use core::fmt; /// `DisplaySink` allows client code to collect output and minimal markup. this is currently used /// in formatting instructions for two reasons: /// * `DisplaySink` implementations have the opportunity to collect starts and ends of tokens at /// the same time as collecting output itself. /// * `DisplaySink` implementations provide specialized functions for writing strings in /// circumstances where a simple "use `core::fmt`" might incur unwanted overhead. /// /// ## spans /// /// spans are out-of-band indicators for the meaning of data written to this sink. when a /// `span_start_` function is called, data written until a matching `span_end_` can be /// considered the text corresponding to ``. /// /// spans are entered and exited in a FILO manner. implementations of `DisplaySink` are explicitly /// allowed to depend on this fact. functions writing to a `DisplaySink` must exit spans in reverse /// order to when they are entered. a function that has a call sequence like /// ```text /// sink.span_start_operand(); /// sink.span_start_immediate(); /// sink.span_end_operand(); /// ``` /// is in error. /// /// spans are reported through the `span_start_*` and `span_end_*` families of functions to avoid /// constraining implementations into tracking current output offset (which may not be knowable) or /// span size (which may be knowable, but incur additional overhead to compute or track). if the /// task for a span is to simply emit VT100 color codes, for example, implementations avoid the /// overhead of tracking offsets. /// /// default implementations of the `span_start_*` and `span_end_*` functions are to do nothing. a /// no-op `span_start_*` or `span_end_*` allows rustc to elimiate such calls at compile time for /// `DisplaySink` that are uninterested in the corresponding span type. /// /// # write helpers (`write_*`) /// /// the `write_*` helpers on `DisplaySink` may be able to take advantage of contraints described in /// documentation here to better support writing some kinds of inputs than a fully-general solution /// (such as `core::fmt`) might be able to yield. /// /// currently there are two motivating factors for `write_*` helpers: /// /// instruction formatting often involves writing small but variable-size strings, such as register /// names, which is something of a pathological case for string appending as Rust currently exists: /// this often becomes `memcpy` and specifically a call to the platform's `memcpy` (rather than an /// inlined `rep movsb`) just to move 3-5 bytes. one relevant Rust issue for reference: /// /// /// there are similar papercuts around formatting integers as base-16 numbers, such as /// . in isolation and in most applications these are /// not a significant source of overhead. but for programs bounded on decoding and printing /// instructions, these can add up to significant overhead - on the order of 10-20% of total /// runtime. /// /// ## example /// /// a simple call sequence to `DisplaySink` might look something like: /// ```compile_fail /// sink.span_start_operand() /// sink.write_char('[') /// sink.span_start_register() /// sink.write_fixed_size("rbp") /// sink.span_end_register() /// sink.write_char(']') /// sink.span_end_operand() /// ``` /// which writes the text `[rbp]`, telling sinks that the operand begins at `[`, ends after `]`, /// and `rbp` is a register in that operand. /// /// ## extensibility /// /// additional `span_{start,end}_*` helpers may be added over time - in the above example, one /// future addition might be to add a new `effective_address` span that is started before /// `register` and ended after `register. for an operand like `\[rbp\]` the effective address span /// would exactly match a corresponding register span, but in more complicated scenarios like /// `[rsp + rdi * 4 + 0x50]` the effective address would be all of `rsp + rdi * 4 + 0x50`. /// /// additional spans are expected to be added as needed. it is not immediately clear how to add /// support for more architecture-specific concepts (such as itanium predicate registers) would be /// supported yet, and so architecture-specific concepts may be expressed on `DisplaySink` if the /// need arises. /// /// new `span_{start,end}_*` helpers will be defaulted as no-op. additions to this trait will be /// minor version bumps, so users should take care to not add custom functions starting with /// `span_start_` or `span_end_` to structs implementing `DisplaySink`. pub trait DisplaySink: fmt::Write { #[inline(always)] fn write_fixed_size(&mut self, s: &str) -> Result<(), core::fmt::Error> { self.write_str(s) } /// write a string to this sink that is less than 32 bytes. this is provided for optimization /// opportunities when writing a variable-length string with known max size. /// /// SAFETY: the provided `s` must be less than 32 bytes. if the provided string is longer than /// 31 bytes, implementations may only copy part of a multi-byte codepoint while writing to a /// utf-8 string. this may corrupt Rust strings. unsafe fn write_lt_32(&mut self, s: &str) -> Result<(), core::fmt::Error> { self.write_str(s) } /// write a string to this sink that is less than 16 bytes. this is provided for optimization /// opportunities when writing a variable-length string with known max size. /// /// SAFETY: the provided `s` must be less than 16 bytes. if the provided string is longer than /// 15 bytes, implementations may only copy part of a multi-byte codepoint while writing to a /// utf-8 string. this may corrupt Rust strings. unsafe fn write_lt_16(&mut self, s: &str) -> Result<(), core::fmt::Error> { self.write_str(s) } /// write a string to this sink that is less than 8 bytes. this is provided for optimization /// opportunities when writing a variable-length string with known max size. /// /// SAFETY: the provided `s` must be less than 8 bytes. if the provided string is longer than /// 7 bytes, implementations may only copy part of a multi-byte codepoint while writing to a /// utf-8 string. this may corrupt Rust strings. unsafe fn write_lt_8(&mut self, s: &str) -> Result<(), core::fmt::Error> { self.write_str(s) } /// write a u8 to the output as a base-16 integer. /// /// this corresponds to the Rust format specifier `{:x}` - see [`std::fmt::LowerHex`] for more. /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) fn write_u8(&mut self, v: u8) -> Result<(), core::fmt::Error> { write!(self, "{:x}", v) } /// write a u8 to the output as a base-16 integer with leading `0x`. /// /// this corresponds to the Rust format specifier `{#:x}` - see [`std::fmt::LowerHex`] for more. /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) fn write_prefixed_u8(&mut self, v: u8) -> Result<(), core::fmt::Error> { self.write_fixed_size("0x")?; self.write_u8(v) } /// write an i8 to the output as a base-16 integer with leading `0x`, and leading `-` if the /// value is negative. /// /// there is no matching `std` formatter, so some examples here: /// ```text /// sink.write_prefixed_i8(-0x60); // writes `-0x60` to the sink /// sink.write_prefixed_i8(127); // writes `0x7f` to the sink /// sink.write_prefixed_i8(-128); // writes `-0x80` to the sink /// ``` /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) fn write_prefixed_i8(&mut self, v: i8) -> Result<(), core::fmt::Error> { let v = if v < 0 { self.write_char('-')?; v.unsigned_abs() } else { v as u8 }; self.write_prefixed_u8(v) } /// write a u16 to the output as a base-16 integer. /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) fn write_u16(&mut self, v: u16) -> Result<(), core::fmt::Error> { write!(self, "{:x}", v) } /// write a u16 to the output as a base-16 integer with leading `0x`. /// /// this corresponds to the Rust format specifier `{#:x}` - see [`std::fmt::LowerHex`] for more. /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) fn write_prefixed_u16(&mut self, v: u16) -> Result<(), core::fmt::Error> { self.write_fixed_size("0x")?; self.write_u16(v) } /// write an i16 to the output as a base-16 integer with leading `0x`, and leading `-` if the /// value is negative. /// /// there is no matching `std` formatter, so some examples here: /// ```text /// sink.write_prefixed_i16(-0x60); // writes `-0x60` to the sink /// sink.write_prefixed_i16(127); // writes `0x7f` to the sink /// sink.write_prefixed_i16(-128); // writes `-0x80` to the sink /// ``` /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) fn write_prefixed_i16(&mut self, v: i16) -> Result<(), core::fmt::Error> { let v = if v < 0 { self.write_char('-')?; v.unsigned_abs() } else { v as u16 }; self.write_prefixed_u16(v) } /// write a u32 to the output as a base-16 integer. /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) fn write_u32(&mut self, v: u32) -> Result<(), core::fmt::Error> { write!(self, "{:x}", v) } /// write a u32 to the output as a base-16 integer with leading `0x`. /// /// this corresponds to the Rust format specifier `{#:x}` - see [`std::fmt::LowerHex`] for more. /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) fn write_prefixed_u32(&mut self, v: u32) -> Result<(), core::fmt::Error> { self.write_fixed_size("0x")?; self.write_u32(v) } /// write an i32 to the output as a base-32 integer with leading `0x`, and leading `-` if the /// value is negative. /// /// there is no matching `std` formatter, so some examples here: /// ```text /// sink.write_prefixed_i32(-0x60); // writes `-0x60` to the sink /// sink.write_prefixed_i32(127); // writes `0x7f` to the sink /// sink.write_prefixed_i32(-128); // writes `-0x80` to the sink /// ``` /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) fn write_prefixed_i32(&mut self, v: i32) -> Result<(), core::fmt::Error> { let v = if v < 0 { self.write_char('-')?; v.unsigned_abs() } else { v as u32 }; self.write_prefixed_u32(v) } /// write a u64 to the output as a base-16 integer. /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) fn write_u64(&mut self, v: u64) -> Result<(), core::fmt::Error> { write!(self, "{:x}", v) } /// write a u64 to the output as a base-16 integer with leading `0x`. /// /// this corresponds to the Rust format specifier `{#:x}` - see [`std::fmt::LowerHex`] for more. /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) fn write_prefixed_u64(&mut self, v: u64) -> Result<(), core::fmt::Error> { self.write_fixed_size("0x")?; self.write_u64(v) } /// write an i64 to the output as a base-64 integer with leading `0x`, and leading `-` if the /// value is negative. /// /// there is no matching `std` formatter, so some examples here: /// ```text /// sink.write_prefixed_i64(-0x60); // writes `-0x60` to the sink /// sink.write_prefixed_i64(127); // writes `0x7f` to the sink /// sink.write_prefixed_i64(-128); // writes `-0x80` to the sink /// ``` /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) fn write_prefixed_i64(&mut self, v: i64) -> Result<(), core::fmt::Error> { let v = if v < 0 { self.write_char('-')?; v.unsigned_abs() } else { v as u64 }; self.write_prefixed_u64(v) } /// enter a region inside which output corresponds to an immediate. fn span_start_immediate(&mut self) { } /// end a region where an immediate was written. see docs on [`DisplaySink`] for more. fn span_end_immediate(&mut self) { } /// enter a region inside which output corresponds to a register. fn span_start_register(&mut self) { } /// end a region where a register was written. see docs on [`DisplaySink`] for more. fn span_end_register(&mut self) { } /// enter a region inside which output corresponds to an opcode. fn span_start_opcode(&mut self) { } /// end a region where an opcode was written. see docs on [`DisplaySink`] for more. fn span_end_opcode(&mut self) { } /// enter a region inside which output corresponds to the program counter. fn span_start_program_counter(&mut self) { } /// end a region where the program counter was written. see docs on [`DisplaySink`] for more. fn span_end_program_counter(&mut self) { } /// enter a region inside which output corresponds to a number, such as a memory offset or /// immediate. fn span_start_number(&mut self) { } /// end a region where a number was written. see docs on [`DisplaySink`] for more. fn span_end_number(&mut self) { } /// enter a region inside which output corresponds to an address. this is a best guess; /// instructions like x86's `lea` may involve an "address" that is not, and arithmetic /// instructions may operate on addresses held in registers. /// /// where possible, the presence of this span will be informed by ISA semantics - if an /// instruction has a memory operand, the effective address calculation of that operand should /// be in an address span. fn span_start_address(&mut self) { } /// end a region where an address was written. the specifics of an "address" are ambiguous and /// best-effort; see [`DisplaySink::span_start_address`] for more about this. otherwise, see /// docs on [`DisplaySink`] for more about spans. fn span_end_address(&mut self) { } /// enter a region inside which output corresponds to a function address, or expression /// evaluating to a function address. this is a best guess; instructions like `call` may call /// to a non-function address, `jmp` may jump to a function (as with tail calls), function /// addresses may be computed via table lookup without semantic hints. /// /// where possible, the presence of this span will be informed by ISA semantics - if an /// instruction is like a "call", an address operand should be a `function` span. if other /// instructions can be expected to handle subroutine starting addresses purely from ISA /// semantics, address operand(s) should be in a `function` span. fn span_start_function_expr(&mut self) { } /// end a region where function address expression was written. the specifics of a "function /// address" are ambiguous and best-effort; see [`DisplaySink::span_start_function_expr`] for more /// about this. otherwise, see docs on [`DisplaySink`] for more about spans. fn span_end_function_expr(&mut self) { } } /// `FmtSink` can be used to adapt any `fmt::Write`-implementing type into a `DisplaySink` to /// format an instruction while discarding all span information at zero cost. pub struct FmtSink<'a, T: fmt::Write> { out: &'a mut T, } impl<'a, T: fmt::Write> FmtSink<'a, T> { pub fn new(f: &'a mut T) -> Self { Self { out: f } } } /// blanket impl that discards all span information, forwards writes to the underlying `fmt::Write` /// type. impl<'a, T: fmt::Write> DisplaySink for FmtSink<'a, T> { } impl<'a, T: fmt::Write> fmt::Write for FmtSink<'a, T> { fn write_str(&mut self, s: &str) -> Result<(), core::fmt::Error> { self.out.write_str(s) } fn write_char(&mut self, c: char) -> Result<(), core::fmt::Error> { self.out.write_char(c) } fn write_fmt(&mut self, f: fmt::Arguments) -> Result<(), core::fmt::Error> { self.out.write_fmt(f) } } #[cfg(feature = "alloc")] mod instruction_text_sink { use core::fmt; use super::{DisplaySink, u8_to_hex}; use crate::safer_unchecked::unreachable_kinda_unchecked; /// this is an implementation detail of yaxpeax-arch and related crates. if you are a user of the /// disassemblers, do not use this struct. do not depend on this struct existing. this struct is /// not stable. this struct is not safe for general use. if you use this struct you and your /// program will be eaten by gremlins. /// /// if you are implementing an instruction formatter for the yaxpeax family of crates: this struct /// is guaranteed to contain a string that is long enough to hold a fully-formatted instruction. /// because the buffer is guaranteed to be long enough, writes through `InstructionTextSink` are /// not bounds-checked, and the buffer is never grown. /// /// this is wildly dangerous in general use. the public constructor of `InstructionTextSink` is /// unsafe as a result. as used in `InstructionFormatter`, the buffer is guaranteed to be /// `clear()`ed before use, `InstructionFormatter` ensures the buffer is large enough, *and* /// `InstructionFormatter` never allows `InstructionTextSink` to exist in a context where it would /// be written to without being rewound first. /// /// because this opens a very large hole through which `fmt::Write` can become unsafe, incorrect /// uses of this struct will be hard to debug in general. `InstructionFormatter` is probably at the /// limit of easily-reasoned-about lifecycle of the buffer, which "only" leaves the problem of /// ensuring that instruction formatting impls this buffer is passed to are appropriately sized. /// /// this is intended to be hidden in docs. if you see this in docs, it's a bug. #[doc(hidden)] pub struct InstructionTextSink<'buf> { buf: &'buf mut alloc::string::String } impl<'buf> InstructionTextSink<'buf> { // TODO: safety pub unsafe fn new(buf: &'buf mut alloc::string::String) -> Self { Self { buf } } } impl<'buf> fmt::Write for InstructionTextSink<'buf> { fn write_str(&mut self, s: &str) -> Result<(), core::fmt::Error> { self.buf.write_str(s) } fn write_char(&mut self, c: char) -> Result<(), core::fmt::Error> { if cfg!(debug_assertions) { if self.buf.capacity() < self.buf.len() + 1 { panic!("InstructionTextSink::write_char would overflow output"); } } // SAFETY: `buf` is assumed to be long enough to hold all input, `buf` at `underlying.len()` // is valid for writing, but may be uninitialized. // // this function is essentially equivalent to `Vec::push` specialized for the case that // `len < buf.capacity()`: // https://github.com/rust-lang/rust/blob/be9e27e/library/alloc/src/vec/mod.rs#L1993-L2006 unsafe { let underlying = self.buf.as_mut_vec(); // `InstructionTextSink::write_char` is only used by yaxpeax-x86, and is only used to // write single ASCII characters. this is wrong in the general case, but `write_char` // here is not going to be used in the general case. if cfg!(debug_asertions) { panic!("InstructionTextSink::write_char would truncate output"); } let to_push = c as u8; // `ptr::write` here because `underlying.add(underlying.len())` may not point to an // initialized value, which would mean that turning that pointer into a `&mut u8` to // store through would be UB. `ptr::write` avoids taking the mut ref. underlying.as_mut_ptr().offset(underlying.len() as isize).write(to_push); // we have initialized all (one) bytes that `set_len` is increasing the length to // include. underlying.set_len(underlying.len() + 1); } Ok(()) } } impl<'buf> DisplaySink for InstructionTextSink<'buf> { #[inline(always)] fn write_fixed_size(&mut self, s: &str) -> Result<(), core::fmt::Error> { if cfg!(debug_assertions) { if self.buf.capacity() < self.buf.len() + s.len() { panic!("InstructionTextSink::write_fixed_size would overflow output"); } } let buf = unsafe { self.buf.as_mut_vec() }; let new_bytes = s.as_bytes(); if new_bytes.len() == 0 { return Ok(()); } if new_bytes.len() >= 16 { unsafe { unreachable_kinda_unchecked() } } unsafe { let dest = buf.as_mut_ptr().offset(buf.len() as isize); // this used to be enough to bamboozle llvm away from // https://github.com/rust-lang/rust/issues/92993#issuecomment-2028915232https://github.com/rust-lang/rust/issues/92993#issuecomment-2028915232 // if `s` is not fixed size. somewhere between Rust 1.68 and Rust 1.74 this stopped // being sufficient, so `write_fixed_size` truly should only be used for fixed size `s` // (otherwise this is a libc memcpy call in disguise). for fixed-size strings this // unrolls into some kind of appropriate series of `mov`. dest.offset(0 as isize).write(new_bytes[0]); for i in 1..new_bytes.len() { dest.offset(i as isize).write(new_bytes[i]); } buf.set_len(buf.len() + new_bytes.len()); } Ok(()) } unsafe fn write_lt_32(&mut self, s: &str) -> Result<(), fmt::Error> { if cfg!(debug_assertions) { if self.buf.capacity() < self.buf.len() + s.len() { panic!("InstructionTextSink::write_lt_32 would overflow output"); } } unsafe { crate::display::display_sink::append_string_lt_32_unchecked(&mut self.buf, s); } Ok(()) } unsafe fn write_lt_16(&mut self, s: &str) -> Result<(), fmt::Error> { if cfg!(debug_assertions) { if self.buf.capacity() < self.buf.len() + s.len() { panic!("InstructionTextSink::write_lt_16 would overflow output"); } } unsafe { crate::display::display_sink::append_string_lt_16_unchecked(&mut self.buf, s); } Ok(()) } unsafe fn write_lt_8(&mut self, s: &str) -> Result<(), fmt::Error> { if cfg!(debug_assertions) { if self.buf.capacity() < self.buf.len() + s.len() { panic!("InstructionTextSink::write_lt_8 would overflow output"); } } unsafe { crate::display::display_sink::append_string_lt_8_unchecked(&mut self.buf, s); } Ok(()) } /// write a u8 to the output as a base-16 integer. /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) #[inline(always)] fn write_u8(&mut self, mut v: u8) -> Result<(), core::fmt::Error> { if v == 0 { return self.write_fixed_size("0"); } // we can fairly easily predict the size of a formatted string here with lzcnt, which also // means we can write directly into the correct offsets of the output string. let printed_size = ((8 - v.leading_zeros() + 3) >> 2) as usize; if cfg!(debug_assertions) { if self.buf.capacity() < self.buf.len() + printed_size { panic!("InstructionTextSink::write_u8 would overflow output"); } } let buf = unsafe { self.buf.as_mut_vec() }; let new_len = buf.len() + printed_size; unsafe { buf.set_len(new_len); } let mut p = unsafe { buf.as_mut_ptr().offset(new_len as isize) }; loop { let digit = v % 16; let c = u8_to_hex(digit as u8); unsafe { p = p.offset(-1); p.write(c); } v = v / 16; if v == 0 { break; } } Ok(()) } /// write a u16 to the output as a base-16 integer. /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) #[inline(always)] fn write_u16(&mut self, mut v: u16) -> Result<(), core::fmt::Error> { if v == 0 { return self.write_fixed_size("0"); } // we can fairly easily predict the size of a formatted string here with lzcnt, which also // means we can write directly into the correct offsets of the output string. let printed_size = ((16 - v.leading_zeros() + 3) >> 2) as usize; if cfg!(debug_assertions) { if self.buf.capacity() < self.buf.len() + printed_size { panic!("InstructionTextSink::write_u16 would overflow output"); } } let buf = unsafe { self.buf.as_mut_vec() }; let new_len = buf.len() + printed_size; unsafe { buf.set_len(new_len); } let mut p = unsafe { buf.as_mut_ptr().offset(new_len as isize) }; loop { let digit = v % 16; let c = u8_to_hex(digit as u8); unsafe { p = p.offset(-1); p.write(c); } v = v / 16; if v == 0 { break; } } Ok(()) } /// write a u32 to the output as a base-16 integer. /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) #[inline(always)] fn write_u32(&mut self, mut v: u32) -> Result<(), core::fmt::Error> { if v == 0 { return self.write_fixed_size("0"); } // we can fairly easily predict the size of a formatted string here with lzcnt, which also // means we can write directly into the correct offsets of the output string. let printed_size = ((32 - v.leading_zeros() + 3) >> 2) as usize; if cfg!(debug_assertions) { if self.buf.capacity() < self.buf.len() + printed_size { panic!("InstructionTextSink::write_u32 would overflow output"); } } let buf = unsafe { self.buf.as_mut_vec() }; let new_len = buf.len() + printed_size; unsafe { buf.set_len(new_len); } let mut p = unsafe { buf.as_mut_ptr().offset(new_len as isize) }; loop { let digit = v % 16; let c = u8_to_hex(digit as u8); unsafe { p = p.offset(-1); p.write(c); } v = v / 16; if v == 0 { break; } } Ok(()) } /// write a u64 to the output as a base-16 integer. /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) #[inline(always)] fn write_u64(&mut self, mut v: u64) -> Result<(), core::fmt::Error> { if v == 0 { return self.write_fixed_size("0"); } // we can fairly easily predict the size of a formatted string here with lzcnt, which also // means we can write directly into the correct offsets of the output string. let printed_size = ((64 - v.leading_zeros() + 3) >> 2) as usize; if cfg!(debug_assertions) { if self.buf.capacity() < self.buf.len() + printed_size { panic!("InstructionTextSink::write_u64 would overflow output"); } } let buf = unsafe { self.buf.as_mut_vec() }; let new_len = buf.len() + printed_size; unsafe { buf.set_len(new_len); } let mut p = unsafe { buf.as_mut_ptr().offset(new_len as isize) }; loop { let digit = v % 16; let c = u8_to_hex(digit as u8); unsafe { p = p.offset(-1); p.write(c); } v = v / 16; if v == 0 { break; } } Ok(()) } } } #[cfg(feature = "alloc")] pub use instruction_text_sink::InstructionTextSink; #[cfg(feature = "alloc")] use crate::display::u8_to_hex; #[cfg(feature = "alloc")] use crate::safer_unchecked::unreachable_kinda_unchecked; /// this [`DisplaySink`] impl exists to support somewhat more performant buffering of the kinds of /// strings `yaxpeax-x86` uses in formatting instructions. /// /// span information is discarded at zero cost. #[cfg(feature = "alloc")] impl DisplaySink for alloc::string::String { #[inline(always)] fn write_fixed_size(&mut self, s: &str) -> Result<(), core::fmt::Error> { self.reserve(s.len()); let buf = unsafe { self.as_mut_vec() }; let new_bytes = s.as_bytes(); if new_bytes.len() == 0 { unsafe { unreachable_kinda_unchecked() } } if new_bytes.len() >= 16 { unsafe { unreachable_kinda_unchecked() } } unsafe { let dest = buf.as_mut_ptr().offset(buf.len() as isize); // this used to be enough to bamboozle llvm away from // https://github.com/rust-lang/rust/issues/92993#issuecomment-2028915232 // if `s` is not fixed size. somewhere between Rust 1.68 and Rust 1.74 this stopped // being sufficient, so `write_fixed_size` truly should only be used for fixed size `s` // (otherwise this is a libc memcpy call in disguise). for fixed-size strings this // unrolls into some kind of appropriate series of `mov`. dest.offset(0 as isize).write(new_bytes[0]); for i in 1..new_bytes.len() { dest.offset(i as isize).write(new_bytes[i]); } buf.set_len(buf.len() + new_bytes.len()); } Ok(()) } unsafe fn write_lt_32(&mut self, s: &str) -> Result<(), fmt::Error> { self.reserve(s.len()); unsafe { append_string_lt_32_unchecked(self, s); } Ok(()) } unsafe fn write_lt_16(&mut self, s: &str) -> Result<(), fmt::Error> { self.reserve(s.len()); unsafe { append_string_lt_16_unchecked(self, s); } Ok(()) } unsafe fn write_lt_8(&mut self, s: &str) -> Result<(), fmt::Error> { self.reserve(s.len()); unsafe { append_string_lt_8_unchecked(self, s); } Ok(()) } /// write a u8 to the output as a base-16 integer. /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) #[inline(always)] fn write_u8(&mut self, mut v: u8) -> Result<(), core::fmt::Error> { if v == 0 { return self.write_fixed_size("0"); } // we can fairly easily predict the size of a formatted string here with lzcnt, which also // means we can write directly into the correct offsets of the output string. let printed_size = ((8 - v.leading_zeros() + 3) >> 2) as usize; self.reserve(printed_size); let buf = unsafe { self.as_mut_vec() }; let new_len = buf.len() + printed_size; unsafe { buf.set_len(new_len); } let mut p = unsafe { buf.as_mut_ptr().offset(new_len as isize) }; loop { let digit = v % 16; let c = u8_to_hex(digit as u8); unsafe { p = p.offset(-1); p.write(c); } v = v / 16; if v == 0 { break; } } Ok(()) } /// write a u16 to the output as a base-16 integer. /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) #[inline(always)] fn write_u16(&mut self, mut v: u16) -> Result<(), core::fmt::Error> { if v == 0 { return self.write_fixed_size("0"); } // we can fairly easily predict the size of a formatted string here with lzcnt, which also // means we can write directly into the correct offsets of the output string. let printed_size = ((16 - v.leading_zeros() + 3) >> 2) as usize; self.reserve(printed_size); let buf = unsafe { self.as_mut_vec() }; let new_len = buf.len() + printed_size; unsafe { buf.set_len(new_len); } let mut p = unsafe { buf.as_mut_ptr().offset(new_len as isize) }; loop { let digit = v % 16; let c = u8_to_hex(digit as u8); unsafe { p = p.offset(-1); p.write(c); } v = v / 16; if v == 0 { break; } } Ok(()) } /// write a u32 to the output as a base-16 integer. /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) #[inline(always)] fn write_u32(&mut self, mut v: u32) -> Result<(), core::fmt::Error> { if v == 0 { return self.write_fixed_size("0"); } // we can fairly easily predict the size of a formatted string here with lzcnt, which also // means we can write directly into the correct offsets of the output string. let printed_size = ((32 - v.leading_zeros() + 3) >> 2) as usize; self.reserve(printed_size); let buf = unsafe { self.as_mut_vec() }; let new_len = buf.len() + printed_size; unsafe { buf.set_len(new_len); } let mut p = unsafe { buf.as_mut_ptr().offset(new_len as isize) }; loop { let digit = v % 16; let c = u8_to_hex(digit as u8); unsafe { p = p.offset(-1); p.write(c); } v = v / 16; if v == 0 { break; } } Ok(()) } /// write a u64 to the output as a base-16 integer. /// /// this is provided for optimization opportunities when the formatted integer can be written /// directly to the sink (rather than formatted to an intermediate buffer and output as a /// followup step) #[inline(always)] fn write_u64(&mut self, mut v: u64) -> Result<(), core::fmt::Error> { if v == 0 { return self.write_fixed_size("0"); } // we can fairly easily predict the size of a formatted string here with lzcnt, which also // means we can write directly into the correct offsets of the output string. let printed_size = ((64 - v.leading_zeros() + 3) >> 2) as usize; self.reserve(printed_size); let buf = unsafe { self.as_mut_vec() }; let new_len = buf.len() + printed_size; unsafe { buf.set_len(new_len); } let mut p = unsafe { buf.as_mut_ptr().offset(new_len as isize) }; loop { let digit = v % 16; let c = u8_to_hex(digit as u8); unsafe { p = p.offset(-1); p.write(c); } v = v / 16; if v == 0 { break; } } Ok(()) } } /// append `data` to `buf`, assuming `data` is less than 8 bytes and that `buf` has enough space /// remaining to hold all bytes in `data`. /// /// Safety: callers must ensure that `buf.capacity() - buf.len() >= data.len()`. #[inline(always)] unsafe fn append_string_lt_8_unchecked(buf: &mut alloc::string::String, data: &str) { // SAFETY: todo let buf = unsafe { buf.as_mut_vec() }; let new_bytes = data.as_bytes(); // should get DCE if new_bytes.len() >= 8 { unsafe { core::hint::unreachable_unchecked() } } unsafe { let dest = buf.as_mut_ptr().offset(buf.len() as isize); let src = new_bytes.as_ptr(); let rem = new_bytes.len() as isize; // set_len early because there is no way to avoid the following asm!() writing that // same number of bytes into buf buf.set_len(buf.len() + new_bytes.len()); core::arch::asm!( "8:", "cmp {rem:e}, 4", "jb 9f", "mov {buf:e}, dword ptr [{src} + {rem} - 4]", "mov dword ptr [{dest} + {rem} - 4], {buf:e}", "sub {rem:e}, 4", "jz 11f", "9:", "cmp {rem:e}, 2", "jb 10f", "mov {buf:x}, word ptr [{src} + {rem} - 2]", "mov word ptr [{dest} + {rem} - 2], {buf:x}", "sub {rem:e}, 2", "jz 11f", "10:", "cmp {rem:e}, 1", "jb 11f", "mov {buf:l}, byte ptr [{src} + {rem} - 1]", "mov byte ptr [{dest} + {rem} - 1], {buf:l}", "11:", src = in(reg) src, dest = in(reg) dest, rem = inout(reg) rem => _, buf = out(reg) _, options(nostack), ); } } /// append `data` to `buf`, assuming `data` is less than 16 bytes and that `buf` has enough space /// remaining to hold all bytes in `data`. /// /// Safety: callers must ensure that `buf.capacity() - buf.len() >= data.len()`. #[inline(always)] unsafe fn append_string_lt_16_unchecked(buf: &mut alloc::string::String, data: &str) { // SAFETY: todo let buf = unsafe { buf.as_mut_vec() }; let new_bytes = data.as_bytes(); // should get DCE if new_bytes.len() >= 16 { unsafe { core::hint::unreachable_unchecked() } } unsafe { let dest = buf.as_mut_ptr().offset(buf.len() as isize); let src = new_bytes.as_ptr(); let rem = new_bytes.len() as isize; // set_len early because there is no way to avoid the following asm!() writing that // same number of bytes into buf buf.set_len(buf.len() + new_bytes.len()); core::arch::asm!( "7:", "cmp {rem:e}, 8", "jb 8f", "mov {buf:r}, qword ptr [{src} + {rem} - 8]", "mov qword ptr [{dest} + {rem} - 8], {buf:r}", "sub {rem:e}, 8", "jz 11f", "8:", "cmp {rem:e}, 4", "jb 9f", "mov {buf:e}, dword ptr [{src} + {rem} - 4]", "mov dword ptr [{dest} + {rem} - 4], {buf:e}", "sub {rem:e}, 4", "jz 11f", "9:", "cmp {rem:e}, 2", "jb 10f", "mov {buf:x}, word ptr [{src} + {rem} - 2]", "mov word ptr [{dest} + {rem} - 2], {buf:x}", "sub {rem:e}, 2", "jz 11f", "10:", "cmp {rem:e}, 1", "jb 11f", "mov {buf:l}, byte ptr [{src} + {rem} - 1]", "mov byte ptr [{dest} + {rem} - 1], {buf:l}", "11:", src = in(reg) src, dest = in(reg) dest, rem = inout(reg) rem => _, buf = out(reg) _, options(nostack), ); } } /// append `data` to `buf`, assuming `data` is less than 32 bytes and that `buf` has enough space /// remaining to hold all bytes in `data`. /// /// Safety: callers must ensure that `buf.capacity() - buf.len() >= data.len()`. #[inline(always)] unsafe fn append_string_lt_32_unchecked(buf: &mut alloc::string::String, data: &str) { // SAFETY: todo let buf = unsafe { buf.as_mut_vec() }; let new_bytes = data.as_bytes(); // should get DCE if new_bytes.len() >= 32 { unsafe { core::hint::unreachable_unchecked() } } unsafe { let dest = buf.as_mut_ptr().offset(buf.len() as isize); let src = new_bytes.as_ptr(); let rem = new_bytes.len() as isize; // set_len early because there is no way to avoid the following asm!() writing that // same number of bytes into buf buf.set_len(buf.len() + new_bytes.len()); core::arch::asm!( "6:", "cmp {rem:e}, 16", "jb 7f", "mov {buf:r}, qword ptr [{src} + {rem} - 16]", "mov qword ptr [{dest} + {rem} - 16], {buf:r}", "mov {buf:r}, qword ptr [{src} + {rem} - 8]", "mov qword ptr [{dest} + {rem} - 8], {buf:r}", "sub {rem:e}, 16", "jz 11f", "7:", "cmp {rem:e}, 8", "jb 8f", "mov {buf:r}, qword ptr [{src} + {rem} - 8]", "mov qword ptr [{dest} + {rem} - 8], {buf:r}", "sub {rem:e}, 8", "jz 11f", "8:", "cmp {rem:e}, 4", "jb 9f", "mov {buf:e}, dword ptr [{src} + {rem} - 4]", "mov dword ptr [{dest} + {rem} - 4], {buf:e}", "sub {rem:e}, 4", "jz 11f", "9:", "cmp {rem:e}, 2", "jb 10f", "mov {buf:x}, word ptr [{src} + {rem} - 2]", "mov word ptr [{dest} + {rem} - 2], {buf:x}", "sub {rem:e}, 2", "jz 11f", "10:", "cmp {rem:e}, 1", "jb 11f", "mov {buf:l}, byte ptr [{src} + {rem} - 1]", "mov byte ptr [{dest} + {rem} - 1], {buf:l}", "11:", src = in(reg) src, dest = in(reg) dest, rem = inout(reg) rem => _, buf = out(reg) _, options(nostack), ); } }