path: root/src/x86_64.rs

use core::fmt;
use core::mem::size_of;
use core::num::NonZero;
use core::ptr::NonNull;
use nix::sys::mman::{MapFlags, ProtFlags};

use kvm_ioctls::{Kvm, VcpuFd, VmFd};
use kvm_bindings::{
    kvm_cpuid_entry2, kvm_guest_debug,
    kvm_userspace_memory_region, kvm_segment, CpuId,
    KVM_GUESTDBG_ENABLE, KVM_GUESTDBG_SINGLESTEP, KVM_MAX_CPUID_ENTRIES,
};

pub use kvm_bindings::{kvm_regs, kvm_sregs, kvm_xcrs, kvm_debug_exit_arch};

const _TARGET_IS_64BIT: () = {
    assert!(size_of::<u64>() == size_of::<usize>(), "asmlinator only supports 64-bit targets");
};

// the wanton casting between usize and u64 is justifiable here because TARGET_IS_64BIT above:
fn usize_to_u64(x: usize) -> u64 {
    let _ = _TARGET_IS_64BIT;

    x as u64
}

fn u64_to_usize(x: u64) -> usize {
    let _ = _TARGET_IS_64BIT;

    x as usize
}

/// a test VM for running arbitrary instructions.
///
/// there is one CPU which is configured for long-mode execution. all memory is
/// identity-mapped with 1GiB pages. page tables are configured to cover 512 GiB of memory, but
/// much much less than that is actually allocated and usable through `memory.`
///
/// it is configured with `mem_size` bytes of memory at guest address 0, accessible through
/// host pointer `memory`. this region is used for "control structures"; page tables, GDT, IDT,
/// and stack. it is also the region where code to be executed is placed.
pub struct Vm {
    vm: VmFd,
    vcpu: VcpuFd,
    supported_cpuid: CpuId,
    current_cpuid: CpuId,
    idt_configured: bool,
    mem_ceiling: u64,
    memory: Mapping,
    aux_memories: Vec<Mapping>,
}

/// broad categories of cpuid/cpu features that should be detectable or configurable as part of
/// setting up a VM. this is split out for legibility, but also because in theory these (especially
/// ISA extensions) features probably should be configurable by library users somehow..
///
/// not yet sure, so this is not pub.
#[derive(Copy, Clone, Debug)]
enum Feature {
    /// support for the xsave/xrstor instructions and at least xcr0.
    ///
    /// cpuid leaf eax=0x0000_0001 bit ecx[26], see APM
    /// chapter "Obtaining Processor Information Via the CPUID Instruction",
    /// section "Standard Feature Function Numbers".
    XSave,
    /// support for 1GB page mappings. cpuid leaf eax=0x8000_0001 bit edx[26].
    Pdpe1Gb,
    /// support for the XSAVE SSE region. this correponds to the bit in CPUID leaf D and
    /// corresponding bit in xcr0. if this bit is unset, attempts to use instructions with xmm
    /// state will #UD.
    StateSSE,
    /// support for the XSAVE AVX region. this correponds to the bit in CPUID leaf D and
    /// corresponding bit in xcr0. if this bit is unset, attempts to use instructions with ymm
    /// state will #UD.
    StateAVX,
    /// support for the XSAVE AVX512 regions. this correponds to the bits for K, ZMM_Hi256, and
    /// Hi16_ZMM in CPUID leaf D and corresponding bits in xcr0. if these bits are not set,
    /// attempts to use instructions with zmm state may #UD.
    StateAVX512,
}

const CPUID_00000001_ECX_XSAVE: u32 = 1 << 26;

const CPUID_0000000D_EAX_SSE: u32 = 1 << 1;
const CPUID_0000000D_EAX_AVX: u32 = 1 << 2;
const CPUID_0000000D_EAX_AVX512: u32 = (1 << 5) | (1 << 6) | (1 << 7);

const CPUID_80000001_EDX_PDPE1GB: u32 = 1 << 26;

#[derive(PartialEq)]
pub enum VcpuExit<'buf> {
    MmioRead { addr: u64, buf: &'buf mut [u8] },
    MmioWrite { addr: u64, buf: &'buf [u8] },
    IoIn { port: u16, buf: &'buf mut [u8] },
    IoOut { port: u16, buf: &'buf [u8] },
    Debug { pc: u64, info: kvm_debug_exit_arch },
    Exception { nr: u8 },
    Shutdown,
    Hlt,
}

impl<'buf> fmt::Debug for VcpuExit<'buf> {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        use VcpuExit::*;
        match self {
            MmioRead { addr, buf } => {
                let size = buf.len();
                write!(f, "VcpuExit::MmioRead {{ addr: {addr:#08x}, size: {size} }}")
            },
            MmioWrite { addr, buf } => {
                let size = buf.len();
                write!(f, "VcpuExit::MmioWrite {{ addr: {addr:#08x}, size: {size} }}")
            },
            IoIn { port, buf } => {
                let size = buf.len();
                write!(f, "VcpuExit::IoIn {{ port: {port:#04x}, size: {size} }}")
            },
            IoOut { port, buf } => {
                let size = buf.len();
                write!(f, "VcpuExit::IoOut {{ port: {port:#04x}, size: {size} }}")
            },
            Debug { pc, info: _ } => {
                write!(f, "VcpuExit::Debug {{ pc: {pc:#016x}, _ }}")
            },
            Exception { nr } => {
                write!(f, "VcpuExit::Exception {{ nr: {nr} }}")
            },
            Shutdown => {
                write!(f, "VcpuExit::Shutdown")
            },
            Hlt => {
                write!(f, "VcpuExit::Hlt")
            }
        }
    }
}


const GB: u64 = 1 << 30;

// TODO: cite APM/SDM
const IDT_ENTRIES: u16 = 256;

#[derive(Copy, Clone)]
pub struct GuestAddress(pub u64);

pub struct VmPageTables<'vm> {
    vm: &'vm Vm,
    base: GuestAddress,
}

impl<'vm> VmPageTables<'vm> {
    pub fn pml4_addr(&self) -> GuestAddress {
        self.base
    }

    pub fn pdpt_addr(&self) -> GuestAddress {
        GuestAddress(self.base.0 + 0x1000)
    }

    pub fn pml4_mut(&self) -> *mut u64 {
        // SAFETY: creating VmPageTables implies we've asserted that we can form host pointers
        // for all addresses in the page tables.
        unsafe {
            self.vm.host_ptr(self.pml4_addr()) as *mut u64
        }
    }

    pub fn pdpt_mut(&self) -> *mut u64 {
        // SAFETY: creating VmPageTables implies we've asserted that we can form host pointers
        // for all addresses in the page tables.
        unsafe {
            self.vm.host_ptr(self.pdpt_addr()) as *mut u64
        }
    }
}

fn encode_segment(seg: &kvm_segment) -> u64 {
    let base = seg.base as u64;
    let limit = seg.limit as u64;

    let lim_low = limit & 0xffff;
    let lim_high = (limit >> 16) & 0xf;
    let addr_low = base & 0xffff;
    let desc_low = lim_low | (addr_low << 16);

    let base_mid = (base >> 16) & 0xff;
    let base_high = (base >> 24) & 0xff;
    let access_byte = (seg.type_ as u64)
        | (seg.s as u64) << 4
        | (seg.dpl as u64) << 5
        | (seg.present as u64) << 7;
    let flaglim_byte = lim_high
        | (seg.avl as u64) << 4
        | (seg.l as u64) << 5
        | (seg.db as u64) << 6
        | (seg.g as u64) << 7;
    let desc_high = base_mid
        | access_byte << 8
        | flaglim_byte << 16
        | base_high << 24;

    desc_low | (desc_high << 32)
}

pub enum VmCreateError {
    /// the requested VM was smaller than `asmlinator`'s minimum allowable size.
    TooSmall { requested: usize, required: usize },
    /// the requested VM's memory size was not an even number of pages.
    BadSize { requested: usize, unit: usize },
    /// one of the several syscalls in setting up a new VM failed.
    ///
    /// this is most likely a permissions error, or `/dev/kvm` doesn't exist. otherwise, something
    /// interesting happened!
    ///
    /// this deserves better documentation, but i'm not aware of documentation for KVM ioctl
    /// failure modes.
    SyscallError { op: &'static str, err: nix::errno::Errno },
    /// `base` and `size` are not valid for mapping; either because of over/underflow, or overlaps
    /// with an existing mapping.
    InvalidMapping { base: GuestAddress, size: u64 }
}

impl fmt::Debug for VmCreateError {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        match self {
            VmCreateError::TooSmall { requested, required } => {
                write!(f, "requested memory size ({requested}) is too small, must be at least {required}")
            }
            VmCreateError::BadSize { requested, unit } => {
                write!(f, "requested memory size ({requested}) is not a multiple of ({unit})")
            }
            VmCreateError::SyscallError { op, err } => {
                write!(f, "error at {op}: {err}")
            }
            VmCreateError::InvalidMapping { base, size } => {
                write!(f, "invalid mapping (gpa={:#08x}/size={:08x})", base.0, size)
            }
        }
    }
}

impl fmt::Debug for VmError {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        match self {
            VmError::BadSize { requested, unit } => {
                write!(f, "requested memory size ({requested}) is not a multiple of ({unit})")
            }
            VmError::SyscallError { op, err } => {
                write!(f, "error at {op}: {err}")
            }
            VmError::InvalidMapping { base, size } => {
                write!(f, "invalid mapping (gpa={:#08x}/size={:08x})", base.0, size)
            }
        }
    }
}


pub enum VmError {
    /// the requested VM's memory size was not an even number of pages.
    BadSize { requested: usize, unit: usize },
    /// one of the several syscalls in operating a VM failed.
    ///
    /// this deserves better documentation, but i'm not aware of documentation for KVM ioctl
    /// failure modes.
    SyscallError { op: &'static str, err: nix::errno::Errno },
    /// `base` and `size` are not valid for mapping; either because of over/underflow, or overlaps
    /// with an existing mapping.
    InvalidMapping { base: GuestAddress, size: u64 }
}

impl VmError {
    fn from_kvm(op: &'static str, err: kvm_ioctls::Error) -> Self {
        Self::SyscallError { op, err: nix::errno::Errno::from_raw(err.errno()) }
    }
}

impl From<VmError> for VmCreateError {
    fn from(other: VmError) -> Self {
        match other {
            VmError::BadSize { requested, unit } => VmCreateError::BadSize { requested, unit },
            VmError::SyscallError { op, err } => VmCreateError::SyscallError { op, err },
            VmError::InvalidMapping { base, size } => VmCreateError::InvalidMapping { base, size },
        }
    }
}

/// a `mmap`'d region, `munmap`'d on drop.
struct Mapping {
    guest_addr: usize,
    addr: NonNull<core::ffi::c_void>,
    size: NonZero<usize>,
}

impl Drop for Mapping {
    fn drop(&mut self) {
        let res = unsafe {
            nix::sys::mman::munmap(self.addr, self.size.get())
        };
        res.expect("can unmap a region we mapped");
    }
}

impl Mapping {
    fn create_shared(guest_addr: usize, size: usize, prot: ProtFlags) -> Result<Self, VmError> {
        if size % 4096 != 0 {
            return Err(VmError::BadSize {
                requested: size,
                unit: 4096,
            });
        }

        let size = NonZero::new(size)
            .ok_or(VmError::BadSize {
                requested: 0,
                unit: 0,
            })?;

        let map_res = unsafe {
            nix::sys::mman::mmap_anonymous(
                None,
                size,
                prot,
                MapFlags::MAP_ANONYMOUS | MapFlags::MAP_SHARED,
            )
        };

        let map_addr = map_res
            .map_err(|e| VmError::SyscallError { op: "mmap", err: e })?;

        // look, mmap should only be in the business of returning page-aligned addresses but i
        // just wanna see it, you know...
        assert!(map_addr.as_ptr() as usize % 4096 == 0);

        Ok(Self {
            guest_addr,
            addr: map_addr,
            size,
        })
    }

    /// SAFETY: the caller must not use the returned pointer to violate reference safety of the VM.
    /// the pointer must not be turned into a reference while running the VM, etc.
    ///
    /// panics if `address` is not contained in this mapping.
    unsafe fn host_ptr(&self, address: GuestAddress) -> *mut u8 {
        let guest_addr: u64 = usize_to_u64(self.guest_addr);
        let offset = address.0.checked_sub(guest_addr)
            .expect("guest address is above mapping base");

        let base = self.addr.as_ptr() as *mut u8;

        unsafe {
            base.offset(offset as isize)
        }
    }

    /// SAFETY: the caller must ensure that this mapping covers `base` and that there are at least
    /// `size` bytes at `base` before the end of this mapping.
    unsafe fn slice_mut(&mut self, base: GuestAddress, size: u64) -> &mut [u8] {
        let ptr = unsafe { self.host_ptr(base) };

        unsafe {
            core::slice::from_raw_parts_mut(ptr, u64_to_usize(size))
        }
    }

    /// SAFETY: the caller must ensure that this mapping covers `base` and that there are at least
    /// `size` bytes at `base` before the end of this mapping.
    unsafe fn slice(&self, base: GuestAddress, size: u64) -> &[u8] {
        let ptr = unsafe { self.host_ptr(base) };

        unsafe {
            core::slice::from_raw_parts(ptr, u64_to_usize(size))
        }
    }

    fn overlaps(&self, base: GuestAddress, index_end: GuestAddress) -> bool {
        let map_base: u64 = usize_to_u64(self.guest_addr);
        let map_end = map_base.checked_add(usize_to_u64(self.size.get())).unwrap();

        let enclosed_by = base.0 <= map_base && index_end.0 >= map_end;
        let contains_base = base.0 >= map_base && base.0 < map_end;
        let contains_end = index_end.0 >= map_base && index_end.0 <= map_end;

        enclosed_by || contains_base || contains_end
    }

    fn contains(&self, base: GuestAddress) -> bool {
        let end = self.guest_addr.checked_add(self.size.get()).unwrap();

        base.0 >= self.guest_addr as u64 && base.0 < end as u64
    }

    fn check_range(&self, base: GuestAddress, size: u64) -> bool {
        let map_base: u64 = self.guest_addr.try_into().unwrap();
        let Some(offset) = base.0.checked_sub(map_base) else {
            return false;
        };
        let Some(end) = offset.checked_add(size) else {
            return false;
        };

        end <= self.size.get().try_into().unwrap()
    }
}

#[test]
fn test_check_range_exact() {
    let mapping = Mapping::create_shared(0x4000, 0x1000, ProtFlags::PROT_READ).expect("can create mapping");
    assert!(mapping.check_range(GuestAddress(0x4000), 0x1000));
}

#[test]
fn test_xor_runs() {
    let mut vm = Vm::create(128 * 1024).expect("can create vm");
    let mut regs = vm.get_regs().expect("can get regs");

    vm.program(&[0x33, 0xc0], &mut regs);

    regs.rax = 0x1234;
    let rip_before = regs.rip;

    vm.set_regs(&regs).expect("can set regs");

    vm.set_single_step(true).expect("can set single-step");

    let res = vm.run().expect("can run vm");

    let expected_rip = rip_before + 2;
    match res {
        VcpuExit::Debug { pc: rip_after, .. } => {
            assert_eq!(expected_rip, rip_after);
        }
        other => {
            panic!("unexpected exit: {:?}", other);
        }
    };

    let regs_after = vm.get_regs().expect("can get regs");
    assert_eq!(regs_after.rax, 0);
}

#[test]
fn test_xorps_runs() {
    let mut vm = Vm::create(128 * 1024).expect("can create vm");
    let mut regs = vm.get_regs().expect("can get regs");

    vm.program(&[0x0f, 0x57, 0xc0], &mut regs);

    let rip_before = regs.rip;

    vm.set_regs(&regs).expect("can set regs");

    vm.set_single_step(true).expect("can set single-step");

    let res = vm.run().expect("can run vm");

    let expected_rip = rip_before + 3;
    eprintln!("exit: {:?}", res);
    match res {
        VcpuExit::Debug { pc: rip_after, .. } => {
            assert_eq!(expected_rip, rip_after);
        }
        other => {
            panic!("unexpected exit: {:?}", other);
        }
    };
}

#[test]
fn test_vex_vandps_runs() {
    let mut vm = Vm::create(128 * 1024).expect("can create vm");

    if !vm.cpuid_supports(Feature::StateAVX) {
        panic!("host CPU does not support AVX");
    }

    let mut regs = vm.get_regs().expect("can get regs");

    vm.program(&[0xc5, 0xe0, 0x54, 0x03], &mut regs);

    regs.rbx = regs.rip;
    let rip_before = regs.rip;

    vm.set_regs(&regs).expect("can set regs");

    vm.set_single_step(true).expect("can set single-step");

    let res = vm.run().expect("can run vm");

    let expected_rip = rip_before + 4;
    eprintln!("exit: {:?}", res);
    match res {
        VcpuExit::Debug { pc: rip_after, .. } => {
            assert_eq!(expected_rip, rip_after);
        }
        other => {
            panic!("unexpected exit: {:?}", other);
        }
    };
}

#[test]
fn test_evex_vandps_runs() {
    let mut vm = Vm::create(128 * 1024).expect("can create vm");

    if !vm.cpuid_supports(Feature::StateAVX512) {
        panic!("host CPU does not support AVX512");
    }

    let mut regs = vm.get_regs().expect("can get regs");

    vm.program(&[0x62, 0xf1, 0x7c, 0xbd, 0x54, 0x0a], &mut regs);

    regs.rbx = regs.rip;
    let rip_before = regs.rip;

    vm.set_regs(&regs).expect("can set regs");

    vm.set_single_step(true).expect("can set single-step");

    let res = vm.run().expect("can run vm");

    let expected_rip = rip_before + 6;
    eprintln!("exit: {:?}", res);
    match res {
        VcpuExit::Debug { pc: rip_after, .. } => {
            assert_eq!(expected_rip, rip_after);
        }
        other => {
            panic!("unexpected exit: {:?}", other);
        }
    };
}


// this function will sit and loop in the kernel after trying to fulfill the MMIO exit.
//
// not great! don't do that! it's responsive to EINTR at least.
// #[test]
#[allow(dead_code)]
fn kvm_hugepage_bug() {
    let mut vm = Vm::create(1024 * 1024).expect("can create vm");
    vm.add_memory(GuestAddress(0x1_0000_0000), 128 * 1024).expect("can add test mem region");
    unsafe {
        vm.configure_identity_paging(None);
    }

    // `add [rsp], al; add [rcx], al; pop [rcx]; hlt`
    // the first instruction runs fine. the second instruction runs fine.
    // the third instruction gets a page fault at 0xf800? which worked fine for the add.
    // this turns out to be an issue in linux' paging64_gva_to_gpa() when the va is mapped with
    // huge pages.
    let inst: &'static [u8] = &[0x00, 0x04, 0x24, 0x00, 0x01, 0x8f, 0x01, 0xf4];
    let mut regs = vm.get_regs().unwrap();
    regs.rax = 0x00000002_00100000;
    regs.rcx = 0x00000002_00100000;
    vm.program(inst, &mut regs);
    vm.set_regs(&regs).unwrap();
    vm.set_single_step(true).expect("can enable single-step");
    vm.run().expect("can run vm");

    let vm_regs = vm.get_regs().unwrap();
    let vm_sregs = vm.get_sregs().unwrap();
    let mut prev_rip = [0u8; 8];
    vm.read_mem(GuestAddress(vm_regs.rsp + 8), &mut prev_rip[..]);
    let mut buf = [0u8; 8];
    vm.read_mem(GuestAddress(vm_regs.rsp), &mut buf[..]);
    eprintln!(
        "error code: {:#08x} accessing {:016x} @ rip={:#016x} (cr3={:016x})",
        u64::from_le_bytes(buf), vm_sregs.cr2,
        u64::from_le_bytes(prev_rip), vm_sregs.cr3
    );
    if vm_regs.rip == 0x300f {
        let mut pdpt = [0u8; 4096];
        vm.read_mem(vm.page_tables().pdpt_addr(), &mut pdpt[..]);
        eprintln!("pdpt: {:x?}", &pdpt[..8]);
    }
    panic!("no");
}

impl Vm {
    pub fn create(mem_size: usize) -> Result<Vm, VmCreateError> {
        let kvm = Kvm::new()
            .map_err(|e| VmError::from_kvm("Kvm::new()", e))?;

        let vm = kvm.create_vm()
            .map_err(|e| VmError::from_kvm("craete_vm", e))?;

        let supported_cpuid = kvm.get_supported_cpuid(KVM_MAX_CPUID_ENTRIES).unwrap();

        // actual minimum is somewhere around 0x1a000 bytes, but 0x20_000 aka 128k will do
        if mem_size < 128 * 1024 {
            return Err(VmCreateError::TooSmall {
                requested: mem_size,
                required: 128 * 1024,
            });
        }

        let mapping = Mapping::create_shared(0, mem_size, ProtFlags::PROT_READ | ProtFlags::PROT_WRITE)?;

        let region = kvm_userspace_memory_region {
            slot: 0,
            guest_phys_addr: 0x0000,
            memory_size: mapping.size.get() as u64,
            userspace_addr: mapping.addr.as_ptr() as u64,
            flags: 0,
        };

        let set_res = unsafe { vm.set_user_memory_region(region) };
        set_res.map_err(|e| VmError::from_kvm("set_user_memory_region", e))?;

        let vcpu_res = vm.create_vcpu(0);
        let vcpu = vcpu_res.map_err(|e| VmError::from_kvm("create_vcpu(0)", e))?;

        let current_cpuid = vcpu.get_cpuid2(KVM_MAX_CPUID_ENTRIES).unwrap();

        let mem_ceiling = mapping.size.get().try_into().unwrap();

        let mut this = Vm {
            vm,
            vcpu,
            supported_cpuid,
            current_cpuid,
            idt_configured: false,
            memory: mapping,
            aux_memories: Vec::new(),
            mem_ceiling,
        };

        let mut vcpu_regs = this.get_regs()?;
        let mut vcpu_sregs = this.get_sregs()?;

        unsafe {
            this.configure_identity_paging(Some(&mut vcpu_sregs));
            this.configure_selectors(&mut vcpu_sregs);
            this.configure_idt(&mut vcpu_regs, &mut vcpu_sregs);
            let mut xcrs = this.get_xcrs()?;
            this.configure_extensions(&mut vcpu_sregs, &mut xcrs);
            this.set_xcrs(&xcrs)?;
        }

        vcpu_sregs.efer = 0x0000_0500; // LME | LMA

        this.set_regs(&vcpu_regs)?;
        this.set_sregs(&vcpu_sregs)?;

        Ok(this)
    }

    /// map and add a region of size `size` at guest-physical address `gpa`.
    ///
    /// this will not update page tables, so if the newly-added memory is not already mapped due to
    /// a previous `configure_identity_paging` call and it is not mapped due to explicit page table
    /// management, it will not yet be accessible by guest code.
    pub fn add_memory(&mut self, gpa: GuestAddress, size: u64) -> Result<(), VmError> {
        let new_mapping_end = gpa.0.checked_add(size)
            .map(|addr| GuestAddress(addr))
            .ok_or_else(|| VmError::InvalidMapping { base: gpa, size })?;
        if self.memory.overlaps(gpa, new_mapping_end) {
            return Err(VmError::InvalidMapping { base: gpa, size });
        } else {
            for mapping in self.aux_memories.iter() {
                if mapping.overlaps(gpa, new_mapping_end) {
                    return Err(VmError::InvalidMapping { base: gpa, size });
                }
            }
        }

        let mapping = Mapping::create_shared(
            u64_to_usize(gpa.0),
            u64_to_usize(size),
            ProtFlags::PROT_READ | ProtFlags::PROT_WRITE
        )?;

        let used_slots: u32 = self.aux_memories.len().try_into()
            .map_err(|_| VmError::InvalidMapping { base: gpa, size })?;
        let next_slot = used_slots.checked_add(1)
            .ok_or_else(|| VmError::InvalidMapping { base: gpa, size })?;

        let region = kvm_userspace_memory_region {
            slot: next_slot,
            guest_phys_addr: gpa.0,
            memory_size: mapping.size.get() as u64,
            userspace_addr: mapping.addr.as_ptr() as u64,
            flags: 0,
        };

        let set_res = unsafe { self.vm.set_user_memory_region(region) };
        set_res.map_err(|e| VmError::from_kvm("set_user_memory_region", e))?;

        self.aux_memories.push(mapping);

        if new_mapping_end.0 > self.mem_ceiling {
            self.mem_ceiling = new_mapping_end.0;
        }

        Ok(())
    }

    pub fn get_regs(&self) -> Result<kvm_regs, VmError> {
        self.vcpu.get_regs()
            .map_err(|e| VmError::from_kvm("get_regs", e))
    }

    pub fn get_sregs(&self) -> Result<kvm_sregs, VmError> {
        self.vcpu.get_sregs()
            .map_err(|e| VmError::from_kvm("get_sregs", e))
    }

    pub fn get_xcrs(&self) -> Result<kvm_xcrs, VmError> {
        self.vcpu.get_xcrs()
            .map_err(|e| VmError::from_kvm("get_xcrs", e))
    }

    pub fn set_regs(&self, regs: &kvm_regs) -> Result<(), VmError> {
        self.vcpu.set_regs(regs)
            .map_err(|e| VmError::from_kvm("set_regs", e))
    }

    pub fn set_sregs(&self, sregs: &kvm_sregs) -> Result<(), VmError> {
        self.vcpu.set_sregs(sregs)
            .map_err(|e| VmError::from_kvm("set_sregs", e))
    }

    pub fn set_xcrs(&self, xcrs: &kvm_xcrs) -> Result<(), VmError> {
        self.vcpu.set_xcrs(xcrs)
            .map_err(|e| VmError::from_kvm("set_xcrs", e))
    }

    pub fn idt_configured(&self) -> bool {
        self.idt_configured
    }

    // TODO: seems like there's a KVM bug where if the VM is configured for single-step and the
    // single-stepped instruction is a rmw to MMIO memory (or MMIO hugepages?), the single-step
    // doesn't actually take effect. compare `0x33 0x00` and `0x31 0x00`. what the hell!
    pub fn set_single_step(&mut self, active: bool) -> Result<(), VmError> {
        let mut guest_debug = kvm_guest_debug::default();

        if active {
            guest_debug.control = KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_SINGLESTEP
        };

        self.vcpu.set_guest_debug(&guest_debug)
            .map_err(|e| VmError::from_kvm("set_guest_debug", e))
    }

    pub fn run<'vm>(&'vm mut self) -> Result<VcpuExit<'vm>, VmError> {
        let exit = self.vcpu.run()
            .map_err(|e| VmError::from_kvm("vcpu run", e))?;

        match exit {
            kvm_ioctls::VcpuExit::MmioRead(addr, buf) => {
                // `buf` is typed with a lifetime from the reborrow of self.vcpu for run() above.
                // this means it's a shorter lifetime than `'vm`, but since the resulting lifetime
                // is also `'vm` it *really* has the effect of disallowing any subsequent use of
                // `self`. these transmutes decouple the lifetime of `exit` from the lifetime of
                // `self` and returned `VcpuExit`, so other arms that don't involve lifetimes can
                // drop `exit()` and query the vcpu.
                //
                // SAFETY: this actually extends the lifetime of `buf` from the shorter transient
                // lifetime to `'vm` for the return type.
                let buf: &'vm mut [u8] = unsafe { core::mem::transmute(buf) };
                return Ok(VcpuExit::MmioRead { buf, addr });
            }
            kvm_ioctls::VcpuExit::MmioWrite(addr, buf) => {
                // see the same transmute in `MmioRead` for why this is load-bearing.
                //
                // SAFETY: this actually extends the lifetime of `buf` from the shorter transient
                // lifetime to `'vm` for the return type.
                let buf: &'vm [u8] = unsafe { core::mem::transmute(buf) };
                return Ok(VcpuExit::MmioWrite { buf, addr });
            }
            kvm_ioctls::VcpuExit::IoIn(port, buf) => {
                // see the same transmute in `MmioRead` for why this is load-bearing.
                //
                // SAFETY: this actually extends the lifetime of `buf` from the shorter transient
                // lifetime to `'vm` for the return type.
                let buf: &'vm mut [u8] = unsafe { core::mem::transmute(buf) };
                return Ok(VcpuExit::IoIn { port, buf });
            }
            kvm_ioctls::VcpuExit::IoOut(port, buf) => {
                // see the same transmute in `MmioRead` for why this is load-bearing.
                //
                // SAFETY: this actually extends the lifetime of `buf` from the shorter transient
                // lifetime to `'vm` for the return type.
                let buf: &'vm [u8] = unsafe { core::mem::transmute(buf) };
                return Ok(VcpuExit::IoOut { port, buf });
            }
            kvm_ioctls::VcpuExit::Debug(info) => {
                let pc = info.pc;
                return Ok(VcpuExit::Debug { pc, info });
            }
            kvm_ioctls::VcpuExit::Hlt => {
                let regs = self.get_regs()?;

                if self.idt_configured {
                    let intrs_start = self.interrupt_handlers_start().0;
                    let intrs_end = intrs_start + IDT_ENTRIES as u64;
                    // by the time we've exited the `hlt` of the interrupt handler has completed,
                    // so rip is advanced by one. subtract back out to convert to an exception
                    // vector number.
                    let intr_addr = regs.rip - 1;

                    if intr_addr >= intrs_start && intr_addr < intrs_end {
                        let nr = intr_addr - intrs_start;
                        // because IDT_ENTRIES is 256, this should always be true..
                        assert!(nr < 256);
                        let nr = nr as u8;

                        return Ok(VcpuExit::Exception { nr });
                    }
                }

                Ok(VcpuExit::Hlt)
            }
            kvm_ioctls::VcpuExit::Shutdown => {
                return Ok(VcpuExit::Shutdown);
            }
            other => {
                panic!("unhandled VcpuExit kind: {other:?}");
            }
        }
    }

    /// get a pointer to host memory mapped to guest address `address`.
    ///
    /// panics if `address` is not a guest-physical address backed by host memory.
    pub unsafe fn host_ptr(&self, address: GuestAddress) -> *mut u8 {
        let mapping = self.map_containing(address, 0)
            .expect("mapping for address exists");

        unsafe {
            mapping.host_ptr(address)
        }
    }

    pub fn gdt_addr(&self) -> GuestAddress {
        GuestAddress(0x1000)
    }

    pub fn idt_addr(&self) -> GuestAddress {
        GuestAddress(0x2000)
    }

    pub fn interrupt_handlers_start(&self) -> GuestAddress {
        GuestAddress(0x3000)
    }

    pub fn page_table_addr(&self) -> GuestAddress {
        GuestAddress(0x10000)
    }

    pub fn code_addr(&self) -> GuestAddress {
        GuestAddress(self.memory.size.get() as u64 - 4096)
    }

    pub fn mem_ceiling(&self) -> u64 {
        self.mem_ceiling
    }

    /// configuring the IDT implies the IDT might be used which means we want a stack pointer
    /// that can have at least 0x18 bytes pushed to it if an interrupt happens.
    pub fn stack_addr(&self) -> GuestAddress {
        // it would be nice to point the stack somewhere that we could get MMIO exits and see the
        // processor push words for the interrupt in real time, but that doesn't ... work.
        // instead, you end up in a loop somewhere around svm_vcpu_run (which you can ^C out of,
        // thankfully).
        //
        // so this picks some guest memory lower down.

        // stack grows *down* but if someone pops a lot of bytes from rsp we'd go up and
        // clobber the page tables. so leave a bit of space.
        GuestAddress(0x19800)
    }

    /// selector 0x10 is chosen arbitrarily for code.
    pub fn selector_cs(&self) -> u16 {
        0x10
    }

    /// selector 0x18 is chosen arbitrarily for data (all segments; ss, ds, es, etc).
    pub fn selector_ds(&self) -> u16 {
        0x18
    }

    fn map_containing_mut(&mut self, base: GuestAddress, size: u64) -> Option<&mut Mapping> {
        let mapping = if self.memory.contains(base) {
            &mut self.memory
        } else {
            self.aux_memories.iter_mut()
                .find(|map| map.contains(base))?
        };

        if !mapping.check_range(base, size) {
            return None;
        }

        Some(mapping)
    }

    fn map_containing(&self, base: GuestAddress, size: u64) -> Option<&Mapping> {
        let mapping = if self.memory.contains(base) {
            &self.memory
        } else {
            self.aux_memories.iter()
                .find(|map| map.contains(base))?
        };

        if !mapping.check_range(base, size) {
            return None;
        }

        Some(mapping)
    }

    /// write all of `data` into guest memory at guest-physical address `addr`.
    ///
    /// panics if `data` extends beyond the end of guest memory.
    pub fn write_mem(&mut self, addr: GuestAddress, data: &[u8]) {
        let mapping = self.map_containing(addr, data.len() as u64).expect("mapping is valid");

        // SAFETY: `check_range` above validates the range to copy, and... please do not
        // provide a slice of guest memory as what the guest should be programmed for...
        unsafe {
            std::ptr::copy_nonoverlapping(
                data.as_ptr(),
                mapping.host_ptr(addr),
                data.len()
            );
        }
    }

    /// read guest-physical memory at `addr` to `addr + buf.len()` into `buf`.
    ///
    /// panics if `addr + buf.len()` extends beyond the end of guest memory.
    pub fn read_mem(&mut self, addr: GuestAddress, buf: &mut [u8]) {
        let mapping = self.map_containing(addr, buf.len() as u64).expect("mapping is valid");

        // SAFETY: `check_range` above validates the range to copy, and... please do not
        // provide a slice of guest memory as what should be read into...
        unsafe {
            std::ptr::copy_nonoverlapping(
                mapping.host_ptr(addr) as *const _,
                buf.as_mut_ptr(),
                buf.len()
            );
        }
    }

    /// returns a slice of guest memory pointed to by guest-physical address `addr`, of size
    /// `size`.
    ///
    /// panics if `addr + size` is not enclosed in a single guest mapping. this crate doesn't
    /// support returning a single slice of adjacent guest memory regions (yet?), sorry.
    pub fn mem_slice_mut<'vm>(&'vm mut self, addr: GuestAddress, size: u64) -> &'vm mut [u8] {
        let mapping = self.map_containing_mut(addr, size).expect("mapping is valid");

        // SAFETY: we have an exclusive borrow of the VM, so it is not currently running, and there
        // is no other outstanding slice of guest memory. `map_containing` has already ensured that
        // this mapping contains the whole range `[addr, addr + size)`.
        unsafe {
            mapping.slice_mut(addr, size)
        }
    }

    /// returns a slice of guest memory pointed to by guest-physical address `addr`, of size
    /// `size`.
    ///
    /// panics if `addr + size` is not enclosed in a single guest mapping. this crate doesn't
    /// support returning a single slice of adjacent guest memory regions (yet?), sorry.
    pub fn mem_slice<'vm>(&'vm self, addr: GuestAddress, size: u64) -> &'vm [u8] {
        let mapping = self.map_containing(addr, size).expect("mapping is valid");

        // SAFETY: we have an exclusive borrow of the VM, so it is not currently running, and there
        // is no other outstanding slice of guest memory. `map_containing` has already ensured that
        // this mapping contains the whole range `[addr, addr + size)`.
        unsafe {
            mapping.slice(addr, size)
        }
    }

    /// write `code` into guest memory and set `regs.rip` to the address of that code.
    ///
    /// the chosen code address is [`Self::code_addr`].
    pub fn program(&mut self, code: &[u8], regs: &mut kvm_regs) {
        let addr = self.code_addr();
        self.write_mem(addr, code);

        regs.rip = addr.0;
    }

    fn gdt_entry_mut(&mut self, idx: u16) -> *mut u64 {
        // the GDT is set up at addresses 0..64k:
        //
        // > 3.5.1 Segment Descriptor Tables
        // > A segment descriptor table is an array of segment descriptors (see Figure 3-10). A
        // > descriptor table is variable in length and can contain up to 8192 (2^13) 8-byte
        // > descriptors.

        assert!(idx < 4096 / 8);
        let addr = GuestAddress(self.gdt_addr().0 + (idx as u64 * 8));
        let mapping = self.map_containing(addr, std::mem::size_of::<u64>() as u64).unwrap();

        // SAFETY: idx * 8 can't overflow isize, and we've asserted the end of the pointer is
        // still inside the allocation (`self.memory`).
        unsafe {
            mapping.host_ptr(addr) as *mut u64
        }
    }

    // note this returns a u32, but an IDT is four u32. the u32 this points at is the first of
    // the four for the entry.
    fn idt_entry_mut(&mut self, idx: u8) -> *mut u32 {
        let addr = GuestAddress(self.idt_addr().0 + (idx as u64 * 16));
        let mapping = self.map_containing(addr, std::mem::size_of::<[u64; 2]>() as u64).unwrap();

        unsafe {
            mapping.host_ptr(addr) as *mut u32
        }
    }

    pub fn page_tables(&self) -> VmPageTables<'_> {
        let base = self.page_table_addr();

        // the page tables are really just two pages: a PML4 and a PDPT for its first 512G of
        // address space.
        assert!(self.map_containing(base, 0x2000).is_some());

        VmPageTables {
            vm: self,
            base,
        }
    }

    // TODO: there should be a version of this that can be used to query "does this VM support
    // these extensions" probably, and that should take a subset of `Feature` for the ones that are
    // actually related to ISA support (e.g. Pdpe1Gb isn't really useful as a public queryable
    // feature..)
    fn cpuid_supports(&self, feature: Feature) -> bool {
        fn find_leaf(cpuid: &CpuId, leaf: u32, index: u32, f: impl Fn(&kvm_cpuid_entry2) -> bool) -> bool {
            for mut entry in cpuid.as_slice() {
                if entry.function == leaf && entry.index == index {
                    return f(&mut entry);
                }
            }

            false
        }

        match feature {
            Feature::XSave => {
                find_leaf(&self.supported_cpuid, 0x0000_0001, 0, |leaf| {
                    leaf.edx & CPUID_00000001_ECX_XSAVE != 0
                })
            }
            Feature::Pdpe1Gb => {
                find_leaf(&self.supported_cpuid, 0x8000_0001, 0, |leaf| {
                    leaf.edx & CPUID_80000001_EDX_PDPE1GB != 0
                })
            }
            Feature::StateSSE => {
                find_leaf(&self.supported_cpuid, 0x0000_000d, 0, |leaf| {
                    leaf.eax & CPUID_0000000D_EAX_SSE == CPUID_0000000D_EAX_SSE
                })
            }
            Feature::StateAVX => {
                find_leaf(&self.supported_cpuid, 0x0000_000d, 0, |leaf| {
                    leaf.eax & CPUID_0000000D_EAX_AVX == CPUID_0000000D_EAX_AVX
                })
            }
            Feature::StateAVX512 => {
                find_leaf(&self.supported_cpuid, 0x0000_000d, 0, |leaf| {
                    leaf.eax & CPUID_0000000D_EAX_AVX512 == CPUID_0000000D_EAX_AVX512
                })
            }
        }
    }

    /// set `feature` to `wanted` in the VM's CPUID configuration.
    ///
    /// panics if the feature cannot be configured (such as if the corresponding CPUID leaf is not
    /// available at all). use [`cpuid_supports`] to test if the feature can be configured.
    fn cpuid_set(&mut self, feature: Feature, wanted: bool) {
        fn edit_leaf(cpuid: &mut CpuId, leaf: u32, index: u32, mut f: impl FnMut(&mut kvm_cpuid_entry2)) {
            for mut entry in cpuid.as_mut_slice() {
                if entry.function == leaf && entry.index == index {
                    f(&mut entry);
                    return;
                }
            }

            // if we're here, the entry simply is not present (yet..?)
            //
            // so, create it.
            let mut entry = kvm_cpuid_entry2 {
                function: leaf,
                index: index,
                eax: 0,
                ecx: 0,
                edx: 0,
                ebx: 0,
                flags: 0,
                padding: [0; 3],
            };
            f(&mut entry);
            cpuid.push(entry).expect("can push");
        }

        fn bit_set(word: &mut u32, bit: u32, wanted: bool) {
            *word &= !bit;
            if wanted {
                *word |= bit;
            }
        }

        let mut edited = false;

        match feature {
            Feature::XSave => {
                edit_leaf(&mut self.current_cpuid, 0x0000_0001, 0, |leaf| {
                    bit_set(&mut leaf.ecx, CPUID_00000001_ECX_XSAVE, wanted);
                    edited = true;
                });
            },
            Feature::Pdpe1Gb => {
                edit_leaf(&mut self.current_cpuid, 0x8000_0001, 0, |leaf| {
                    bit_set(&mut leaf.edx, CPUID_80000001_EDX_PDPE1GB, wanted);
                    edited = true;
                });
            },
            Feature::StateSSE => {
                edit_leaf(&mut self.current_cpuid, 0x0000_000d, 0, |leaf| {
                    bit_set(&mut leaf.eax, 1, wanted);
                    bit_set(&mut leaf.eax, CPUID_0000000D_EAX_SSE, wanted);
                    edited = true;
                });
            }
            Feature::StateAVX => {
                edit_leaf(&mut self.current_cpuid, 0x0000_000d, 0, |leaf| {
                    bit_set(&mut leaf.eax, CPUID_0000000D_EAX_AVX, wanted);
                    edited = true;
                });
            }
            Feature::StateAVX512 => {
                edit_leaf(&mut self.current_cpuid, 0x0000_000d, 0, |leaf| {
                    bit_set(&mut leaf.eax, CPUID_0000000D_EAX_AVX512, wanted);
                    edited = true;
                });
            }
        }

        assert!(edited);

        self.vcpu.set_cpuid2(&self.current_cpuid).expect("can set cpuid");
    }

    /// configure page tables for identity mapping of all memory from guest address zero up to the
    /// end of added memory regions, rounded up to the next GiB.
    ///
    /// if `sregs` is provided, update `cr0`, `cr3`, and `cr4` in support of protected-mode or
    /// long-mode paging. this is a fixed pattern: if control registers have not been changed since
    /// `Vm::create` then there will be no change to these control registers and `sregs` can be
    /// omitted.
    ///
    /// panics if the end of added memory regions is above 512 GiB.
    pub unsafe fn configure_identity_paging(&mut self, sregs: Option<&mut kvm_sregs>) {
        // we're only setting up one PDPT, which can have up to 512 PDPTE covering 1G each.
        assert!(self.mem_ceiling() <= 512 * GB);

        assert!(self.cpuid_supports(Feature::Pdpe1Gb));
        self.cpuid_set(Feature::Pdpe1Gb, true);

        let pt = self.page_tables();

        let pml4_ent =
            1 << 0 | // P
            1 << 1 | // RW
            1 << 2 | // user access allowed. but no user code will run so not strictly needed.
            0 << 3 | // PWT (TODO: configure PAT explicitly, but PAT0 is sufficient)
            0 << 4 | // PCD (TODO: configure PAT explicitly, but PAT0 is sufficient)
            0 << 5 | // A
            0 << 6 | // ignored
            0 << 7 | // PS (reserved must-be-0)
            0 << 11 | // R (for ordinary paging, ignored; for HLAT ...)
            pt.pdpt_addr().0;
        unsafe {
            pt.pml4_mut().write(pml4_ent);
        }

        let mut mapped: u64 = 0;
        // we've set up the first PML4 to point to a PDPT, so we should actually set it up!
        let pdpt = pt.pdpt_mut();
        // PDPTEs start at the start of PDPT..
        let mut pdpte = pdpt;
        let entry_bits: u64 =
            1 << 0 | // P
            1 << 1 | // RW
            1 << 2 | // user accesses allowed (everything is under privilege level 0 tho)
            0 << 3 | // PWT (TODO: configure PAT explicitly, but PAT0 is sufficient)
            0 << 4 | // PCD (TODO: configure PAT explicitly, but PAT0 is sufficient)
            0 << 5 | // Accessed
            0 << 6 | // Dirty
            1 << 7 | // Page size (1 implies 1G page)
            1 << 8 | // Global (if cr4.pge)
            0 << 9 |
            0 << 10 |
            0 << 11 | // for ordinary paging, ignored. for HLAT, ...
            0 << 12; // PAT (TODO: configure explicitly, but PAT0 is sufficient. verify MTRR sets PAT0 to WB?)

        while mapped < self.mem_ceiling() {
            let phys_num = mapped >> 30;
            let entry = entry_bits | (phys_num << 30);
            unsafe {
                pdpte.write(entry);
                pdpte = pdpte.offset(1);
            }
            // eprintln!("mapped 1g at {:08x}", mapped);
            mapped += 1 << 30;
        }

        if let Some(sregs) = sregs {
            sregs.cr0 |= 0x8000_0001; // cr0.PE | cr0.PG
            sregs.cr3 = pt.pml4_addr().0 as u64;
            sregs.cr4 |= 1 << 5; // enable PAE
        }
    }

    unsafe fn configure_selectors(&mut self, sregs: &mut kvm_sregs) {
        // we have to set descriptor information directly. this avoids having to load selectors
        // as the first instructions on the vCPU, which is simplifying. but if we want the
        // information in these selectors to match with anything in a GDT (i do!) we'll have to
        // keep this initial state lined up with GDT entries ourselves.
        //
        // we could avoid setting up the GDT for the most part, but anything that might
        // legitimately load the "valid" current segment selector would instead clobber the
        // selector with zeroes.

        sregs.cs.base = 0;
        sregs.cs.limit = 0;
        sregs.cs.selector = self.selector_cs();
        sregs.cs.type_ = 0b1011; // see SDM table 3-1 Code- and Data-Segment Types
        sregs.cs.present = 1;
        sregs.cs.dpl = 0;
        sregs.cs.db = 0;
        sregs.cs.s = 1;
        sregs.cs.l = 1;
        sregs.cs.g = 0;
        sregs.cs.avl = 0;

        sregs.ds.base = 0;
        sregs.ds.limit = 0xffffffff;
        sregs.ds.selector = self.selector_ds();
        sregs.ds.type_ = 0b0011; // see SDM table 3-1 Code- and Data-Segment Types
        sregs.ds.present = 1;
        sregs.ds.dpl = 0;
        sregs.ds.db = 0;
        sregs.ds.s = 1;
        sregs.ds.l = 0;
        sregs.ds.g = 0;
        sregs.ds.avl = 0;

        sregs.es = sregs.ds;
        sregs.fs = sregs.ds;
        sregs.gs = sregs.ds;
        // linux populates the vmcb cpl field with whatever's in ss.dpl. what the hell???
        sregs.ss = sregs.ds;

        sregs.gdt.base = self.gdt_addr().0;
        sregs.gdt.limit = 256 * 8 - 1;

        unsafe {
            self.gdt_entry_mut(self.selector_cs() >> 3).write(encode_segment(&sregs.cs));
            self.gdt_entry_mut(self.selector_ds() >> 3).write(encode_segment(&sregs.ds));
        }
    }

    fn write_idt_entry(
        &mut self,
        intr_nr: u8,
        interrupt_handler_cs: u16,
        interrupt_handler_addr: GuestAddress
    ) {
        let idt_ptr = self.idt_entry_mut(intr_nr);

        // entries in the IDT, interrupt and trap descriptors (in the AMD APM, "interrupt-gate"
        // and "trap-gate" descriptors), are described (in the AMD APM) by
        // "Figure 4-24. Interrupt-Gate and Trap-Gate Descriptors—Long Mode". reproduced here:
        //
        //  3   2                 1        |          1                   0
        //  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6|5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
        // |---------------------------------------------------------------|
        // |                            res,ign                            | +12
        // |                      target offset[63:32]                     | +8
        // |     target offset[31:16]      |P|DPL|0| type  | res,ign | IST | +4
        // |     target selector           |    target offset[15:0]        | +0
        // |---------------------------------------------------------------|
        //
        // descriptors are encoded with P set, DPL at 0, and type set to 0b1110. TODO: frankly
        // i don't know the mechanical difference between type 0x0e and type 0x0f, but 0x0e
        // works for now.
        let idt_attr_bits = 0b1_00_0_1110_00000_000;
        let low_hi = (interrupt_handler_addr.0 as u32 & 0xffff_0000) | idt_attr_bits;
        let low_lo = (interrupt_handler_cs as u32) << 16 | (interrupt_handler_addr.0 as u32 & 0x0000_ffff);

        unsafe {
            idt_ptr.offset(0).write(low_lo);
            idt_ptr.offset(1).write(low_hi);
            idt_ptr.offset(2).write((interrupt_handler_addr.0 >> 32) as u32);
            idt_ptr.offset(3).write(0); // reserved
        }
    }

    fn configure_idt(&mut self, regs: &mut kvm_regs, sregs: &mut kvm_sregs) {
        sregs.idt.base = self.idt_addr().0;
        sregs.idt.limit = IDT_ENTRIES * 16 - 1; // IDT is 256 entries of 16 bytes each

        for i in 0..IDT_ENTRIES {
            let interrupt_handler_addr = GuestAddress(self.interrupt_handlers_start().0 + i as u64);
            self.write_idt_entry(
                i.try_into().expect("<u8::MAX interrupts"),
                self.selector_cs(),
                interrupt_handler_addr
            );
        }

        // all interrupt handlers are just `hlt`. their position is used to detect which
        // exception/interrupt occurred.
        unsafe {
            std::slice::from_raw_parts_mut(
                self.host_ptr(self.interrupt_handlers_start()),
                IDT_ENTRIES as usize
            ).fill(0xf4);
        }

        // finally, set `rsp` to a valid region so that the CPU can push necessary state (see
        // AMD APM section "8.9.3 Interrupt Stack Frame") to actually enter the interrupt
        // handler. if we didn't do this, rsp will probably be zero or something, underflow,
        // page fault on push to 0xffffffff_ffffffff, and just triple fault.
        //
        // TODO: this is our option in 16- and 32-bit modes, but in long mode all the interrupt
        // descriptors could set something in IST to switch stacks outright for exception
        // handling. this might be nice to test rsp permutations in 64-bit code? alternatively
        // we might just have to limit possible rsp permutations so as to be able to test in
        // 16- and 32-bit modes anyway.
        regs.rsp = self.stack_addr().0;
        self.idt_configured = true;
    }

    /// configure the vCPU for executing instructions in the hardware-supported extensions.
    /// on a fresh vCPU, various extension may be "supported" but result in `#UD` when executed,
    /// unless additional configuration is done (as this function does).
    ///
    /// the Intel SDM describes `INITIALIZING SSE/SSE2/SSE3/SSSE3 EXTENSIONS` but does not point
    /// out this `#UD` behavior so directly. the AMD APM does not seem to discuss it at all?
    ///
    /// this function configures the vCPU to be ready to execute `SSE*` instructions.
    fn configure_extensions(&mut self, sregs: &mut kvm_sregs, xcrs: &mut kvm_xcrs) {
        // these bit positions in control registers, and their behaviors, are described more
        // comprehensively in Voluem 3,
        // > `2.5 CONTROL REGISTERS`

        // CR0
        const TS: u32 = 3;
        // CR4
        const OSFXSR: u32 = 9;
        const OSXMMEXCPT: u32 = 10;
        const OSXSAVE: u32 = 18;

        // XCR0 (see "EXTENDED CONTROL REGISTERS (INCLUDING XCR0)")
        // these bits are the same as in cpuid leaf 0xd.eax
        const XCR0_SSE: u64 = CPUID_0000000D_EAX_SSE as u64;
        const XCR0_AVX: u64 = CPUID_0000000D_EAX_AVX as u64;
        const XCR0_AVX512: u64 = CPUID_0000000D_EAX_AVX512 as u64;

        // operations on `xmm` registers result in `#UD` even if CPUID says that SSE should be
        // quite functional. this is true even for SSE or SSE2 instructions on an `x86_64` system
        // (which makes SSE a non-optional baseline!)
        //
        // the Intel SDM implies this through somewhat tortured language in the section
        // "Checking for Intel® SSE and SSE2 Support":
        // > If an operating system did not provide adequate system level support for Intel
        // > SSE, executing an Intel SSE or SSE2 instructions can also generate #UD.
        //
        // to fully understand this statement, realize that `an operating system .. provide[s]
        // adequate system level support" by setting CR4.OSFXSR,
        //
        // > Set the OSFXSR flag (bit 9 in control register CR4) to indicate that the operating
        // > system supports saving and restoring the SSE/SSE2/SSE3/SSSE3 execution environment
        //
        // so OSFXSR is how "the operating system" indicates save/restore state, and must be set to
        // execute SSE (and later) SIMD instructions even if we never will use `fxsave` or even
        // switch tasks on the vCPU.
        sregs.cr4 |= 1 << OSFXSR;

        // there is a similar relationship between SIMD extension functionality and CR4.OSXSAVE.
        // this passage in the SDM under "XSAVE-SUPPORTED FEATURES AND STATE-COMPONENT BITMAPS"
        // draws a fairly direct connection:
        //
        // > As will be explained in Section 13.3, the XSAVE feature set is enabled only if
        // > CR4.OSXSAVE[bit 18] = 1. If CR4.OSXSAVE = 0, the processor treats XSAVE-enabled state
        // > features and their state components as if all bits in XCR0 were clear; the state
        // > components cannot be modified and the features’ instructions cannot be executed.
        //
        // but the consequence is contradicted by the next paragraph,
        //
        // > Processors allow modification of this state, as well as execution of x87 FPU
        // > instructions and SSE instructions [...] , regardless of the value of CR4.OSXSAVE and
        // > XCR0.
        //
        // we will see that CR4.OSXSAVE must be set for other SIMD extensions below, as well.
        sregs.cr4 |= 1 << OSXSAVE;

        // SSE3, SSSE3, and SSE4 involve a bit extra:
        // > Intel SSE3, SSSE3, and Intel SSE4 will cause a DNA Exception (#NM) if the processor
        // > attempts to execute an Intel SSE3 instruction while CR0.TS[bit 3] = 1
        sregs.cr0 &= !(1 << TS);

        // > Set the OSXMMEXCPT flag (bit 10 in control register CR4) to indicate that the operating
        // > system supports the handling of SSE/SSE2/SSE3 SIMD floating-point exceptions (#XM).
        //
        // this is somewhat better than just getting an uncategorized #UD.
        sregs.cr4 |= 1 << OSXMMEXCPT;

        assert!(xcrs.nr_xcrs > 0);
        assert_eq!(xcrs.xcrs[0].xcr, 0);

        let mut needs_xsave = false;
        if self.cpuid_supports(Feature::StateSSE) {
            self.cpuid_set(Feature::StateSSE, true);
            xcrs.xcrs[0].value |= 1;
            xcrs.xcrs[0].value |= XCR0_SSE;
            needs_xsave = true;
        }
        if self.cpuid_supports(Feature::StateAVX) {
            self.cpuid_set(Feature::StateAVX, true);
            xcrs.xcrs[0].value |= XCR0_AVX;
            needs_xsave = true;
        }
        if self.cpuid_supports(Feature::StateAVX512) {
            self.cpuid_set(Feature::StateAVX512, true);
            xcrs.xcrs[0].value |= XCR0_AVX512;
            needs_xsave = true;
        }

        if needs_xsave {
            if self.cpuid_supports(Feature::XSave) {
                self.cpuid_set(Feature::XSave, true);
            } else {
                panic!(
                    "look, there's no CPU that supports SSE but not xsave. \
                    i only checked to be thorough.");
            }
        }
    }
}