cpu instruction sets are one of my special interests. whitequark posted about a weird instruction set. so of course i asked for a copy of the binary. it indulged me! it's called `noes`, who knows why.
> ls -al noes
-rw-rw-r-- 1 iximeow iximeow 12935 May 23 18:12 noes
so, 12.6KiB of some firmware for a headset or something, and an otherwise unknown instruction set. this is catnip, to me. and so here is where i started:
00000000   BC 60 BB 68  E4 E3 E5 ED  E2 8F E3 01  28 42 99 03  43 91 05 D4  C4 BC 69 BB  .`.h........(B..C.....i.
00000018   BC 26 BE E0  04 C8 41 F0  E0 44 C8 40  F0 E0 BB C8  51 F0 E0 94  C8 50 F0 EC  .&....A..D.@....Q....P..
00000030   E3 ED BF D8  0E BC E0 05  BF D0 0E C8  E3 ED CC 19  B9 E0 04 C8  41 F0 E0 64  ....................A..d
00000048   C8 40 F0 E0  BB C8 51 F0  E0 77 C8 50  F0 BC 47 04  E0 01 D2 E0  72 C8 43 F0  .@....Q..w.P..G.....r.C.
00000060   E0 BC C8 42  F0 E0 BB C8  53 F0 E0 D3  C8 52 F0 E4  01 BF 90 75  BC E9 72 E8  ...B....S....R.....u..r.
00000078   99 B7 90 03  BC E9 72 E2  1C E3 00 E0  72 C8 43 F0  E0 E7 C8 42  F0 E0 BB C8  ......r.....r.C....B....
00000090   53 F0 E0 B4  C8 52 F0 BC  C0 72 E0 13  C8 20 B5 E0  EC C8 1F B5  BC 59 40 E1  S....R...r... .......Y@.
000000A8   08 E8 48 B6  79 90 0A 28  C8 4C B6 C8  4B B6 BC 3C  6B E8 48 B6  90 07 C8 4C  ..H.y..(.L..K..<k.H....L
000000C0   B6 28 C8 4B  B6 BC BD 6B  BC E4 61 E0  12 7A 28 4B  99 04 E0 12  90 07 14 71  .(.K...k..a..z(K.......q
000000D8   E8 41 B5 59  49 C8 41 B5  E1 00 C9 42  B5 00 00 BC  A2 57 BF D0  0E C8 C2 B9  .A.YI.A....B.....W......
000000F0   CC C1 B9 CA  C3 B9 E8 F9  B4 22 98 03  BC 2D 33 BC  DA 32 86 12  76 E8 0B B4  ........."...-3..2..v...
00000108   7E 99 04 76  BC 75 BC E9  0C B4 16 79  99 03 EE 0C  B4 E9 0C B4  16 59 49 76  ~..v.u.....y.........YIv
00000120   EA 0C B4 E3  00 E8 0B B4  E1 00 59 4A  72 11 4B 73  83 82 16 72  E3 00 FC 08  ..........YJr.Ks...r....
00000138   81 E1 FF 51  89 80 E0 FF  09 71 88 BF  EC AC 8A 8B  BF 9D AC C9  DD EE C8 DC  ...Q.....q..............
00000150   EE 8E B9 E7  01 BC 2D 2E  86 E1 FF E8  ED B4 79 90  44 BF 52 32  76 90 1D E0  ......-.......y.D.R2v...
00000168   54 C8 57 F3  E0 19 C8 56  F3 28 C8 53  F3 00 C8 52  F3 71 E8 50  F3 19 C8 50  T.W....V.(.S...R.q.P...P
00000180   F3 BC 01 BD  16 74 BF B6  28 71 98 19  E1 FE E8 50  F3 21 C8 50  F3 28 C8 ED  .....t..(q.....P.!.P.(..
00000198   B4 E0 08 C8  53 F3 28 C8  52 F3 BF 87  30 8E B9 E2  00 E0 04 C8  41 F0 E0 44  ....S.(.R...0.......A..D
000001B0   C8 40 F0 E0  BB C8 51 F0  E0 94 C8 50  F0 E1 01 12  19 72 E0 72  C8 43 F0 E0  .@....Q....P.....r.r.C..
000001C8   BC C8 42 F0  E0 BB C8 53  F0 E0 D3 C8  52 F0 E1 02  12 19 72 E0  40 C8 45 F0  ..B....S....R.....r.@.E.
000001E0   E0 50 C8 44  F0 E0 BB C8  55 F0 E0 F6  C8 54 F0 E1  04 12 19 72  E0 6A C8 47  .P.D....U....T.....r.j.G
000001F8   F0 E0 5E C8  46 F0 E0 BC  C8 57 F0 E0  03 C8 56 F0  E1 08 12 19  72 E0 61 C8  ..^.F....W....V.....r.a.
00000210   49 F0 E0 E1  C8 48 F0 E0  BC C8 59 F0  E0 24 C8 58  F0 E1 10 12  19 72 E0 57  I....H....Y..$.X.....r.W
00000228   C8 4B F0 E0  89 C8 4A F0  E0 BC C8 5B  F0 E0 27 C8  5A F0 E1 20  12 19 72 E0  .K....J....[..'.Z.. ..r.
00000240   32 C8 4D F0  E0 C8 C8 4C  F0 E0 BC C8  5D F0 E0 46  C8 5C F0 E1  40 12 19 72  2.M....L....]..F.\..@..r
00000258   E0 17 C8 4F  F0 E0 53 C8  4E F0 E0 BC  C8 5F F0 E0  5E C8 5E F0  E1 80 12 19  ...O..S.N...._..^.^.....
00000270   72 CA 60 F0  E2 00 E0 2E  C8 21 F0 E0  1C C8 20 F0  E0 BC C8 31  F0 E0 AF C8  r.`......!.... ....1....
00000288   30 F0 E1 01  12 19 72 E0  A7 C8 25 F0  E0 66 C8 24  F0 E0 A7 C8  35 F0 E0 7E  0.....r...%..f.$....5..~
i also often think about [this lovely writeup](https://www.robertxiao.ca/hacking/dsctf-2019-cpu-adventure-unknown-cpu-reversing/) from Robert Xiao on a similar problem presented as a Dragon CTF teaser challenge a few years ago. working from an unknown data encoding all the way out to an instruction set and high level behavior is certainly _possible_, but it's not an opportunity that comes up often. it sounds fun! so i decided to chew on `noes` with as little context as i could have - the opportunity doesn't come up too often! ### which way is up? even just at the bottom of this first window it's clear there's some kind of structure to this thing. but if it's code or data, who knows. i did luck out that the terminal size i happened to open `noes` with showed some structure, otherwise i'd have resorted to the same age-old trick of "resize the window until it looks right". so there's some structure, the file is kind of tiny, the file is notionally a firmware for a processor, so presumably the processor also is kind of tiny. the bytes here are not obviously an 8080/6502/etc. probably not a tiny ARM core, because the repetition at the end of the above is offset by 1: this processor must be OK with instructions at odd addresses. scrolling through the file for anything else interesting and this stands out:
00001358   B9 80 81 82  83 84 85 E8  E6 B0 80 E8  E7 B0 80 E8  E8 B0 80 E8  E9 B0 80 E8  ........................
00001370   EA B0 80 E8  EB B0 80 E8  EC B0 80 E8  ED B0 80 E8  EE B0 80 E8  EF B0 80 E8  ........................
00001388   F0 B0 80 86  87 E1 03 E8  59 F3 21 98  3D BF 8E 31  BC 2E CF 80  81 82 83 84  ........Y.!.=..1........
000013A0   85 E8 E6 B0  80 E8 E7 B0  80 E8 E8 B0  80 E8 E9 B0  80 E8 EA B0  80 E8 EB B0  ........................
000013B8   80 E8 EC B0  80 E8 ED B0  80 E8 EE B0  80 E8 EF B0  80 E8 F0 B0  80 86 87 BF  ........................
000013D0   CD DF 8F 8E  88 C8 F0 B0  88 C8 EF B0  88 C8 EE B0  88 C8 ED B0  88 C8 EC B0  ........................
000013E8   88 C8 EB B0  88 C8 EA B0  88 C8 E9 B0  88 C8 E8 B0  88 C8 E7 B0  88 C8 E6 B0  ........................
00001400   8D 8C 8B 8A  89 88 BA E8  F3 B4 C8 5C  ED E8 F2 B4  C8 5B ED B9  E0 03 C8 0D  ...........\.....[......
this is different, which makes it interesting! this is a long span of bytes with very few ascii bytes, unlike the rest of the file which has a more frequent mix of bytes in `[0, 255]`. the content starts with an increasing series, `80 81 82 83 84 85 E8 E6 B0 80 E8 E7 B0 80 ...`, and towards the end has `8D 8C 8B 8A 89 88`. this might be data? maybe a lookup table? there are other regions of clear structure, like:
00002478   6A F1 ED 6B  F1 12 E9 6C  F1 21 72 13  E9 6D F1 21  73 14 E9 6E  F1 21 74 15  j..k...l.!r..m.!s..n.!t.
00002490   E9 6F F1 21  75 12 E9 25  EE 21 72 13  E9 26 EE 21  73 14 E9 27  EE 21 74 15  .o.!u..%.!r..&.!s..'.!t.
000024A8   E9 28 EE 21  75 CA 68 F1  CB 69 F1 CC  6A F1 CD 6B  F1 12 1B 1C  1D 98 07 E4  .(.!u.h..i..j..k........
but what does `21 72 13 E9` mean? or `21 73 14 E9`? `21 74 15 E9`? maybe four-byte instructions with different operands? ok. time to break out the big tools.
# iximeow> xxd -ps noes | head -n 20
bc60bb68e4e3e5ede28fe30128429903439105d4c4bc69bbbc26bee004c8
41f0e044c840f0e0bbc851f0e094c850f0ece3edbfd80ebce005bfd00ec8
e3edcc19b9e004c841f0e064c840f0e0bbc851f0e077c850f0bc4704e001
d2e072c843f0e0bcc842f0e0bbc853f0e0d3c852f0e401bf9075bce972e8
99b79003bce972e21ce300e072c843f0e0e7c842f0e0bbc853f0e0b4c852
f0bcc072e013c820b5e0ecc81fb5bc5940e108e848b679900a28c84cb6c8
4bb6bc3c6be848b69007c84cb628c84bb6bcbd6bbce461e0127a284b9904
e01290071471e841b55949c841b5e100c942b50000bca257bfd00ec8c2b9
ccc1b9cac3b9e8f9b4229803bc2d33bcda32861276e80bb47e990476bc75
bce90cb416799903ee0cb4e90cb416594976ea0cb4e300e80bb4e100594a
72114b7383821672e300fc0881e1ff518980e0ff097188bfecac8a8bbf9d
acc9ddeec8dcee8eb9e701bc2d2e86e1ffe8edb4799044bf523276901de0
54c857f3e019c856f328c853f300c852f371e850f319c850f3bc01bd1674
bfb628719819e1fee850f321c850f328c8edb4e008c853f328c852f3bf87
308eb9e200e004c841f0e044c840f0e0bbc851f0e094c850f0e101121972
e072c843f0e0bcc842f0e0bbc853f0e0d3c852f0e102121972e040c845f0
e050c844f0e0bbc855f0e0f6c854f0e104121972e06ac847f0e05ec846f0
e0bcc857f0e003c856f0e108121972e061c849f0e0e1c848f0e0bcc859f0
e024c858f0e110121972e057c84bf0e089c84af0e0bcc85bf0e027c85af0
e120121972e032c84df0e0c8c84cf0e0bcc85df0e046c85cf0e140121972
more structure to this, highlighting helps..
308eb9e200e004c841f0e044c840f0e0bbc851f0e094c850f0e101121972
e072c843f0e0bcc842f0e0bbc853f0e0d3c852f0e102121972e040c845f0
e050c844f0e0bbc855f0e0f6c854f0e104121972e06ac847f0e05ec846f0
e0bcc857f0e003c856f0e108121972e061c849f0e0e1c848f0e0bcc859f0
e024c858f0e110121972e057c84bf0e089c84af0e0bcc85bf0e027c85af0
e120121972e032c84df0e0c8c84cf0e0bcc85df0e046c85cf0e140121972
if `c8` marks the start of some instruction or sequence, the those sequences are something like:
c841f0e044 c840f0e0bb c851f0e094 c850f0e101 ...
... c843f0e0bc c842f0e0bb c853f0e0d3 c852f0e1 ...
and so seeing `41f0`, `40f0`, `51f0`, `50f0`, `43f0`, `42f0`, `53f0`, `52f0`, and others like it, immediately suggests something little-endian is happening. those might be offsets for a memory access? `e044`, `e0bb`, etc could be other immediates or operand selectors. maybe `c8` is an opcode itself? this is a great start: there's some kind of structure, something that looks like a workable guess for how at least one instruction is strucutred, values that look like addresses - or at least relative offsets. even if this is more data than code, there's enough structure here to chew on and learn more about the firmware. ### one instruction, to many instructions if i were stumped at this point i'd have started looking for common byte sequences, working through a list to guess what might be function prologues or epilogues, and go from there. but, being neither stumped nor interested in switching away from the next most advanced tool i have on hand - `xxd -ps noes | vim -` - i stuck with eyeballing common bytes. `8e` stuck out:
75bffce2fe0671fe0272fe0373f219d28e8fb98786ca56ef147615771674
1775bffce2ea56eff674bfe4448e8fb9878628c857eec856eee412bf14e9
761177e010de03e20016741775bf5f058e8fb9e8e9ed9803bccfe2e85aee
e95bee19982de855eec84befc94defe85aeec84cefe268e3eee461e5eebf
dfe3ea5aeeeb5beefa079026c85beec85aeebcc0e3e854eec84befe859ee
c84defe858eec84cefe268e3eee461e5eebfdfe3e001c84befe85deec84d
and in fact the longer common sequences are `8e8fb98786`:
75bffce2fe0671fe0272fe0373f219d28e8fb98786ca56ef147615771674
1775bffce2ea56eff674bfe4448e8fb9878628c857eec856eee412bf14e9
761177e010de03e20016741775bf5f058e8fb9e8e9ed9803bccfe2e85aee
e95bee19982de855eec84befc94defe85aeec84cefe268e3eee461e5eebf
dfe3ea5aeeeb5beefa079026c85beec85aeebcc0e3e854eec84befe859ee
c84defe858eec84cefe268e3eee461e5eebfdfe3e001c84befe85deec84d
this shows up across the file, but `8786` is only sometimes present. so maybe this is the epilogue of one function, and the prologue of the next? in which case the epilogue would be `8e8fb9` and the prologue is `8786`. then `b9` is `ret`? `8e8f` and `8786` are `pop` and `push` respectively? lets see if that gives us reasonably-sized functions. as some examples:
... 8e8fb9

8786cae5eecce6eee412bf14e9761177e8e6eede03e8e5eede04e20016741775bf5f058e8fb9

e200e45390d4b9e4f5e5edbf82c3e0d4c85cefe0e8c85bef28c85eefe003
[ 210 bytes ]
bf2bd78e8fb9

e500e406e260e3ed14e1005272110b73f27215527504e118
[ 240 bytes ]
19e0f2c8ecee177116c0c9eeeec8edeee1fff65172e412bf4bd48e8fb9

cc86f2cd87f2e004c882f2b928c855f3e01ac854f3e1fee850f321c850f3e0
[ 420 bytes ]
75bf8cdaea0aef02ca0aefe199127991818e8fb9
nothing huge, seems like a workable assumption. ### a virtuous cycle with a guess of function prologues ane epilogues, i can guess at the instructions around the entry/exit of these "theoriezed functions". some more looking around, `c8` is pretty common and seems to be followed by two bytes that might be an address?
52e8ec76edbfdee6e876ed9805e401bc52e8b928c806eec805eec847eee8
03f3619016e003c84beee001c84aeee140e8a3f919c8a3f9bc3b60e102e8
4aee799026e003c84beee8eded9805e008c803f3e008c88cf971e898f919
c898f9e1bfe8a3f921c8a3f9b9e010c803f3bf9f5ce108e898f919c898f9
e1bfe8a3f921c8a3f9e001c846eeb98786e101e847ee79902c28c847eee4
05e5eebf82c3e0c8c852b9e071c851b9e001c854b9e0f4c853b9e201e400
bf9513c906eec805eee102e8e6ed799003bf2dc2e2cce342e85bede95ced
there are definitely other `c8`s here that don't make sense yet, but `06ee .. 05ee` and `4bee .. 4aee` look like sequential addresses, and `03f3` shows up a few times which suggests these addresses are probably absolute. in-between there are several `e0` followed by a relatively low byte, `e001` between two `c8` sequences, `e008`, `e010`, an `e071` once. the second byte might be an immediate, maybe an offset? the values tend towards bitmasks, for whatever reason. this also happens with `e1` and an `e2` in the same region:
52e8ec76edbfdee6e876ed9805e401bc52e8b928c806eec805eec847eee8
03f3619016e003c84beee001c84aeee140e8a3f919c8a3f9bc3b60e102e8
4aee799026e003c84beee8eded9805e008c803f3e008c88cf971e898f919
c898f9e1bfe8a3f921c8a3f9b9e010c803f3bf9f5ce108e898f919c898f9
e1bfe8a3f921c8a3f9e001c846eeb98786e101e847ee79902c28c847eee4
05e5eebf82c3e0c8c852b9e071c851b9e001c854b9e0f4c853b9e201e400
bf9513c906eec805eee102e8e6ed799003bf2dc2e2cce342e85bede95ced
so maybe `eX` is a whole range of instructions with one-byte immediates? with this, lets see how a hypothesized function breaks apart..
87 86
14761577f698 19e0f2
c8ecee 177116c0 c9eeee c8edee e1ff f65172 e412 bf4bd4
8e 8f b9
7X is another one-byte instruction maybe? 1X too? calling `86` "push A" and `87` "push B", similarly with `8e 8f`, that gives us:
87 86                       ; push B; push A
14 76 15 77 f698 19e0f2
c8ecee 17 71 16 c0 c9eeee c8edee e1ff f651 72 e412 bf4bd4
8e 8f b9                    ; pop A; pop B; ret
checking that other blocks seem to break apart reasonably as "functions", this is how vim starts to look. knowing `c8XXXX` is an instruction in turn makes other instructions more clear:
87 86
28 c809ef 72 e461 e5ee bf29e3       ; 28 looks like something, 72 looks like something, bf?
e200 e468 e5ee bf29e3 bf2ae0 bffedc ; bf?
28 76 77 e84cee e94dee e201a
6939384290fac923f5c822f5e101e826f519c826f5c981f1e850f1649806 ; dunno about these
28c878ed9818e803f3619807e001c809ef900bc6e1081679e107174991bc ; dunno about these
bf4fdde826f56090fabf33e1e0072f9008e0082e9003bf2dc2e809ef9803 ; dunno about these
bf2bd7
8e 8f b9 ; but an epilogue
lots that would be too early to guess about, but `28` seems like a functional instruction, as does `72`. `bf` might be a relative load or store? if this is a vaguely normal 8-bit CPU, there ought to be conditional relative branches around somewhere too, which can help point towards instruction boundaries. most relative branches are short, either in the positive or negative direction (for loops), so that's worth keeping in mind. keeping an eye out is the best option, not really sure how to proactively find them. at the very least, it's probably not `e0..e7` as the conditional branches, because the following byte is sometimes `ff` (branch `$-1`??) or `00` (branch `$`???) continuing on, picking function boundaries somewhat arbitrarily on "seen `b9`", this is illustrative:
... snip ...
b9

; new function?
e500 e406 e260 e3ed 14 e100 52 72   ; 14, 52, also 72 instructions?
110b 73f2 7215 52 7504 e118         ; not sure if this makes sense
14 79 91e8 15
b9                                  ; ret

; new function?
28 c83bb5 e0fc c83cb5 28 c83db5 c83eb5 c842b5 e017 c841b5
e0ed c840b5 e061 c83fb5 bfded5 c865ed bf314d 71 9003 e006 b9

28 b9                               ; something, ret

; new prologue
86 ...more...
`28 b9` seems too short to be a function (why call to `28`? if you want `28` just inline it), so that's noteworthy. but 9003 is 3 bytes before it. 9003 as a `jz $+3`? and `28 b9` is an alternate ret? that skips over `e006; ret`? seems workable. so 90XX as conditional branch... here's a function i'd guessed at instruction boundaries for early on, and i'd gotten wrong:
87 86
cc27efcd28ef28 c8f1b0 e002 c863ef e05a c862ef
cd65ef 14 cc64ef e201 e400 bf83e9 76 11 77 71 16 19 90 03 bf420b e8f1b0 ; 9003 is one instruction, not two
98fb
8e 8f b9
fixing that up with what i know now it looks more like...
87 86
cc27efcd28ef28 c8f1b0 e002 c863ef e05a c862ef
cd65ef 14 cc64ef
e201 e400 bf83e9 76 11 77 71 16 19
9003 bf420b                                     ; jCC $+3
e8f1b0
98fb                                            ; is this jCC $-5?
8e 8f b9
so maybe 9X is a whole family of conditional branches? plausible...
e008 c803f3 bf52d8 28 c8e6ed c8eeed
8eb9e8eded9001                        ; hadn't noticed this 9001 at first. conditional branch over a ret?
b9 28 c8eeed c8eded
e4f1 e5ed bf82c3 bffedc bf106f
adjusting that a bit:
e008 c803f3 bf52d8 28 c8e6ed c8eeed
8eb9e8eded
9001 b9
28 c8eeed c8eded
e4f1 e5ed bf82c3 bffedc bf106f
finding other interesting patterns around 9Xs, this function:
87 86 15 71 14 e304 53 9101 0176              ; 91XX as jCC?
1177 e101 fe01 79 e104 f679 9034 e102 fe01
79 9006 bf3cd5bccdc7e101fe01                  ; 79 is a test or cmp or sub maybe?
79 9803 bccdc7e1f7e854f121c854f1e400bffa48e1fde856f121c856f1bf
17d5bccdc7e110f6799034e850f164986c e101 fe01
79 900f e401 bf67c5
e200 e41f bf2b31 bccdc7 e102 fe01 79 904f
e200 e423 bf2b31 e850f1 62 983d e400 983b e102 f679 90 38 e850f1 64 9832 fe01 79 9018 e108 e854f1 19 c854f1
e401 bf67c5 e852f1 60 9819 e400 9812 e101 fe01 79 900e e1f7 e854f1 21 c854f1
e401 bf67c5
8e8fb9
following offsets for the proposed jCC in the third and fourth lines yields:
79 9006 bf3cd5bccdc7 e101 fe01                ; so fe01 is something (`feXX`?)
79 9803 bccdc7 e1f7 e854f1 21 c854f1 e400     ; bcXXXX (or more?) is something
bffa48e1fde856f121c856f1bf
incidentally in the literal next function that knowledge of `bf` breaks things up into another pattern,
86
e406 bf551b 76 980b e406 bf551b 76 9803 bf420b e406
bf8f4d 71 9003 bf420b e0ee c840b5 e0f3 c83fb5 28 c842b5 e016 c841b5
bf114d 71 9003 bf420b e812b1 e913b1 ea14b1 eb15b1
ecfcee 7c 9012 e8fdee 79900c
e8feee 7a 9006
e8ffee 7b 9803 bf420b e80db1 e90eb1 ea0fb1 eb10b1
ec05ef 7c 9012
e806ef 79 900c
e807ef 7a 9006
e808ef 7b 9803
bf420b 8eb9e400bf
this is great; `7x` definitely seems like it generates some kind of branch condition, and `9xXX` seems like a conditional branch based on that result. ### control flow!! from this point onward, i'll be marking up approximate level of nesting with indentation. for each branch over a byte of code, it will be indented an additional level. when the branch target is reached, unindent. for simple control flow this gives a general idea of how PC moves through a region. revisiting the above with this additional structure is immediately informative!
86
e406 bf551b   ; this and the 76 after are the same as the one two lines down
76 980b
  e406 bf551b ; doing something to r4? getting a condition out? does bf551b reference memory?
  76 9803
    bf420b
e406 bf8f4d
71 9003
  bf420b
e0ee c840b5
e0f3 c83fb5 28 c842b5
e016 c841b5
bf114d 71 9003
  bf420b
e812b1 e913b1 ea14b1 eb15b1 ecfcee
7c 9012
  e8fdee
  79 900c
    e8feee
    7a 9006
      e8ffee
      7b 9803
        bf420b
e80db1 e90eb1 ea0fb1 eb10b1 ec05ef
7c 9012
  e806ef
  79 900c
    e807ef
    7a 9006
      e808ef
      7b 9803
        bf420b
; note 8e b9 here, some kind of early ret?
; missed that at first!
8eb9 e400bf
52e8ec76edbfdee6e876ed9805e401bc52e8b928c806eec805eec847eee8
03f3619016e003c84beee001c84aeee140e8a3f919c8a3f9bc3b60e102e8
4aee799026e003c84beee8eded9805e008c803f3e008c88cf971e898f919
c898f9e1bfe8a3f921c8a3f9b9e010c803f3bf9f5ce108e898f919c898f9
e1bfe8a3f921c8a3f9e001c846ee
b9
reconsidering other lines, there's this from early on which is not obviously wrong but now clearly has an error:
79 9009 fe07 72 fe08 73 e015 d216 74 17 75 bfead9 bc3bdb 16 74 17 75 bfe605
      ^                        ^
      $+9 is an instruction    is $+9, the split was wrong
so this should be
79 9009 fe07 72 fe08 73 e015 d2 16 74 17 75 bfead9 bc3bdb 16 74 17 75 bfe605
      ^                         ^
      $+9 is an instruction     is $+9d
`16` is an instruction on its own, and so is `d2`. back to looking for interesting structures, and here's part of a larger function:
e108
e8d5ee
79 9113
  e1f8 51 72 e8d6ee e100
  9802          ; jump forward to 42..
    50 31 42
  99fb          ; jump backwards to 50..
  bc45eb
e9d5ee e008 59 49 71 e8d6ee bc40eb 69 38 41 99fb e100 76 11 77 e9d7ee
16 79 e9d8ee 17 49
9959
so there's a short loop, the loop's body is `50 31 42`, and some condition means the loop is entered skipping `50 31`. different topic for a moment, there are lots of e8XXXX/c8XXXX. what's going on with that? something to orient with...
87 86
28
c8f4b0
bf03bd
e013 c820b5
e0ec c81fb5
bfbfe6
e0ce c8c2b4
e0af c8c1b4
e434 bf8f4d
71 9003
  bc87c0
e83bb5 c807ee ; the immediates here are interesting actually
e83cb5 c808ee ; incrementing by 1
e83db5 c809ee ; on the first and second instruction
e83eb5 c80aee ; 0xb53e, 0xee0a ?
bf2fd6
bfdcdb
bfc62e
e101 799803bc38c0e803f3609809e841b6e942b6
## loads/stores!! `e8 XXXX` is probably a load! then `c8 XXXX` is a store! might be an absolute 16b address then? does that suggest `e0` is a relative load? maybe some kind of banked load. seems like `c9` is also a store, probably all c8-cf and e8-ef are store/load?
bf8ac0 e1fe e850f3 21 c850f3
b9 28 c8feed c8fded 72 e449 bcc2d4
e829b4 c863ef                       ; another 32b copy
e828b4 c862ef
e825b4 c865ef
e824b4 c864ef
e200 e400
bf83e9
c9f2ed c8f1ed e8f1ed e9f2ed         ; [edf2]->r1; [edf1]->r0; r0->[edf1]; r1->[edf2]? this is wrong
bc8ad9
e40e
bf4204
c929b4 c828b4                       ; again, storing and then loading later?
e00d
ea28b4 eb29b4                       ; but ea/eb would be r4, r5 maybe
elsewhere is another interesting sequence, annotating by the theory so far,
e1bf    ; r1<-[...0xbf]
e823f2  ; r0<-[0xf223]
21      ; ???
c823f2  ; [0xf223]<-r0
` this is great: control flow, loads/stores, this is enough to start finding where registers are read and written, and start figuring out arithmetic or other operations. ## it does, in fact, have an ALU so `21` is maybe, `op r0, r1`? `21` can't encode two registers (would be `001y yzzz`? not enough space to say `r4, r5` here). so might be an implicit r0. `28` is a different `op2 r0, r0`? consider
e803f3    ; r0<-[0xf303]
60 9009   ; also 60: generates a status from r0?
  28      ; definitely an instruction
  c83dee  ; [0xee3d]<-r0
  e001    ; r0<-[..0x01]
  c85aed  ; [0xed5a]<-r0

  bfd547
  71
98fa
`28` might be `xor r0, r0`, it's often precedes a `c8` store:
87 86
28 c8f4b0         ; xor r0, r0 (?); [0xb0f4]<-r0
bf03bd
e013 c820b5
... ...
b9                ; ret
28                ; first instruction in the block? function?
c8feed c8fded     ; [0xedfe]<-r0; [0xedfd]<-r0
72 e449 bcc2d4    ; op r0, r2; r4<-[..0x49]; ??
e829b4 c863ef
e828b4 c862ef
e825b4 c865ef
e824b4 c864ef
`78` is not present as an instruction it seems, `79` is?
bfc62e    ; unknown
e101      ; r1<-[..0x01]
79 9803   ; op r0, r1?; jCC $+3
  bc38c0  ; unknown
e803f3    ; r0<-[0xf303]
`7a` is a single-byte instruction, as is `74` and `b4`:
29 4c 912d
  ea5bed eb5ced e048 e120 ; r2<-[0xed5b]; r3<-[0xed5c]; r0<-[..0x48]; r1<-[..0x20]
  7a e080 2b              ; 28 seems like xor r0, r0, so 2b is xor r0, r3?
  74 e080 29              ; 29 as xor r0, r1?
  4c 9118
    e850f1
    64 9012
      bf2bd7
      28 c810f2 c885f2 c884f2
      74 75 bf03d7
bfc62e e101
79 981b
  e10f e8b0b4
  79 9009
    e8b1 b4 62 9803 61 900a
fishing around to find more about the `1X` and `2X` opcodes, this region is interesting:
62 9811
  e108 e854f1             ; r1<-[..0x08]; r0<-[0xf154]
  19                      ; op r0, r1? ;
  c854f1                  ; [0xf154]<-r0; maybe 0001_1xxx is add?
  e852f1                  ; r0<-[0xf152]
  60                      ; something on r0 producing a condition..
  9802
    e600                  ; 1110_0xxx yyyyyyyy may actually be "load imm8 into rX"
16                        ;
74 bf67c5
                          ; the sequence here is eventful
e18f                      ; r1<-0x8f
e825f2                    ; r0<-[0xf225]
21                        ; op r0, r1
e170                      ; r1<-0x70
19                        ; op r0, r1
c825f2                    ; [0xf225]<-r0
e008 c803f3 bf52d8
28 c8e6ed c8eeed
some evidence that `21` may be and specifically:
e1bf      ; r1<-0xbf
e823f2    ; r0<-[0xf223]
21        ; op r0, r1     ; if op were add, presumably there is a sub, why not sub 0x40?
c823f2    ; [0xf223]<-r0  ; and masks bits, makes somewhat more sense...
is `78`..`7f` is `cmp/test/sub r0, rN`:
e812b1 e913b1 ea14b1 eb15b1
ecfcee
7c 9012           ; is [0xeefc] == [0xb112]?
  e8fdee
  79 900c         ; is [0xeefd] == [0xb113]?
    e8feee
    7a 9006       ; is [0xeefe] == [0xb114]?
      e8ffee
      7b 9803     ; is [0xeeff] == [0xb115]?
        bf420b
e80db1 e90eb1 ea0fb1 eb10b1
ec05ef
7c 9012           ; is the same for [0xb10d..0xb110] == [0xef05..0xef08]
  e806ef
  79 900c
    e807ef
    7a 9006
      e808ef
      7b 9803
        bf420b
8e b9
notably `78` does not seem to appear as an instruction. preference for `xor r0, r0 (0x28)`? or not sub? this may help make sense of operand ordering as well,
87 86             ; push r7; push r6
14 76 15 77 f698  ; mov r4, r0; sub r0, r6, r6; mov r5, r0; sub r0, r7, r7
19 e0f2 c8ecee    ; mov r0->r1; r0<-0xf2; r0->[0xeeec]
17                ; this is why it's likely that the selected register is a destination, 17 would
                  ; be mov r0, r7. if 77 modified r0, r7 would be unmodified, and 77 would be dead
                  ; code. instead if 77 modifies r7, this moves `r7_in - r5` into r0
71                ; then this subtracts from r1, preservation of r0 after f698 (or 15)
                  ; otherwise 19 would be pointless
16                ; r6->r0
c0                ; ???
c9eeee            ; why it would modify from r1, `[0xeeee]<-r1`
c8edee            ; and `[0xeeed]<-r0`
e1ff f651
72 e412 bf4bd4
8e 8f b9
but does any of this mean:
c83bef      ; [0xef3b]<-r0
c93cef      ; [0xef3c]<-r1
ca3def      ; [0xef3d]<-r2
cb3eef      ; [0xef3e]<-r3
e825ee      ; r0<-[0xee25]
e93bef      ; r1<-[0xef3b]
19 c825ee   ; op r0, r1; [0xee25]<-r0 ; 18..1f is likely not add, sub, could be adc/sbc, maybe `or`
e826ee      ; r0<-[0xee26]
e93cef      ; r0<-[0xef3c]
19 c826ee   ; op r0, r1; [0xee26]<-r0 ; if 19 is `or`, this is computing or of two 32 regions
e827ee      ; r0<-[0xee27]
e93def      ; r1<-[0xef3d]
19 c827ee   ; op r0, r1; [0xee27]<-r0
e828ee      ; r0<-[0xee28]
e93eef      ; r1<-[0xef3f]
19 c828ee   ; op r0, r1; [0xee28]<-r0
ea3bef      ; r2<-[0xef3b]            ; then .. something?
eb3cef      ; r3<-[0xef3c]
ec3def      ; r4<-[0xef3d]
ed3eef      ; r5<-[0xef3e]
80 e837ef   ; op; r0<-[0xef37]
2280        ; op r0, r2; op
e838ef      ; r0<-[0xef38]
2373        ; op r0, r3; op r0, r3
e839ef      ; r0<-[0xef39]
2474        ; op r0, r4; op r0, r4
e83aef      ; r0<-[0xef3a]
2575        ; op r0, r5; op r0, r5
or this:
e876b4      ; r0<-[0xb476]
e977b4      ; r1<-[0xb476]
c8e6b0      ; [0xb0e6]<-r0
c9e7b0      ; [0xb0e7]<-r1
28 c8e8b0   ; [0xb0e8]<-0
c8e9b0      ; [0xb0e9]<-0
72 73
e9d8ee      ; r1<-[0xeed8]
e8d7ee      ; r0<-[0xeed7]
bff5ec      ; ?
ecd5ee      ; r4<-[0xeed5]
bc63ea
            ; so this loop is... do { X r1, X r3, X r2, X r1, X r0, X r4 } while cond(r4)?
  69 3b 3a 39 38 44
99f8
ecd3ee 5474 e8d4ee 097114
c999b4
c898b4
e8daee
c877b4
e8d9ee
c876b4
`18..1f` seem like `r0 |= rX`:
e835ef e932ef 19 e933ef 19 e934ef 19
9019
where `19` would mean this `or`s all four bytes and checking for.. zero? non-zero? ## inc/dec is a loop's best friend and maybe 4X is dec? shr? `40` agrees, here's a branch table or smth?
9814
  11 19
  9810
    40 98b6
    40 98ba
    40 98d8
    40 98db
    40 98df
    40
bf57d0 bfbfcf
seems like `40` is `dec r0`, consider this loop:
  e103
  e87fb4
  21              ; op r1
  74              ; op r4
  e500            ; r5<-0x00
  e00b            ; r0<-0x0b
loop:
    69 34 35 40   ; op r1?; op? r4; op? r5; dec r1
  90 fa           ; jnz loop
so 0100_0XXX seems like `dec rN`. 0011_0XXX may be `inc rN`? and what is 0x69. some more about the low 7Xs:
86
14 76 e8e2ed    ; r4->r0? ; ...??? r6; r0<-[0xede2] .. maybe 76 is xchg r0, r6?
7e 9817         ; 7e is maybe "compare r0 and r6"; jz?
  e003 c858ef e0ff c859ef ce5aefe458e5efbfded6cee2ed
8e b9
since other ops seem oriented around operations on r0 and modifying r0, the low `7x`'s might be moving from `r0` to a different register? in contrast to low `1x` which move into r0. for example in the partially-disassembled snippet,
r1 <- 0x04
r0 <- r2
r0 |= r1
op7x.lo r0, r2
r0 <- 0x32
[0xf029] <- r0
it's loaded `r0`, modified it, and would clobber it after the unknown op. `op7x.lo` must at least read `r0` and write `r2` or other state. there aren't any other instructions to read flags or anything before the next `op7x.lo`,
r1 <- 0x10
r0 <- r2
r0 |= r1
op7x.lo r0, r2
so it could be an add/sub to store back into r2, but the `or` wouldn't make sense. if the `r0` is the only register that can be modified by arithmetic instructions - instructions seem small so there's not much encoding space - then modifying a value would look like "copy to r0, modify, copy back". meanwhile `78..7f` is probably a `cmp` (rather than `sub`): in a sequence like
  r1 <- 0x03
  r0 <- [0xb475]
  op7xhi r0, r1   ; byte 0x79
  jcc.lo.0 $+0x10 ; bytes 9010, destination `dest`
  r1 <- 0x04
  r0 <- [0xeed2]
  op7xhi r0, r1
  jcc.hi.0 $+0x08
  r0 <- 0x03
  [0xeed2] <- r0
  op.bc ec2c
dest:
  r1 <- 0x03
so if `op7xhi r0, r1` modified the destination, that modification is clobbered. it generates flags (consumed by `jcc.lo.0`). `79` is a very common prefix to `90xx` or `98xx` branches, but uncommon to stand alone. counterpoint though, sequences like
e100            ; r1 <- 0x00
bfecac          ; unknown
c9dfee c8deee   ; [0xeedf] <- r1; [0xeede] <- r0
e8eded 902f     ; r0 <- [0xeded]; jcc $+0x2f?
have a useful branching condition with only loads (barring `bfecac` generating a status). and even if `bfecac` did generate a status, the next code if this is taken would be
e8e8ed 9841     ; r0 <- [0xede8]; jcc $+0x41
so either the `e8` load is enough to generate a status or the `98` branch is fully determined from the ealier `bfecac`. it's possible; the branches could be a pair like `jnz` and `ja`, where there is a third reasonable condition (`jb`) that becomes the implicit third outcome. but in that case why `e8e8ed` before the branch? so perhaps the `90`/`98` conditions are predicated fully on the contents of `r0`? ah, still unsure about `bf`, but this seems useful:
86
14 76 e8e2ed
7e 9817
  e003 c858ef   ; [0xef58] <- 0
  e0ff
  c859ef ce5aef ; [0xef59] <- 0; [0xef5a] <- 0xff
  e458          ; r4 <- 0x58
  e5ef          ; r5 <- 0xef ; so r5 and r4 together hold `ef58`, just assigned
  bfded6        ; consumes r4, r5, writes r6?
  cee2ed        ; [0xed2e] <- r6
8e b9
# more subtle load/store? distracted by `fe01`. found this:
87 86       ; push r7; push r6
28 c83df3   ; xor r0, r0; [0xf33d] <- r0
e00a c83cf3 ; r0 <- 0x0a; [0xf33c] <- r0
28 c8c2ee   ; xor r0, r0; [0xeec2] <- r0
e6ca e7ee   ; r6<-ca; r7<-ee ; r7:r6 = 0xeeca
fe02 c837f3 ; fe02 ; [0xf337] <- r0
fe01 c836f3 ; fe01 ; [0xf336] <- r0
fe03 c838f3 ; fe03 ; [0xf338] <- r0
fe04 c839f3 ; fe04 ; [0xf339] <- r0
fe05 c83af3 ; fe05 ; [0xf33a] <- r0
fe06 c83bf3 ; fe06 ; [0xf33b] <- r0
f6 9827     ;
so `fe0X` writes to `r0`. before `feXX` are issued, `r6` and `r7 are often loaded with values that are also similar to nearby pointer values. so `r7:r6` usually forms a valid pointer. `fe00` does not exist in the image. is there a shorter instruction for a load of `[r7:r6 + 0]`? separately, looks like `deXX` is `store r0 to [r7:r6 + XX]`. consider this code:
87 86                   ; push r7; push r6
ca40ef cc41ef           ; [0xef40] <- r2; [0xef41] <- r4
e412 bf14e9 76 11 77    ; r4 <- 0x12; call? ; r0->r6; r1->r0; r0->r7
e072                    ; r0 <- 0x72
de03                    ; hmm
e841ef de04             ; r0 <- [0xef41]; hmm
e840ef de05             ; r0 <- [0xef40]; hmm
e83eee de06             ; r0 <- [0xee3e]; hmm
e200 16 74 17 75 bf5f05 ; e2 <- 00; r6->r0; r0->r4; r7->r0; r0->r5; call?
8e 8f b9                ; pop r6; pop r7; ret
so if the move of `r1:r0` to `r7:r6` is for a reason, that likely means: * the calling convention returns pointers as `r1:r0` * `deXX` might use `r7:r6`? then between each `deXX` the program only loads `r0` with an `e8XXXX`, so `deXX` does not modify `r0`. if it modifies other registers, it's not `r2` (clobbered later), not `r4`, `r5` (clobbered later). if it's an indirect store through `r7:r6` it doesn't seem to increment (if it does, this is a .... very strange access pattern). most likely seems to be `r0 -> [r7:r6 + imm8]`. that seems like a plausible function:
push r7; push r6;
[0xef40] <- r2; [0xef41] <- r4;
r4 <- 0x12; call 0xe914;
r1:r0 -> r7:r6                          ; grouped a few moves together for this overall effect
r0 <- 0x72;     [r7:r6 + 3] <- r0
r0 <- [0xef41]; [r7:r6 + 4] <- r0
r0 <- [0xef40]; [r7:r6 + 5] <- r0
r0 <- [0xee3e]; [r7:r6 + 6] <- r0
r2 <- 0x00; r7:r6 -> r5:r4; call 0x055f ; eliding more movs
pop r6; pop r7;
ret
and `18..1f` is `or`! here's another region:
e400 bf4204       ; r4 <- 0x00; call
76 11 77          ; r1:r0 -> r7:r6      ; similar to before: exact movs are r0->r6; r1->r0; r0->r7
71 16             ; r0 -> r1; r6 -> r0
19                ; unknown
9003              ; jcc $+3
  bf420b          ; call
e0ff de03         ; r0 <- 0xff; [r7:r6 + 3] <- r0
28 de04           ; xor r0, r0; [r7:r6 + 4] <- r0
e005 de05         ; r0 <- 0x05; [r7:r6 + 5] <- r0
28 de06           ; xor r0, r0; [r7:r6 + 6] <- r0
`bf4204` returned a pointer that would be used in `de03` and later, below. before it is used there though, `71 16 19` does something with the two bytes of pointer before conditionally calling(?) something(?). there aren't many useful operations on the two bytes. it's probably `or`, meaning `71 16 19` forms a null check, and there are likely other hits for that sequence... there are seven. four have the condition branch over a `bf420b`, so maybe `0xb42` is a fault handler? reset? some kind of trap. it probably doesn't return here since i'm certain that `r7:r6` is not useful for writing anyway. also, that tells us `90` is `jnz`. `98` then is probably `jz`. that's consistent with sequences from earlier, like
11 19 9810  ; r0 <- r1; r0 |= r1  ; jz $+10
40 98b6     ; dec r0              ; jz $-0x4a
40 98ba     ; dec r0              ; jz $-0x46
40 98d8     ; dec r0              ; jz $-0x28
40 98db     ; dec r0              ; jz $-0x25
40 98df     ; dec r0              ; jz $-0x21
implementing a branch table for `i` in `0..5`? # a multiplier! `69` and `38..3f` make more sense from this loop:
28 c8e8b0 c8e9b0    ; xor r0, r0; [0xb0e8] <- r0; [0xb0e9] <- r0;
72 73               ; r0 -> r2; r0 -> r3
e9d8ee e8d7ee       ; r1:r0 <- [0xeed7:0xeed8]
bff5ec              ; call
ecd5ee              ; r4 <- [0xee5d]
bc63ea              ; dunno
  69 3b 3a 39 38 44 ;  ??? but r3, r2, r1, r0, then dec r4
99f8                ; conditional branch to ???
so for each of `3b..38` it operates on `rN`, maybe `r0`. but if it accumulates into `r0`, why loop `r4` times? if `3b` mutates only `r3`, then there are few operations that make sense for all four registers: * not `adc/sbc` (add/sub X to each byte?) * could be `ror/rol` (operates on each byte independently) * `rcr` could be it, high bytes carry into lower * `rcl` could be it if endianness were such that the value is `r0:r1:r2:r3` * since it only rotates by one bit it may actually be called a shift through carry? if it's `rcr/rcl` then `69` clears the carry flag between loops so the loop implements a shift rather than rotate. assuming `38..3f` is `rcr` since `r3:r2:r1:r0` matches endianness seen elsewhere. seems like `fa` is similar to `fe`, but loading through `r3:r2` instead of `r7:r6`.
fe07 72 fe08 73 fa03 c872ed fa02 c871ed     ; [r7:r6 + 7..8] -> r3:r2; fa03; store [0xed72]; fa02; store [0xed71]
fe07 72 fe08 73 e004 d2 bceacc
fe07 72 fe08 73 e873ed da02                 ; [r7:r6 + 7..8] -> r3:r2; load [0xed73]; da02
fe07 72 fe08 73 e875ed da04 e874ed da03     ; [r7:r6 + 7..8] -> r3:r2; load [0xed73]; da02
`fa` might clobber `r3:r2`? again if it was "load and increment" or "store and increment" then the immediate offsets are very odd. could just be redundant loads of `r3:r2`? also from this, `da` looks similar to `de`: `store r0 to [r3:r2 + XX]`. `21` might be `and r0, r1`? `r1` seem to often have some immediate consecutive bitmasky thing loaded shortly before `21`. same for `22`. check this out:
f2 74
e001 e100 e200 e300 ; r3:r2:r1:r0 <- 0
9804                ; ???
  50 31 32 33       ; op ?r0?; op r1, op r2, op r3 - maybe
                    ; ` r0; rcl r1; rcl r2; rcl r3

  44                ; dec r4
99f9                ; conditional loop
ec2eef 24 80        ; load r4; op r4; push r0
e82fef 21 71        ; load r0; op r2; r0->r1
e830ef 22 72        ; load r0; op r2; r0->r2
e831ef 23 73        ; load r0; op r3; r0->r3
88                  ; pop r0
c832ef c933ef ca34ef cb35ef ; store r3:r0 -> [0xef32:0xef35]
looks like the loop is building up a 32b bitmask, `and`ing, then storing back? ok, different function:
  e408                ; r4 <- 8
back:
    69 3d               ; ccf; rcr r5
    911d                ; jcc.lo.1 forward
back:

      e8eab0 56 c8eab0  ; r0 <- [0xb0ea]; op5x r0, r6; [0xb0ea] <- r0
      e8ebb0 09 c8ebb0  ; r0 <- [0xb0eb]; op0x r0, r1; [0xb0eb] <- r0
      e8ecb0 0a c8ecb0  ; r0 <- [0xb0ec]; op0x r0, r2; [0xb0ec] <- r0
      e8edb0 0b c8edb0  ; r0 <- [0xb0ed]; op0x r0, r3; [0xb0ed] <- r0

      69                ; ccf
forward:
    36 31 32 33 44    ; something on r6, r1, r2, r3; dec r4
  90d8                ; jnz back
  b9                  ; ret
first observation: `91` is probably `jnc`. if it's `jc` then the loop would be entered with a carry flag set ... only on the first iteration. it seems more likely this is relying on knowing `cf` is unset to not execute `ccf` needlessly at the jump target. compared with other codegen, maybe this is a hand-written intrinsic? second observation: `30..37` might be `rcl`? whatever `56 .. 09 .. 0a .. 0b` does, the surrounding load/stores suggest that there's a 32b value in `r3:r2:r1:r6`. meanwhile, the loop operates on `r6:r1:r2:r3`. each op would then carry out to the next most significant byte, and this is similar to `rcr` already knwon to be `38..3f`. then if `30..37` is `rcl`, the loop implements ` << 8`. why is TBD, but it seems like a plausible high-level behavior. elsewhere, this helps explain `50`:
f6 74                         ; ; r0 -> r4
e001 e100 e200 e300           ; r3:r2:r1:r0 <- 00_00_00_01
9804                          ; jcc $+4
  50 31 32 33                 ; ; rcl r1; rcl r2; rcl r3

  44                          ; dec r4
99f9                          ; jcc $-7
c83bef c93cef ca3def cb3eef   ; [0xef3b:0xef3e] <- r3:r2:r1:r0
if `50` were `add r0, r0`, this implements `1u32 << r4` - `add r0, r0` is functionally the same as shifting `r0` left by 1 with highest bit carried out. it seems unlikely to be `adc`, because in other places `50` is used it seems that `cf` is indeterminate. this region also reinforces that `99` is `jnc`. if `99` were `jc` the loop would be taken at most once, but as `jnc` it is taken until `r4 == 0`. this in turn helps explain `08..0f`:
e408                    ; r4 <- 8
bit:
  69 3d 911d            ; ccf; rcr r5; jc clear
    e8eab0 56 c8eab0    ; add [0xb0ea], r6 ; (taking creative liberties with the isa)
    e8ebb0 09 c8ebb0    ; op [0xb0eb], r1
    e8ecb0 0a c8ecb0    ; op [0xb0ec], r2
    e8edb0 0b c8edb0    ; op [0xb0ed], r3

clear:
  69 36 31 32 33 44     ; ccf; rcl r6:r1:r2:r3; dec r4
90d8                    ; jnz bit
b9                      ; ret
so... this would be a 32b by 8b multiply.. but only if `op` is `adc`. for each set bit in `r5`, add `r6:r1:r2:r3` into `0xb0ea`. shift `r6:r1:r2:r3` left 1 regardless of bit being set in `r5`. repeat 8 times for each bit in `r5`. ... that said, the calling convention for this is different from every other function, and is moderately unhinged: why is `r4` unused? why is `r0` unused? why is `r6` *used*??? either way. `08..0f` is `adc`. but this function is weird enough to try figuring that out sooner than later. looking for the memory address referenced here, `0xb0ea` there's this region i'd looked at very early on that seems relevant:
c870ef c971ef
e878b4 e979b4 ec70ef 59 4c 74 11 e971ef 49 71 14 c977b4
c876b4 28 c8beb9 e0ea c8c0b9 e00d c8bfb9 e201 e405 bcc632 e105 e875b4
79 9004
  28 c8d2ee
b98485 86 e600        ; something; push r6; r6 <- 0
ceeab0                ; [0xb0ea] <- 0
ceebb0                ; [0xb0eb] <- 0
ceecb0                ; [0xb0ec] <- 0
ceedb0                ; [0xb0ed] <- 0
76 ede6b0             ; r0 -> r6 ; r5 <- [0xb0e6]
bf 2f                 ; op; op
ed ed e7b0bf 2f       ; ??
ed ed e8b0bf 2f       ; ??
ed ed e9b0bf 2f       ; ??
ed                    ; ??
e8eab0                ; [0xb0ea:0xbeed] <- r3:r2:r1:r0
e9ebb0
eaecb0
ebedb0
8e 8d 8c b9
but the whole thing in the middle is nonsense. taking a much closer look, though, this was before i'd learned... many things about the instruction set. first, on line 6 the first instruction is not `b98485`! it is just `b9` - `ret`. so this region is actually the end of one function and start of the next. `84 85 86` are pushes in the prologue of the real function of interest. additionally, `bf` is not a standalone instruction, it takes two bytes as an immediate to `call`. and `ed` is not an instruction on its own, it is `r5 <- [imm16]`. so lets delineate that correctly...
84 85 86 e600         ; push r4; push r5; push r6; r6 <- 0
ceeab0                ; [0xb0ea] <- 0
ceebb0                ; [0xb0eb] <- 0
ceecb0                ; [0xb0ec] <- 0
ceedb0                ; [0xb0ed] <- 0
76                    ; r0 -> r6
ede6b0 bf2fed         ; r5 <- [0xb0e6]; call 32x8b multiply?
ede7b0 bf2fed         ; r5 <- [0xb0e7]; call 32x8b multiply?
ede8b0 bf2fed         ; r5 <- [0xb0e8]; call 32x8b multiply?
ede9b0 bf2fed         ; r5 <- [0xb0e9]; call 32x8b multiply?
e8eab0                ; [0xb0ea:0xbeed] <- r3:r2:r1:r0
e9ebb0
eaecb0
ebedb0
8e 8d 8c b9
and so here we are: this function implements a 32b x 32 multiply of the integers in `b0ea:b0ed` and `b0e6:b0e9`, storing the result in `b0ea:b0ed`. notable mention to `r0`, which happens to be the low byte of the last round of multiplication, so the `e8eab0: [0xb0ea] <- r0` is in fact correctly storing the low byte of this whole thing to the output region. notable mention, too, to `76: r0 -> r6`, because by leaving `r0` free for clobber the inner multiply routine does not need to move the `r0` argument elsewhere to free `r0` for use in `add/adc`. and loads from memory are no more expensive (in terms of code size) when loading to an alternate register, so it's simple enough to load directly to `r6` for the to-multiply byte of reach step. ## what's left? OK. this is great progress so far. many instructions make sense, composition of those instructions seems reasonable. the only remaining encoding regions that are unknown are: * `00..07` * `48..4f` * `58..5f` * `60..6f`, except `69` (`ccf`) * `78..7f`: might be `cmp`, might be `sub`. need to find evidence one way or the other! * `a0..af`, seems not-present * `b0..b7`, seems not-present, except `b4` * `b8..bf`, except `b9`, `bc` (maybe jump?), `bf` * `c0..c7`, which is remarkably rare * `d0..df`, except `da`, `de`. seen but not understood: `db`, `dc` * `f0..ff`, except `fa`, `fe`. seen but not understood: `f0`, `f2`, `f3`, `f4`, `f6` and as a bonus, knowing the relationship of the last two functions i'd looked at, i know the base address of this rom (finally!!): the inner multiply routine starts at `0xedf2`, so the first byte of this image is at address `0xed2f (mapped) - 0x31c3 (file) == 0xbb5c`. theory for `d2`, `d4`, `d6`, as well as `e2`, `e4`, `e6`: like their `d` counterparts but with no immediate offset. that is, `d4` is `[r5:r4] <- r0`? heres a hex region to help inform this theory:
  900d              ; jcc later
    ea15ee eb16ee   ; r4<-[0xee15]; r5<-[0xee16]
    fa01 dc01       ; r0<-[r3:r2+1]; [r5:r4+1]<-r0
    f2 d4           ; ?? ??
    b9              ; ret

later:
  ea15ee eb16ee     ; r4<-[0xee15]; r5<-[0xee16]
  fa03 dc01         ; r0<-[r3:r2+3]; [r5:r4+1]<-r0
  fa02 d4           ; r0<-[r3:r2+2]; ??
  b9                ; ret
so, this seems like a conditional branch to move 16b from one part of a struct or another, to a single destination location. `d4` probably stores the lower byte being copied, evidenced by `fa02` to load it in the later branch. then `f2` is probably a load of the lower byte, to store it in the earlier case. there is no `dc00` or `fa00` or similar.... probably because for offset-by-zero cases, there are these shorter instructions for the same outcome. this happens to make for a neat pattern as well for opcodes like `0b11x1_iNNN`: * `x` picks between "load" and "store" - this is the difference between `0xde` and `0xfe` * `i` picks between offset `0` and offset `imm8` - this is the difference between `0xd4` and `0xdc` * `NNN` picks which register pair to indirect through - `d2` uses `r3:r2`, `d4` uses `r5:r4`, `d6` uses `r7:r6` and so this opens more questions than it answers! what happens if `NNN` an odd register? can this machine indirect through a register pair like `r4:r3`? why is the pair `r1:r0` never used? what about `r7:r6`? in fact `rEven:rOdd` seems never used, are those instructions entirely different? ... [week long pause here. Destiny 2: The Final Shape launched, and everything else ground to a halt] ... ## whittling down the last few opcodes... OK. short list of remaining instructions. motivation and optimism are starting to fade.. but i want to figure out as many as possible. ### `48..4f` seems like `48..4f` has some kind of a lead here:
e878b4 e979b4 ec70ef 59 4c 74 11 e971ef 49 71 14 c977b4
which at first only looks interesting for its use of `4c`, not used much at all in this program. structuring that slightly differently makes some of the relationships a little clearer:
e878b4 e979b4       ; r0:r1 <- [0xb478:0xb479]
ec70ef 59 4c 74 11  ; r4 <- [0xef70]; ???; ???; r0 -> r4; r1 -> r0
e971ef 49 71 14     ; r1 <- [0xef71]; ???; r0 -> r1; r4 -> r0
c977b4 c876b4       ; [0xb477:0xb478] <- r0:r1
the `4c` and `49` operations clearly modify r0. `59` might modify a register or so something else; if it modifies a register, it's probably `r1` which *is* used later. it seems like r1 is the high byte of a 16b integer, so an operation directly on that byte seems a little unlikely. `59` might be a mirror of `69` (clear carry flag), setting the carry flag instead? as for `49` and `4c`, best guesses are heavily informed by what i already know: this isn't `adc`, `or`, `and`, `add`, rotate left or right, ... but given the seeming 16b value being operated on, maybe these are `sbc`. that would mean with `59` being `set cf`, this is computing something like `*0xb479 -= *0xef70 + 1`. this isn't a lot to go on for `sbc`, but double-checking a different function, it's at least coherent:
e8e8ed 9841
  e103 fe01 79 9807
    e102 fe01 79
  9022
  ea03ee eb04ee
  e058 e11b
  59 4a 72                    ; ??? ; sbc r0, r2; r0 -> r2
  11 4b 73                    ; r1 -> r0 ; sbc r0, r3; r0 -> r3
  e8deee 7a e8dfee 4b 9108    ; r0 <- [0xeede]; r0 -= r2; r0 <- [0xeedf]; sbc r0, r3; jc $+8
    bf27c5 e400 bff4dd
  e102 fe01 79 9803
    bc05c7
  28 c8e8ed bc05c7
e101 fe01
79 9008
i've marked up the most relevant lines: `59` is a leader again, and `r1` is used here, but if `59` modifies `r1` then, again, it's something that makes sense to do first and only to the upper byte of a 16bit number. `r2:r3` seem subtracted into, and with the `load; sub; load; sbc; jc` sequence this implements something like `if (r2:r3 - 0x1b58 >= [0xeede:0xeedf])` ### `59` ... or a wild guess towards `58..5f`? going to also assume that `59` is `set carry flag`, since no other `58..5f` instructions seem to be present here.. this mirrors `69` as well. ### `60..67` ... where possible `61` shows up before conditional branches, usually after loading from `0xf303`..? is that maybe a gpio address? `60` and `62` are also present .... here:
fe07 72 fe08 73 fa04 c875ed fa03 c874ed e850f1 62 9003 bceacc e852f1 60 9003 bceacc e400 bf67c5 bceacc
... is `60..67` something like "extract bit N of r0"? r0 is typically loaded before it's executed, and conditional branches are always present after. probably not consuming an `rN` and probably modifies r0 for the condition. difficult to imagine another purpose for a 3-bit field at that point. ### `ba` another region i looked at very early on has a "ba" in it at least. it's a remarkably rare opcode, it seems:
8f 8e 88
c8f0b0 88 c8efb0 88 c8eeb0 88 c8edb0 88
c8ecb0 88 c8ebb0 88 c8eab0 88 c8e9b0 88
c8e8b0 88 c8e7b0 88 c8e6b0
8d 8c 8b 8a 89 88
bae8f3 b4 c85ced e8f2b4 c85bed
b9
... is actually split up wrong, rather than `bae8f3 b4`, this is `ba e8f3b4`! matching with the `e8f2b4` to load one byte lower a few instructions later. fixed up that looks like this:
[elided restore of 0xb0e6:0xb0f0]
8d 8c 8b 8a 89 88
ba

e8f3b4 c85ced e8f2b4 c85bed
b9
so then this routine is restoring the region of bytes used for 32b x 32b multiply, all registers, then almost-but-not-ret. given the full-restore including scratch memory, this seems like the end of an interrupt routine. so `ba` is `iret`? consistent with what might be an ISR return at least. there happens to be another small routine directly after. ### `00..07` turning all the way back, this pattern gives an idea for `00..07`:
e850ef e951ef   ; r1:r0 <- [0xef51]:[0xef50]
e404            ; r4 <- 0x04
54              ; r0 += r4
9101            ; jnc $+1
  01            ; ???
80              ; push r0
f0              ; r0 <- [r1:r0]
74              ; r4 <- r0
88              ; pop r0
f801            ; r0 <- [r1:r0 + 1]
75              ; r5 <- r0
or this,
15 71 14        ; r1:r0 <- r5:r4
e304            ; r3 <- 0x04
53              ; r0 += r3
9101            ; jnc $+1
  01            ; ???
76 11 77        ; r7:r6 <- r1:r0
so here, `01` is only conditionally executed if adding produced a carry out. `r0` and `r1` seem to be operated on together, so the two might be logically a 16-bit integer. so `01` might be `inc rN`? in that case the carry out is being conditionally added into the higher byte. nothing else has seemed obviously like an `inc` yet. this seems a little odd on the whole in the first snippet, since the result of addition doesn't seem to be preserved.. `r0` is clobbered in the last load. could that whole region have been `f805 74 f806 75`? might be missing some additional behavior. other uses of `00..07` don't obviously disagree with this though. for example, `00`:
e8eeed 00 c8eeed  ; [0xedee] += 1
...
fa03 00 da03      ; [r3:r2 + 3] += 1
...
fe04 00 de04      ; [r7:r6 + 4] += 1
...
e8c0ee 00 c8c0ee  ; [0xeec0] += 1
so, maybe `00` actually is inc. ## mostly done, what's left in the encoding space? this all is some progress, not much unknown left. from the earlier list: * `00..07` - `inc rN` * `48..4f` - `sbc r0, rN` * `58..5f`, except `59` (`scf`) - might be flags manipulation? not present, either way * `60..68` - `bit r0, N` * `68..6f`, except `69` (`ccf`) - might be flags manipulation? not present, either way * `78..7f`: might be `cmp`, might be `sub`. need to find evidence one way or the other! * `a0..af`, seems not-present - `a0` is present.. once. * `b0..b7`, seems not-present * `b8..bf`, except `b9`, `ba`, `bc` (maybe jump?), `bf` * `c0..c7`, which is remarkably rare. `c0`, `c4`, `c6`? * `d0..df`, ~except `da`, `de`. seen but not understood: `db`, `dc`~ `d0..d7`, evens, are `[rN+1:rN] <- r0` `d8..df`, evens, are `[rN+1:rN + imm] <- r0` `db` is not actually present, was a misreading of the program * `f0..ff`, ~except `fa`, `fe`. seen but not understood: `f0`, `f2`, `f3`, `f4`, `f6`~ `f0..f7`, evens, are `r0 <- [rN+1:rN]` `f8..ff`, evens, are `r0 <- [rN+1:rN + imm]` `f3` is not actually present, was a misreading of the program so.. last questions: * is `78..7f` actually `sub` or `cmp`? * what is `a0`? * what are `c0..c7`? ## `78..7f` ... `sub` or `cmp`? the question really is, "does this instruction modify `r0`?" - it's possible that the instruction computes `sub`, stores the result, and the program never actually uses that result, either because substraction isn't often used or because of a compiler deficiency, something else, whatever. so the best guess here is, "is `r0` ever preserved after a `78..7f`?" or asked differently, "does `r0` get preserved/restored around a `78..7f`?" the only hint that `78..7f` might clobber `r0` comes from regions like this:
e103 fe01 79 9807               ; r1 <- 3; r0 <- [r7:r6]; sub r0, r1; jz ...
  e102 fe01 79 9022             ; r1 <- 2; r0 <- [r7:r6]; sub r0, r1; jnz ...
    ea03ee eb04ee e058 e11b ...
if `79` were `cmp` and did not modify `r0`, there wouldn't be a need to reload it in `fe01`. ... but this may be poor code, and the reload may actually be redundant. since this seems to implement `if ([r7:r6] == 3 || [r7:r6] == 2) { .. load registers }`, and there are no other signs that `78..7f` clobbers `r0`, this might actually be `cmp`. ## what is `a0`? this seems to be the only place `a0` is present:
14 71
bcabe6
bfd00e        ; call 0xed0 (???)
c8bcee        ; [0xeebc] <- r0
a0            ; ???
72 11 73      ; r3:r2 <- r1:r0
fa0b c8bfee   ; [0xeebf] <- [r3:r2 + 0x0b]
fa0a c8beee   ; [0xeebe] <- [r3:r2 + 0x0a]
e046 40       ; r0 <- 0x46; dec r0 (???)
da0a          ; [r3:r2 + 0x0a] <- r0
e0e6 9901     ; r0 <- 0xe6; jc $+01
  40          ; dec r0 (???)
da0b          ; [r3:r2 + 0x0b] <- r0
b9
whatever it is, it presumably operates on at least `r0`, writes to `r0` and `r1`. the routine at `0xed0` (outside the image?) may say more about what the registers are at its return, but from this alone it's hard to guess. it is interesting and remarkable that only `r0` is saved to `[0xeebc]`, not `r1`! ## what are `c0..c7`? seems like the most informative region to hint at these instructions:
e81ff8 61 903c
  ea29ef eb2aef   ; r5:r4 <- [0xef2a]:[0xef29]
  fa08 71 fa07    ; r1:r0 <- [r5:r4 + 8]:[r5:r4 + 7]
  c0              ; ??
  74 11 75        ; r5:r4 <- r1:r0
  12              ; r0 <- r2
  e92aef          ; r1 <- [0xef2a]
  e307 53 9101    ; r3 <- 0x07; add r0, r3; jnc $+1
    01            ; inc r1
  80 f0 72 88     ; r2 <- [r1:r0]
  f801 73         ; r3 <- [r1:r0 + 1]
  f2              ; r0 <- [r3:r2]
  e1ff 51         ; r0 += 0xff
  77              ; r7 <- r0
e600              ; r6 <- 0
9806              ;
  f4 c88cf8       ; [0xf88c] <- [r5:r4]
  c4              ; ??
  06              ; inc r6

  16 7f           ; r0 <- r6; cmp r0, r7
91f6              ; jb $-0x0a
the ending loop makes some sense: load from a 16-bit pointer, store to maybe-IO-register(?), increment `r6`, repeat until `r6 == r7`. in other contexts where `c0` is used, `r1:r0` is recently populated with a 16-bit integer too. so it seems likely that `c[0-7]` operates on at least `rN`, maybe `rN+1` if it's more like the `d_` or `f_` two-registers-as-an-address instructions. if `c4` were a load or store it would probably operate with respect to `r0` and `r4`, but `r0` is immediately clobbered, so it's probably not a load or otherwise leaving a result in `r0`. if it were a store this might overwrite a buffer.. somewhere.. with `0, 1, 2, 3, 4, .. `. looking at the `c0` earlier in this block `r1:r0` is loaded immediately before, and then read (copied to `r5:r4`) immediately after. `r5:r4` is used for the `f4` load, so those registers form something like a pointer. compare with the other use of `c4` in this program here: e4e3 e5ed ; r4 <- 0xe3; r5 <- 0xed e28f e301 ; r2 <- 0x8f; r3 <- 0x01 28 ; xor r0, r0 loop: 42 9903 ; dec r2; jnc body 43 9105 ; dec r3; jc exit body: d4 ; [r5:r4] <- r0 c4 ; ??? bc69bb ; jmp loop exit: bc26be ; jmp ... somewhere ... `r5:r4` is written through, but the combined `dec r2; jnc body; dec r3; jc exit; ... jmp loop` forms a a loop that repeats until `r3:r2` is decremented past zero. the loop body is simply `[r5:r4] <- r0`, `r0` set to zero, `c4` probably operates on `r5:r4`, and if it modifies `r0` then `r0` is left in that modified state for the next store through `[r5:r4]`. looking at other 8-bit processors for inspiration regarding `c[0246]`, it seems plausible that it is in fact an increment for a register pair. in that case, the loop forms a memset, clearing `0x1c0` bytes of memory. this is also almost at the start of the image - not knowing where execution begins, it still seems likely enough that this is related to initialization. there might not be a corresponding 16-bit decrement instruction? or if there is, like the 8080, it might not set flags, and so would not be useful to decrement `r3:r2` in this loop. looking back at the other loop earlier:
e600              ; r6 <- 0
9806              ;
  f4 c88cf8       ; [0xf88c] <- [r5:r4]
  c4              ; inc r5:r4
  06              ; inc r6

  16 7f           ; r0 <- r6; cmp r0, r7
91f6              ; jc $-0x0a
then taking `c4` to be `inc r5:r4` makes this a loop writing the bytes from a buffer `r7` bytes long at `r5:r4` into the address `f88c`. why not decrement `r7` instead of the inc/mov/compare?? ## but wait! what happened with `jcc`? in writing this up i flip-flopped on the meaning of `91` and `99` jumps without entirely realizing it. two different regions of code suggest different semantics! first, the inner multiply loop from earlier:
  e408                  ; r4 <- 8
back:
    69 3d               ; ccf; rcr r5
    911d                ; jcc.lo.1 forward
back:

      e8eab0 56 c8eab0  ; add [0xb0ea], r6
      e8ebb0 09 c8ebb0  ; add [0xb0eb], r1
      e8ecb0 0a c8ecb0  ; add [0xb0eb], r2
      e8edb0 0b c8edb0  ; add [0xb0eb], r3

      69                ; ccf
forward:
    36 31 32 33 44    ; ccf; rcl r6:r1:r2:r3; dec r4
  90d8                ; jnz back
  b9                  ; ret
where `91` seems like `jnc` - "jump past adding in the multiplier if the next bit in the multiplicand was 0". but a different loop suggests the opposite reading:
  e4e3 e5ed   ; r4 <- 0xe3; r5 <- 0xed
  e28f e301   ; r2 <- 0x8f; r3 <- 0x01
  28          ; xor r0, r0
loop:
  42 9903     ; dec r2; jnc body
  43 9105     ; dec r3; jc exit
body:
  d4          ; [r5:r4] <- r0
  c4          ; ???
  bc69bb      ; jmp loop
exit:
  bc26be      ; jmp ... somewhere ...
where instead it's `99` that looks like a `jnc` - "if decrementing r2 did not borrow, do not decrement r3 and continue another loop iteration". and `91` is what looks like a `jc`- "if decrementing r3 borrowed, skip past the loop body". either "jc" and "jnc" are conditional on more than it first seems, or perhaps more likely, `dec` produces a carry bit any time the result is not zero. as an example: | r0 | r0-after-dec | carry | |-------|--------------|-------| | 0x00 | ff + 0 = ff | 0 | | 0x01 | ff + 1 = 00 | 1 | | 0x02 | ff + 2 = 01 | 1 | | 0xff | ff + ff = fe | 1 | that would bring this all back together: `99` is `jc`, `91` is `jnc`. it's rare that there's a `dec; jcc` (one other instance in this program at `0x16db`), so it's hard to cross-check this interpretation. ## last thoughts in looking at this i was very surprised by how informative loops - especially short loops - are for finding bounds of what a program may or likely does not do. this isn't very surprising in retrospect; short programs don't have opportunities to do very much, and doing the same not-very-much in a loop has even fewer opportunities to do something useful. _and_ loops are usually conditioned on a relatively simple predicate: `while x < 10 do { ... }`, or `do { ... } while x > 10`, or `while x != 0 { x = loop_body() }`. a _lot_ of behavior fell out of finding short loops and making sense of the instructions used to drive them. this definitely applies when you *do* know the instruction set but are trying to make sense of a larger program - it's just good advice when reverse engineering a program. it's neat to see the idea carry through when you're figuring out the instruction set itself. additionally: this is doable! what's totally unknown at this point is mostly instructions that don't appear in this program (at which point it's hard to guess about behavior...) ## conclusion that seems to be the ISA, at least as used in this program. this architecture seems like an outsider art re-envisioning of the 8080, with fewer register to register movs, and more indexed memory accesses. it seems interesting that this architecture has loads like `[r7:r6]` and `[r7:r6 + N]` but not `[r7:r6 + rN]`. having non-offset load/store through a register pair seems a bit out of place in its own right: it's a lot of encoding space to reserve for a relatively rare operation. maybe it's more common in some reference program, and this firmware is the odd one? `a0..af` are almost nonexistent here, and might be other 8080-style instructions. `b0..b8` are not represented in this program, and would be prime encoding space for conditional returns. it wouldn't be terribly shocking if a compiler didn't know to use conditional returns and instead conditionally branched over returns. the moment _i_, at least, have been waiting for, after describing as much of the ISA as possible, is to compare notes with others who have looked at this CPU or programs for it: * whitequark's binja plugin: [https://github.com/whitequark/binja-avnera](https://github.com/whitequark/binja-avnera) * several years ago: [https://github.com/Prehistoricman/AV7300](https://github.com/Prehistoricman/AV7300) ... we almost entirely agree! it seems that Prehistoricman tested with a physical CPU, and has some notes for opcodes that are otherwise not present: [https://github.com/Prehistoricman/AV7300/blob/master/Instruction%20set%20notes.txt#L195-L198](https://github.com/Prehistoricman/AV7300/blob/master/Instruction%20set%20notes.txt#L195-L198) whitequark records `58..5f` and `68..6f` as `set` and `clr` respectively, which i suspect are the same as i'd understood: set (or clear) bit in status register. this is also what Prehistoricman understood them to mean. i'm pretty surprised how much can be reasonably guessed out from just a 12kb firmware! there are plenty of operational semantics missing in my descriptions above - for example, i know basically nothing about memory addressing: lots of the above leaned on assuming a flat 64kb address space is a decnt approximation. segmentation would be annoying to figure out! if the ISA were anything more complex it probably would have required more than just staring really hard at notes. an ARM-style encoding with more aggressive packing of bits certainly would have been harder to discover. if you happen to want to disassemble programs for Avnera processors - it's not at all clear to me which models may have different or extended instruction sets - i've published a disassembler based on the above notes as [yaxpeax-avnera](link). from whitequark's note [here](https://github.com/whitequark/binja-avnera/tree/main?tab=readme-ov-file#devices) it does seem likely this instruction set is common across many models! ### summarized materials there are a few more programs reportedly for this architecture here, from Prehistoricman: [link 1, sha256] [link 2, sha256] the program i reference heavily in this post is here: [link 3, sha256] * [noes](./noes) [mirror] whitequark's excellent cheatsheet of the encoding space: * https://github.com/whitequark/binja-avnera/tree/main?tab=readme-ov-file#cheatsheet this last one i find interesting as history for what i guessed right, wrong, and revisited how early on - my notes as i touched up and revisited `noes` with increasingly-better understanding: * [yax/avnera/disasm/](./disasm/)