| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2023-07-04 | two more test cases | iximeow | |
| 2023-07-04 | fix some dancing between bank size and RegisterBank enum values | iximeow | |
| in the process, fixed a decoding bug dealing with a0/a1/a2/a3 movs (respected rex.b when rex.b should have been ignored) this seems to maybe improve runtime ever so slightly, but this is really meant as a cleanup commit more than anything. | |||
| 2023-03-05 | add `Opcode::is_jcc`, `Opcode::is_setcc`, and `Opcode::is_cmovcc` helpers | iximeow | |
| this request/suggestion comes from [github](https://github.com/iximeow/yaxpeax-x86/issues/29)! thank you! | |||
| 2022-05-01 | add testing setup for field descriptions | iximeow | |
| 2022-04-24 | fix a few issues preventing no-std builds from ... building | iximeow | |
| this includes a `Makefile` that exercises the various crate configs. most annoyingly, several doc comments needed to grow `#[cfg(feature="fmt")]` blocks so docs continue to build with that feature enabled or disabled. carved out a way to run exhaustive tests; they should be written as `#[ignore]`, and then the makefile will run even ignored tests on the expectation that this will run the exhaustive (but slower) suite. exhaustive tests are not yet written. they'll probably involve spanning 4 byte sequences from 0 to 2^32-1. | |||
| 2021-12-19 | fix incorrect memory size for f30f1e-style nop | iximeow | |
| not only did the instruction have wrong data, but if displayed, the formatter would panic. | |||
| 2021-12-19 | test that invalid RegSpec constructions panic as expected | iximeow | |
| in the process, fix 64-bit rex-byte limit, 32/16-bit mode mask reg limit | |||
| 2021-12-17 | do not panic on negative compressed displacements, i mean it!! | iximeow | |
| 2021-12-16 | displacements are stored as unsigned, but are functionally signed ints | iximeow | |
| so multiplying to expand EVEX compressed offsets can overflow, and that needs to be okay. | |||
| 2021-10-10 | support endbr{32,64} | iximeow | |
| 2021-08-21 | fix negative relative branches (again!!! +- is bad!!!) | iximeow | |
| 2021-08-21 | fix incorrect decoding of 0x9*-series instructions with rex.b | iximeow | |
| 2021-08-14 | relative branches should be shown as $+offset, not just plain offset | iximeow | |
| while x86 branches of immediates are all relative to PC, other architectures may have absolute branches to immediate addresses, leaving this syntax ambiguous and potentially confusing. yaxpeax prefers to write relative offsets `$+...` as a rule, so uphold that here. | |||
| 2021-07-22 | fix incorrect decodes with scas and 67-prefixes1.0.4 | iximeow | |
| 2021-07-04 | support vpscatter{dd,dq,qd,qq} | iximeow | |
| 2021-07-04 | support avx512 registers >=16 | iximeow | |
| 2021-07-04 | handle vzeroupper/vzeroall, reject vzero* with nonzero vvvv | iximeow | |
| 2021-07-04 | support xacquire/xrelease prefixing | iximeow | |
| 2021-07-04 | fix several incorrect tests and docs in 64- and 32-bit modes | iximeow | |
| 2021-07-03 | more carefully test mmx operand sizes | iximeow | |
| 2021-07-03 | be more strict about denying invalid operands | iximeow | |
| 2021-07-03 | support AMD `sev_snp` | iximeow | |
| 2021-07-03 | instructions with evex-coded registers may have registers other than 0 | iximeow | |
| 2021-07-03 | enforce reserved evex prefix bits | iximeow | |
| 2021-07-03 | add hreset | iximeow | |
| 2021-07-03 | support pconfig/tme | iximeow | |
| 2021-07-01 | reallocate OperandCode, convert disparate registers to array | iximeow | |
| also remove redundant assignments of operand_count and some OperandSpec, bulk-assign all registers and operands on entry to `read_instr`. this all, taken together, shaves off about 7 cycles per decode. | |||
| 2021-06-27 | add randomized testing against incorrect data in reused instructions | iximeow | |
| 2021-06-27 | all tests now passing for long mode | iximeow | |
| 2021-06-27 | report memory sizes for all long-mode instructions | iximeow | |
| 2021-06-26 | add long-mode avx512 support, except for compressed displacements | iximeow | |
| 2021-06-12 | finish up long mode avx2 | iximeow | |
| 2021-06-11 | add extensive avx and initial avx2 tests, fix several bugs and missing ↵ | iximeow | |
| instructions | |||
| 2021-03-21 | add tsxldtrk | iximeow | |
| does intel know no bounds | |||
| 2021-03-21 | xed says setssbsy and saveprevssp are more permissive | iximeow | |
| 2021-03-21 | add missing vpmaxuw, remove nonsense avx mov | iximeow | |
| 2021-03-21 | complete CET support, add UINTR, add missing VORP{S,D}, other cleanup | iximeow | |
| 2021-03-21 | add waitpkg, clean up unused values, old comments | iximeow | |
| 2021-03-21 | add tdx | iximeow | |
| decoder flag to come | |||
| 2021-03-21 | rewrite 0f-based instruction handling | iximeow | |
| this is... a more significant rewrite than i expected yaxpeax-x86 to ever need. it turns out that capstone is extremely permissive about duplicative 66/f2/f3 prefixes to the point that the implemented prefex handling was unsalvageable. while this replaces the *0f* opcode tables, i haven't profiled these changes. it's possible this is a net improvement for single-byte opcodes, it could be a net loss. code size may be severely impacted. there is still work to do. but this in total gets very close to iced/xed/zydis parity, far more than before. also adds several small extensions, gfni, 3dnow, enqcmd, invpcid, some of cet, and a few missing avx instructions. | |||
| 2021-03-17 | support several new extensions, 3dnow, and nuance in invalid operands | iximeow | |
| 2021-03-14 | alternate display mode for c-style expressions | iximeow | |
| 2021-01-15 | support xchg AX/reg0.1.5 | iximeow | |
| 2021-01-15 | fix several missing or invalid decodings among 0f01 opcodes | iximeow | |
| * `mwaitx`, `monitorx`, `rdpru`, and `clzero` are now supported * swapgs is no longer decoded in protected mode * rdpkru and wrpkru are no longer decoded if mod bits != 11 | |||
| 2020-11-19 | fix decoding of rex-prefixed modrm+sib operands selecting index 0b100 and ↵0.1.4 | iximeow | |
| base 0b101 for memory operands with a base, index, and displacement either the wrong base would be selected (register number ignored, so only `*ax` or `r8*` would be reported), or yaxpeax-x86 would report a base register is present when it is not (`RegIndexBaseScaleDisp` when the operand is actually `RegScaleDisp`) thank you to Evan Johnson for catching and reporting this bug! also bump crate version to 0.1.4 as this will be immediately tagged and released. | |||
| 2020-10-27 | fix misdecode of instructions in opcode 0x800.1.3 | iximeow | |
| 2020-08-09 | adjust public interface: public items should all be stable | iximeow | |
| `OperandCode` (obviously) wildly varies depending on how i feel on a given week, so it's now hidden to avoid people depending on numerical values of its discriminants. `RegisterBank` got a similar treatment with a new `RegisterClass` struct that's suitable for public use. | |||
| 2020-08-09 | reject instructions made invalid by lock prefixes | iximeow | |
| 2020-08-09 | support salc, get segment register numbers right | iximeow | |
| 2020-08-09 | tests for clts | iximeow | |
 |
index : yaxpeax-x86 | |
| yaxpeax x86 decoder |
| aboutsummaryrefslogtreecommitdiff |