBD_ERROR(Status) ((USBD_STATUS)(Status) < 0) + +// +// Macro to check the status code only +// +// +//define USBD_STATUS(Status) ((ULONG)(Status) & 0x0FFFFFFFL) + +// the high order bits (0xC) will always be set on an error + +#define USBD_STATUS_SUCCESS ((USBD_STATUS)0x00000000L) +#define USBD_STATUS_PENDING ((USBD_STATUS)0x40000000L) +// +//#define USBD_STATUS_ERROR ((USBD_STATUS)0xC0000000L) + + +// The following are defined for backward compatibility with the usb 1.0 stack + + +// +// HC (Hardware) status codes range 0x00000001 - 0x000000FF +// + +#define USBD_STATUS_CRC ((USBD_STATUS)0xC0000001L) +#define USBD_STATUS_BTSTUFF ((USBD_STATUS)0xC0000002L) +#define USBD_STATUS_DATA_TOGGLE_MISMATCH ((USBD_STATUS)0xC0000003L) +#define USBD_STATUS_STALL_PID ((USBD_STATUS)0xC0000004L) +#define USBD_STATUS_DEV_NOT_RESPONDING ((USBD_STATUS)0xC0000005L) +#define USBD_STATUS_PID_CHECK_FAILURE ((USBD_STATUS)0xC0000006L) +#define USBD_STATUS_UNEXPECTED_PID ((USBD_STATUS)0xC0000007L) +#define USBD_STATUS_DATA_OVERRUN ((USBD_STATUS)0xC0000008L) +#define USBD_STATUS_DATA_UNDERRUN ((USBD_STATUS)0xC0000009L) +#define USBD_STATUS_RESERVED1 ((USBD_STATUS)0xC000000AL) +#define USBD_STATUS_RESERVED2 ((USBD_STATUS)0xC000000BL) +#define USBD_STATUS_BUFFER_OVERRUN ((USBD_STATUS)0xC000000CL) +#define USBD_STATUS_BUFFER_UNDERRUN ((USBD_STATUS)0xC000000DL) +#define USBD_STATUS_NOT_ACCESSED ((USBD_STATUS)0xC000000FL) +#define USBD_STATUS_FIFO ((USBD_STATUS)0xC0000010L) + +#define USBD_STATUS_XACT_ERROR ((USBD_STATUS)0xC0000011L) +#define USBD_STATUS_BABBLE_DETECTED ((USBD_STATUS)0xC0000012L) +#define USBD_STATUS_DATA_BUFFER_ERROR ((USBD_STATUS)0xC0000013L) + +// +// returned by HCD if a transfer is submitted to an endpoint that is +// stalled +// +#define USBD_STATUS_ENDPOINT_HALTED ((USBD_STATUS)0xC0000030L) + +// +// Software status codes +// +#define USBD_STATUS_INVALID_URB_FUNCTION ((USBD_STATUS)0x80000200L) +#define USBD_STATUS_INVALID_PARAMETER ((USBD_STATUS)0x80000300L) + +// +// returned if client driver attempts to close an endpoint/interface +// or configuration with outstanding transfers. +// +#define USBD_STATUS_ERROR_BUSY ((USBD_STATUS)0x80000400L) +// +// returned by USBD if it cannot complete a URB request, typically this +// will be returned in the URB status field when the Irp is completed +// with a more specific NT error code in the irp.status field. +// +//#define USBD_STATUS_REQUEST_FAILED ((USBD_STATUS)0x80000500L) + +#define USBD_STATUS_INVALID_PIPE_HANDLE ((USBD_STATUS)0x80000600L) + +// returned when there is not enough bandwidth avialable +// to open a requested endpoint +#define USBD_STATUS_NO_BANDWIDTH ((USBD_STATUS)0x80000700L) +// +// generic HC error +// +#define USBD_STATUS_INTERNAL_HC_ERROR ((USBD_STATUS)0x80000800L) +// +// returned when a short packet terminates the transfer +// ie USBD_SHORT_TRANSFER_OK bit not set +// +#define USBD_STATUS_ERROR_SHORT_TRANSFER ((USBD_STATUS)0x80000900L) +// +// returned if the requested start frame is not within +// USBD_ISO_START_FRAME_RANGE of the current USB frame, +// note that the stall bit is set +// +#define USBD_STATUS_BAD_START_FRAME ((USBD_STATUS)0xC0000A00L) +// +// returned by HCD if all packets in an iso transfer complete with an error +// +#define USBD_STATUS_ISOCH_REQUEST_FAILED ((USBD_STATUS)0xC0000B00L) +// +// returned by USBD if the frame length control for a given +// HC is already taken by anothe driver +// +#define USBD_STATUS_FRAME_CONTROL_OWNED ((USBD_STATUS)0xC0000C00L) +// +// returned by USBD if the caller does not own frame length control and +// attempts to release or modify the HC frame length +// +#define USBD_STATUS_FRAME_CONTROL_NOT_OWNED ((USBD_STATUS)0xC0000D00L) + +// +// additonal software error codes added for usb 2.0 +// + +// +// returned for APIS not supported/implemented +// +#define USBD_STATUS_NOT_SUPPORTED ((USBD_STATUS)0xC0000E00L) + +#define USBD_STATUS_INAVLID_CONFIGURATION_DESCRIPTOR \ + ((USBD_STATUS)0xC0000F00L) + +#define USBD_STATUS_INVALID_CONFIGURATION_DESCRIPTOR \ + ((USBD_STATUS)0xC0000F00L) + +#define USBD_STATUS_INSUFFICIENT_RESOURCES ((USBD_STATUS)0xC0001000L) + +#define USBD_STATUS_SET_CONFIG_FAILED ((USBD_STATUS)0xC0002000L) + +#define USBD_STATUS_BUFFER_TOO_SMALL ((USBD_STATUS)0xC0003000L) + +#define USBD_STATUS_INTERFACE_NOT_FOUND ((USBD_STATUS)0xC0004000L) + +#define USBD_STATUS_INAVLID_PIPE_FLAGS ((USBD_STATUS)0xC0005000L) + +#define USBD_STATUS_TIMEOUT ((USBD_STATUS)0xC0006000L) + +#define USBD_STATUS_DEVICE_GONE ((USBD_STATUS)0xC0007000L) + +#define USBD_STATUS_STATUS_NOT_MAPPED ((USBD_STATUS)0xC0008000L) + +// returned when urb is intercepted or handled by the hub driver +#define USBD_STATUS_HUB_INTERNAL_ERROR ((USBD_STATUS)0xC0009000L) + + +// +// set when a transfers is completed due to an AbortPipe request from +// the client driver +// +// +#define USBD_STATUS_CANCELED ((USBD_STATUS)0xC0010000L) + +// +// extended isochronous error codes, these errors appear in the +// packet status field of an isochronous transfer +// + + +// for some reason the controller did not access the TD asocated with this +// packet +#define USBD_STATUS_ISO_NOT_ACCESSED_BY_HW ((USBD_STATUS)0xC0020000L) +// controller reported an error in the TD +// since TD errors are controoler specific they are reorted +// generically with this error code +#define USBD_STATUS_ISO_TD_ERROR ((USBD_STATUS)0xC0030000L) +// the packet was submitted in time by the client but +// failed to reach the miniport in time +#define USBD_STATUS_ISO_NA_LATE_USBPORT ((USBD_STATUS)0xC0040000L) +// the packet was not sent because the client submitted it too late +// to transmit +#define USBD_STATUS_ISO_NOT_ACCESSED_LATE ((USBD_STATUS)0xC0050000L) + +// new parameter validation status codes +#define USBD_STATUS_BAD_DESCRIPTOR ((USBD_STATUS)0xC0100000L) +#define USBD_STATUS_BAD_DESCRIPTOR_BLEN ((USBD_STATUS)0xC0100001L) +#define USBD_STATUS_BAD_DESCRIPTOR_TYPE ((USBD_STATUS)0xC0100002L) +#define USBD_STATUS_BAD_INTERFACE_DESCRIPTOR ((USBD_STATUS)0xC0100003L) +#define USBD_STATUS_BAD_ENDPOINT_DESCRIPTOR ((USBD_STATUS)0xC0100004L) +#define USBD_STATUS_BAD_INTERFACE_ASSOC_DESCRIPTOR ((USBD_STATUS)0xC0100005L) +#define USBD_STATUS_BAD_CONFIG_DESC_LENGTH ((USBD_STATUS)0xC0100006L) +#define USBD_STATUS_BAD_NUMBER_OF_INTERFACES ((USBD_STATUS)0xC0100007L) +#define USBD_STATUS_BAD_NUMBER_OF_ENDPOINTS ((USBD_STATUS)0xC0100008L) +#define USBD_STATUS_BAD_ENDPOINT_ADDRESS ((USBD_STATUS)0xC0100009L) + + + +typedef PVOID USBD_PIPE_HANDLE; +typedef PVOID USBD_CONFIGURATION_HANDLE; +typedef PVOID USBD_INTERFACE_HANDLE; + +// +// Value used to indicate the default max transfer size +// + +/* + MAX TRANSFER SIZE + + Specified during select_configuration or + selec_interface. This is the largest + transfer a client driver will do to an + endpoint. + + This value may be from 0x00000001 to + 0xFFFFFFFF (1 to 4GB) + +*/ +// + +#if (_WIN32_WINNT >= 0x0501) + +// +// For windows XP and later +// + +#define USBD_DEFAULT_MAXIMUM_TRANSFER_SIZE 0xFFFFFFFF + +#else + +// +// For Windows 2000 +// + +#define USBD_DEFAULT_MAXIMUM_TRANSFER_SIZE PAGE_SIZE + +#endif + +// +// structure returned from USBD_GetVersion function +// + +typedef struct _USBD_VERSION_INFORMATION { + ULONG USBDI_Version; //BCD usb interface version number + ULONG Supported_USB_Version; //BCD USB spec version number +} USBD_VERSION_INFORMATION, *PUSBD_VERSION_INFORMATION; + +typedef enum _USBD_PIPE_TYPE { + UsbdPipeTypeControl, + UsbdPipeTypeIsochronous, + UsbdPipeTypeBulk, + UsbdPipeTypeInterrupt +} USBD_PIPE_TYPE; + +#define USBD_PIPE_DIRECTION_IN(pipeInformation) ((pipeInformation)->EndpointAddress & \ + USB_ENDPOINT_DIRECTION_MASK) + +typedef struct _USBD_DEVICE_INFORMATION { + ULONG OffsetNext; + PVOID UsbdDeviceHandle; + USB_DEVICE_DESCRIPTOR DeviceDescriptor; +} USBD_DEVICE_INFORMATION, *PUSBD_DEVICE_INFORMATION; + +// +// URB request structures +// + +// +// USBD pipe information structure, this structure +// is returned for each pipe opened thru an +// SELECT_CONFIGURATION or SELECT_INTERFACE request. +// + +typedef struct _USBD_PIPE_INFORMATION { + // + // OUTPUT + // These fields are filled in by USBD + // + USHORT MaximumPacketSize; // Maximum packet size for this pipe + UCHAR EndpointAddress; // 8 bit USB endpoint address (includes direction) + // taken from endpoint descriptor + UCHAR Interval; // Polling interval in ms if interrupt pipe + + USBD_PIPE_TYPE PipeType; // PipeType identifies type of transfer valid for this pipe + USBD_PIPE_HANDLE PipeHandle; + + // + // INPUT + // These fields are filled in by the client driver + // + ULONG MaximumTransferSize; // Maximum size for a single request + // in bytes. + ULONG PipeFlags; +} USBD_PIPE_INFORMATION, *PUSBD_PIPE_INFORMATION; + +// +// values for PipeFlags field in USBD_PIPE_INFORMATION field +// + +// override the enpoint max_packet size +// with the value in pipe_information +// field +#define USBD_PF_CHANGE_MAX_PACKET 0x00000001 +// optimize for short packets +// 'bulk optimization #1' +#define USBD_PF_SHORT_PACKET_OPT 0x00000002 +// optimize transfers for use +// with 'real time threads +#define USBD_PF_ENABLE_RT_THREAD_ACCESS 0x00000004 +// causes the driver to allocate map +// map more transfers in the queue. +#define USBD_PF_MAP_ADD_TRANSFERS 0x00000008 + +#define USBD_PF_VALID_MASK (USBD_PF_CHANGE_MAX_PACKET | \ + USBD_PF_SHORT_PACKET_OPT | \ + USBD_PF_ENABLE_RT_THREAD_ACCESS | \ + USBD_PF_MAP_ADD_TRANSFERS) + + +// +// USBD interface information structure, this structure +// is returned for each interface opened thru an +// SELECT_CONFIGURATION or SELECT_INTERFACE request. +// + +typedef struct _USBD_INTERFACE_INFORMATION { + USHORT Length; // Length of this structure, including + // all pipe information structures that + // follow. + // + // INPUT + // + // Interface number and Alternate setting this + // structure is associated with + // + UCHAR InterfaceNumber; + UCHAR AlternateSetting; + + // + // OUTPUT + // These fields are filled in by USBD + // + UCHAR Class; + UCHAR SubClass; + UCHAR Protocol; + UCHAR Reserved; + + USBD_INTERFACE_HANDLE InterfaceHandle; + ULONG NumberOfPipes; + + // + // INPUT/OUPUT + // see PIPE_INFORMATION + + USBD_PIPE_INFORMATION Pipes[1]; +} USBD_INTERFACE_INFORMATION, *PUSBD_INTERFACE_INFORMATION; + +// +// work space provided for HCDs +// + +struct _URB_HCD_AREA { + PVOID Reserved8[8]; +}; + +struct _URB_HEADER { + // + // Fields filled in by client driver + // + USHORT Length; + USHORT Function; + USBD_STATUS Status; + // + // Fields used only by USBD + // + PVOID UsbdDeviceHandle; // device handle assigned to this device + // by USBD + ULONG UsbdFlags; // flags field reserved for USBD use. +}; + +struct _URB_SELECT_INTERFACE { + struct _URB_HEADER Hdr; // function code indicates get or set. + USBD_CONFIGURATION_HANDLE ConfigurationHandle; + + // client must input AlternateSetting & Interface Number + // class driver returns interface and handle + // for new alternate setting + USBD_INTERFACE_INFORMATION Interface; +}; + +struct _URB_SELECT_CONFIGURATION { + struct _URB_HEADER Hdr; // function code indicates get or set. + // NULL indicates to set the device + // to the 'unconfigured' state + // ie set to configuration 0 + PUSB_CONFIGURATION_DESCRIPTOR ConfigurationDescriptor; + USBD_CONFIGURATION_HANDLE ConfigurationHandle; + USBD_INTERFACE_INFORMATION Interface; +}; + +// +// This structure used for ABORT_PIPE & RESET_PIPE +// + +struct _URB_PIPE_REQUEST { + struct _URB_HEADER Hdr; // function code indicates get or set. + USBD_PIPE_HANDLE PipeHandle; + ULONG Reserved; +}; + +// +// This structure used for +// TAKE_FRAME_LENGTH_CONTROL & +// RELEASE_FRAME_LENGTH_CONTROL +// + +struct _URB_FRAME_LENGTH_CONTROL { + struct _URB_HEADER Hdr; // function code indicates get or set. +}; + +struct _URB_GET_FRAME_LENGTH { + struct _URB_HEADER Hdr; // function code indicates get or set. + ULONG FrameLength; + ULONG FrameNumber; +}; + +struct _URB_SET_FRAME_LENGTH { + struct _URB_HEADER Hdr; // function code indicates get or set. + LONG FrameLengthDelta; +}; + +struct _URB_GET_CURRENT_FRAME_NUMBER { + struct _URB_HEADER Hdr; // function code indicates get or set. + ULONG FrameNumber; +}; + +// +// Structures for specific control transfers +// on the default pipe. +// + +// GET_DESCRIPTOR +// SET_DESCRIPTOR + +struct _URB_CONTROL_DESCRIPTOR_REQUEST { + struct _URB_HEADER Hdr; // function code indicates get or set. + PVOID Reserved; + ULONG Reserved0; + ULONG TransferBufferLength; + PVOID TransferBuffer; + PMDL TransferBufferMDL; // *optional* + struct _URB *UrbLink; // *reserved MBZ* + struct _URB_HCD_AREA hca; // fields for HCD use + USHORT Reserved1; + UCHAR Index; + UCHAR DescriptorType; + USHORT LanguageId; + USHORT Reserved2; +}; + +// GET_STATUS + +struct _URB_CONTROL_GET_STATUS_REQUEST { + struct _URB_HEADER Hdr; // function code indicates get or set. + PVOID Reserved; + ULONG Reserved0; + ULONG TransferBufferLength; + PVOID TransferBuffer; + PMDL TransferBufferMDL; // *optional* + struct _URB *UrbLink; // *reserved MBZ* + struct _URB_HCD_AREA hca; // fields for HCD use + UCHAR Reserved1[4]; + USHORT Index; // zero, interface or endpoint + USHORT Reserved2; +}; + +// SET_FEATURE +// CLEAR_FEATURE + +struct _URB_CONTROL_FEATURE_REQUEST { + struct _URB_HEADER Hdr; // function code indicates get or set. + PVOID Reserved; + ULONG Reserved2; + ULONG Reserved3; + PVOID Reserved4; + PMDL Reserved5; + struct _URB *UrbLink; // *reserved MBZ* + struct _URB_HCD_AREA hca; // fields for HCD use + USHORT Reserved0; + USHORT FeatureSelector; + USHORT Index; // zero, interface or endpoint + USHORT Reserved1; +}; + +// VENDOR & CLASS + +struct _URB_CONTROL_VENDOR_OR_CLASS_REQUEST { + struct _URB_HEADER Hdr; // function code indicates get or set. + PVOID Reserved; + ULONG TransferFlags; + ULONG TransferBufferLength; + PVOID TransferBuffer; + PMDL TransferBufferMDL; // *optional* + struct _URB *UrbLink; // *reserved MBZ* + struct _URB_HCD_AREA hca; // fields for HCD use + UCHAR RequestTypeReservedBits; + UCHAR Request; + USHORT Value; + USHORT Index; + USHORT Reserved1; +}; + + +struct _URB_CONTROL_GET_INTERFACE_REQUEST { + struct _URB_HEADER Hdr; // function code indicates get or set. + PVOID Reserved; + ULONG Reserved0; + ULONG TransferBufferLength; + PVOID TransferBuffer; + PMDL TransferBufferMDL; // *optional* + struct _URB *UrbLink; // *reserved MBZ* + struct _URB_HCD_AREA hca; // fields for HCD use + UCHAR Reserved1[4]; + USHORT Interface; + USHORT Reserved2; +}; + + +struct _URB_CONTROL_GET_CONFIGURATION_REQUEST { + struct _URB_HEADER Hdr; // function code indicates get or set. + PVOID Reserved; + ULONG Reserved0; + ULONG TransferBufferLength; + PVOID TransferBuffer; + PMDL TransferBufferMDL; // *optional* + struct _URB *UrbLink; // *resrved MBZ* + struct _URB_HCD_AREA hca; // fields for HCD use + UCHAR Reserved1[8]; +}; + +#if (_WIN32_WINNT >= 0x0501) + +// Microsoft OS Descriptor APIs +// supported in windows XP and later + +#define OS_STRING_DESCRIPTOR_INDEX 0xEE + +#define MS_GENRE_DESCRIPTOR_INDEX 0x0001 +#define MS_POWER_DESCRIPTOR_INDEX 0x0002 + +#define MS_OS_STRING_SIGNATURE L"MSFT100" + +#define MS_OS_FLAGS_CONTAINERID 0x02 + +typedef struct _OS_STRING { + UCHAR bLength; + UCHAR bDescriptorType; + WCHAR MicrosoftString[7]; + UCHAR bVendorCode; + union { + UCHAR bPad; + UCHAR bFlags; + }; +} OS_STRING, *POS_STRING; + +struct _URB_OS_FEATURE_DESCRIPTOR_REQUEST { + struct _URB_HEADER Hdr; // function code indicates get or set. + PVOID Reserved; + ULONG Reserved0; + ULONG TransferBufferLength; + PVOID TransferBuffer; + PMDL TransferBufferMDL; // *optional* + struct _URB *UrbLink; // *optional* link to next urb request + // if this is a chain of commands + struct _URB_HCD_AREA hca; // fields for HCD use + UCHAR Recipient:5; // Recipient {Device,Interface,Endpoint} + UCHAR Reserved1:3; + UCHAR Reserved2; + UCHAR InterfaceNumber; // wValue - high byte + UCHAR MS_PageIndex; // wValue - low byte + USHORT MS_FeatureDescriptorIndex; // wIndex field + USHORT Reserved3; +}; + +#endif + +// +// request format for a control transfer on +// the non-default pipe. +// + +struct _URB_CONTROL_TRANSFER { + struct _URB_HEADER Hdr; // function code indicates get or set. + USBD_PIPE_HANDLE PipeHandle; + ULONG TransferFlags; + ULONG TransferBufferLength; + PVOID TransferBuffer; + PMDL TransferBufferMDL; // *optional* + struct _URB *UrbLink; // *reserved MBZ* + struct _URB_HCD_AREA hca; // fields for HCD use + UCHAR SetupPacket[8]; +}; + +#if (_WIN32_WINNT >= 0x0600) + +// +// Suported for Windows Longhorn and later +// + +struct _URB_CONTROL_TRANSFER_EX { + struct _URB_HEADER Hdr; + USBD_PIPE_HANDLE PipeHandle; + ULONG TransferFlags; + ULONG TransferBufferLength; + PVOID TransferBuffer; + PMDL TransferBufferMDL; // *optional* + ULONG Timeout; // *optional* timeout in milliseconds + // for this request, 0 = no timeout +#ifdef WIN64 + ULONG Pad; +#endif + struct _URB_HCD_AREA hca; // fields for HCD use + UCHAR SetupPacket[8]; +}; + +#endif + +struct _URB_BULK_OR_INTERRUPT_TRANSFER { + struct _URB_HEADER Hdr; // function code indicates get or set. + USBD_PIPE_HANDLE PipeHandle; + ULONG TransferFlags; // note: the direction bit will be set by USBD + ULONG TransferBufferLength; + PVOID TransferBuffer; + PMDL TransferBufferMDL; // *optional* + struct _URB *UrbLink; // *optional* link to next urb request + // if this is a chain of commands + struct _URB_HCD_AREA hca; // fields for HCD use +}; + + +// +// ISO Transfer request +// +// TransferBufferMDL must point to a single virtually +// contiguous buffer. +// +// StartFrame - the frame to send/receive the first packet of +// the request. +// +// NumberOfPackets - number of packets to send in this request +// +// +// IsoPacket Array +// +// Input: Offset - offset of the packet from the beginig +// of the client buffer. +// Output: Length - is set to the actual length of the packet +// (For IN transfers). +// Status: error that occurred during transmission or +// reception of the packet. +// + +typedef struct _USBD_ISO_PACKET_DESCRIPTOR { + ULONG Offset; // INPUT Offset of the packet from the begining of the + // buffer. + + ULONG Length; // OUTPUT length of data received (for in). + // OUTPUT 0 for OUT. + USBD_STATUS Status; // status code for this packet. +} USBD_ISO_PACKET_DESCRIPTOR, *PUSBD_ISO_PACKET_DESCRIPTOR; + +struct _URB_ISOCH_TRANSFER { + // + // This block is the same as CommonTransfer + // + struct _URB_HEADER Hdr; // function code indicates get or set. + USBD_PIPE_HANDLE PipeHandle; + ULONG TransferFlags; + ULONG TransferBufferLength; + PVOID TransferBuffer; + PMDL TransferBufferMDL; // *optional* + struct _URB *UrbLink; // *optional* link to next urb request + // if this is a chain of commands + struct _URB_HCD_AREA hca; // fields for HCD use + + // + // this block contains transfer fields + // specific to isochronous transfers + // + + // 32 bit frame number to begin this transfer on, must be within 1000 + // frames of the current USB frame or an error is returned. + + // START_ISO_TRANSFER_ASAP flag in transferFlags: + // If this flag is set and no transfers have been submitted + // for the pipe then the transfer will begin on the next frame + // and StartFrame will be updated with the frame number the transfer + // was started on. + // If this flag is set and the pipe has active transfers then + // the transfer will be queued to begin on the frame after the + // last transfer queued is completed. + // + ULONG StartFrame; + // number of packets that make up this request + ULONG NumberOfPackets; + // number of packets that completed with errors + ULONG ErrorCount; + USBD_ISO_PACKET_DESCRIPTOR IsoPacket[1]; +}; + + +typedef struct _URB { + union { + struct _URB_HEADER + UrbHeader; + struct _URB_SELECT_INTERFACE + UrbSelectInterface; + struct _URB_SELECT_CONFIGURATION + UrbSelectConfiguration; + struct _URB_PIPE_REQUEST + UrbPipeRequest; + struct _URB_FRAME_LENGTH_CONTROL + UrbFrameLengthControl; + struct _URB_GET_FRAME_LENGTH + UrbGetFrameLength; + struct _URB_SET_FRAME_LENGTH + UrbSetFrameLength; + struct _URB_GET_CURRENT_FRAME_NUMBER + UrbGetCurrentFrameNumber; + struct _URB_CONTROL_TRANSFER + UrbControlTransfer; + + #if (_WIN32_WINNT >= 0x0600) + + struct _URB_CONTROL_TRANSFER_EX + UrbControlTransferEx; + + #endif + + struct _URB_BULK_OR_INTERRUPT_TRANSFER + UrbBulkOrInterruptTransfer; + struct _URB_ISOCH_TRANSFER + UrbIsochronousTransfer; + + // for standard control transfers on the default pipe + struct _URB_CONTROL_DESCRIPTOR_REQUEST + UrbControlDescriptorRequest; + struct _URB_CONTROL_GET_STATUS_REQUEST + UrbControlGetStatusRequest; + struct _URB_CONTROL_FEATURE_REQUEST + UrbControlFeatureRequest; + struct _URB_CONTROL_VENDOR_OR_CLASS_REQUEST + UrbControlVendorClassRequest; + struct _URB_CONTROL_GET_INTERFACE_REQUEST + UrbControlGetInterfaceRequest; + struct _URB_CONTROL_GET_CONFIGURATION_REQUEST + UrbControlGetConfigurationRequest; + + #if (_WIN32_WINNT >= 0x0501) + + struct _URB_OS_FEATURE_DESCRIPTOR_REQUEST + UrbOSFeatureDescriptorRequest; + #endif + + }; +} URB, *PURB; + +#if _MSC_VER >= 1200 +#pragma warning(pop) +#endif + + +#endif /* __USB_H__ */ + -- cgit v1.1