diff options
author | iximeow <me@iximeow.net> | 2019-03-14 15:51:15 -0700 |
---|---|---|
committer | iximeow <me@iximeow.net> | 2019-03-14 15:51:39 -0700 |
commit | 051a2e73d031475e08e37953007fbb7869515fb6 (patch) | |
tree | 7fa9ecddf5cba16c5f763a5ec1124933b5b9f962 /include/asi |
add ASI controls
Diffstat (limited to 'include/asi')
-rwxr-xr-x | include/asi/ASICamera2.h | 821 |
1 files changed, 821 insertions, 0 deletions
diff --git a/include/asi/ASICamera2.h b/include/asi/ASICamera2.h new file mode 100755 index 0000000..93a873c --- /dev/null +++ b/include/asi/ASICamera2.h @@ -0,0 +1,821 @@ +/**************************************************
+this is the second version of release ASI Camera ASIs
+any question feel free contact us:sam.wen@zwoptical.com
+
+here is the suggested procedure to operate the camera.
+
+--> ASIGetNumOfConnectedCameras
+----> ASIGetCameraProperty for each camera
+
+--> ASIOpenCamera
+--> ASIInitCamera
+--> ASIGetNumOfControls
+----> ASIGetControlCaps for each contronl and set or get value from them
+
+--> ASISetROIFormat
+
+--> ASISetCameraMode
+
+--> ASIStartVideoCapture
+
+//this is recommended to do in another thread
+while(1)
+{
+ ASIGetVideoData
+ ...
+}
+
+
+***************************************************/
+#ifndef ASICAMERA2_H
+#define ASICAMERA2_H
+
+
+
+
+#ifdef _WINDOWS
+ #define ASICAMERA_API __declspec(dllexport)
+#else
+ #define ASICAMERA_API
+#endif
+
+#define ASICAMERA_ID_MAX 128
+
+typedef enum ASI_BAYER_PATTERN{
+ ASI_BAYER_RG=0,
+ ASI_BAYER_BG,
+ ASI_BAYER_GR,
+ ASI_BAYER_GB
+}ASI_BAYER_PATTERN;
+
+typedef enum ASI_IMG_TYPE{ //Supported Video Format
+ ASI_IMG_RAW8 = 0,
+ ASI_IMG_RGB24,
+ ASI_IMG_RAW16,
+ ASI_IMG_Y8,
+ ASI_IMG_END = -1
+
+}ASI_IMG_TYPE;
+
+typedef enum ASI_GUIDE_DIRECTION{ //Guider Direction
+ ASI_GUIDE_NORTH=0,
+ ASI_GUIDE_SOUTH,
+ ASI_GUIDE_EAST,
+ ASI_GUIDE_WEST
+}ASI_GUIDE_DIRECTION;
+
+
+
+typedef enum ASI_FLIP_STATUS {
+ ASI_FLIP_NONE = 0,//: original
+ ASI_FLIP_HORIZ,//: horizontal flip
+ ASI_FLIP_VERT,// vertical flip
+ ASI_FLIP_BOTH,//:both horizontal and vertical flip
+
+}ASI_FLIP_STATUS;
+
+typedef enum ASI_CAMERA_MODE {
+ ASI_MODE_NORMAL = 0,
+ ASI_MODE_TRIG_SOFT_EDGE,
+ ASI_MODE_TRIG_RISE_EDGE,
+ ASI_MODE_TRIG_FALL_EDGE,
+ ASI_MODE_TRIG_SOFT_LEVEL,
+ ASI_MODE_TRIG_HIGH_LEVEL,
+ ASI_MODE_TRIG_LOW_LEVEL,
+ ASI_MODE_END = -1
+}ASI_CAMERA_MODE;
+
+typedef enum ASI_ERROR_CODE{ //ASI ERROR CODE
+ ASI_SUCCESS=0,
+ ASI_ERROR_INVALID_INDEX, //no camera connected or index value out of boundary
+ ASI_ERROR_INVALID_ID, //invalid ID
+ ASI_ERROR_INVALID_CONTROL_TYPE, //invalid control type
+ ASI_ERROR_CAMERA_CLOSED, //camera didn't open
+ ASI_ERROR_CAMERA_REMOVED, //failed to find the camera, maybe the camera has been removed
+ ASI_ERROR_INVALID_PATH, //cannot find the path of the file
+ ASI_ERROR_INVALID_FILEFORMAT,
+ ASI_ERROR_INVALID_SIZE, //wrong video format size
+ ASI_ERROR_INVALID_IMGTYPE, //unsupported image formate
+ ASI_ERROR_OUTOF_BOUNDARY, //the startpos is out of boundary
+ ASI_ERROR_TIMEOUT, //timeout
+ ASI_ERROR_INVALID_SEQUENCE,//stop capture first
+ ASI_ERROR_BUFFER_TOO_SMALL, //buffer size is not big enough
+ ASI_ERROR_VIDEO_MODE_ACTIVE,
+ ASI_ERROR_EXPOSURE_IN_PROGRESS,
+ ASI_ERROR_GENERAL_ERROR,//general error, eg: value is out of valid range
+ ASI_ERROR_INVALID_MODE,//the current mode is wrong
+ ASI_ERROR_END
+}ASI_ERROR_CODE;
+
+typedef enum ASI_BOOL{
+ ASI_FALSE =0,
+ ASI_TRUE
+}ASI_BOOL;
+
+typedef struct _ASI_CAMERA_INFO
+{
+ char Name[64]; //the name of the camera, you can display this to the UI
+ int CameraID; //this is used to control everything of the camera in other functions.Start from 0.
+ long MaxHeight; //the max height of the camera
+ long MaxWidth; //the max width of the camera
+
+ ASI_BOOL IsColorCam;
+ ASI_BAYER_PATTERN BayerPattern;
+
+ int SupportedBins[16]; //1 means bin1 which is supported by every camera, 2 means bin 2 etc.. 0 is the end of supported binning method
+ ASI_IMG_TYPE SupportedVideoFormat[8]; //this array will content with the support output format type.IMG_END is the end of supported video format
+
+ double PixelSize; //the pixel size of the camera, unit is um. such like 5.6um
+ ASI_BOOL MechanicalShutter;
+ ASI_BOOL ST4Port;
+ ASI_BOOL IsCoolerCam;
+ ASI_BOOL IsUSB3Host;
+ ASI_BOOL IsUSB3Camera;
+ float ElecPerADU;
+ int BitDepth;
+ ASI_BOOL IsTriggerCam;
+
+ char Unused[16];
+} ASI_CAMERA_INFO;
+
+#define ASI_BRIGHTNESS ASI_OFFSET
+#define ASI_AUTO_MAX_BRIGHTNESS ASI_AUTO_TARGET_BRIGHTNESS
+
+typedef enum ASI_CONTROL_TYPE{ //Control type//
+ ASI_GAIN = 0,
+ ASI_EXPOSURE,
+ ASI_GAMMA,
+ ASI_WB_R,
+ ASI_WB_B,
+ ASI_OFFSET,
+ ASI_BANDWIDTHOVERLOAD,
+ ASI_OVERCLOCK,
+ ASI_TEMPERATURE,// return 10*temperature
+ ASI_FLIP,
+ ASI_AUTO_MAX_GAIN,
+ ASI_AUTO_MAX_EXP,//micro second
+ ASI_AUTO_TARGET_BRIGHTNESS,//target brightness
+ ASI_HARDWARE_BIN,
+ ASI_HIGH_SPEED_MODE,
+ ASI_COOLER_POWER_PERC,
+ ASI_TARGET_TEMP,// not need *10
+ ASI_COOLER_ON,
+ ASI_MONO_BIN,//lead to less grid at software bin mode for color camera
+ ASI_FAN_ON,
+ ASI_PATTERN_ADJUST,
+ ASI_ANTI_DEW_HEATER,
+
+}ASI_CONTROL_TYPE;
+
+typedef struct _ASI_CONTROL_CAPS
+{
+ char Name[64]; //the name of the Control like Exposure, Gain etc..
+ char Description[128]; //description of this control
+ long MaxValue;
+ long MinValue;
+ long DefaultValue;
+ ASI_BOOL IsAutoSupported; //support auto set 1, don't support 0
+ ASI_BOOL IsWritable; //some control like temperature can only be read by some cameras
+ ASI_CONTROL_TYPE ControlType;//this is used to get value and set value of the control
+ char Unused[32];
+} ASI_CONTROL_CAPS;
+
+typedef enum ASI_EXPOSURE_STATUS {
+ ASI_EXP_IDLE = 0,//: idle states, you can start exposure now
+ ASI_EXP_WORKING,//: exposing
+ ASI_EXP_SUCCESS,//: exposure finished and waiting for download
+ ASI_EXP_FAILED,//:exposure failed, you need to start exposure again
+
+}ASI_EXPOSURE_STATUS;
+
+typedef struct _ASI_ID{
+ unsigned char id[8];
+}ASI_ID;
+
+typedef struct _ASI_SUPPORTED_MODE{
+ ASI_CAMERA_MODE SupportedCameraMode[16];// this array will content with the support camera mode type.ASI_MODE_END is the end of supported camera mode
+}ASI_SUPPORTED_MODE;
+
+#ifndef __cplusplus
+#define ASI_CONTROL_TYPE int
+#define ASI_BOOL int
+#define ASI_ERROR_CODE int
+#define ASI_FLIP_STATUS int
+#define ASI_IMG_TYPE int
+#define ASI_GUIDE_DIRECTION int
+#define ASI_BAYER_PATTERN int
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***************************************************************************
+Descriptions£º
+this should be the first API to be called
+get number of connected ASI cameras,
+
+Paras£º
+
+return£ºnumber of connected ASI cameras. 1 means 1 camera connected.
+***************************************************************************/
+ASICAMERA_API int ASIGetNumOfConnectedCameras();
+
+/***************************************************************************
+Descriptions:
+get the product ID of each supported camera, at first set pPIDs as 0 and get length and then malloc a buffer to contain the PIDs
+
+Paras:
+int* pPIDs: pointer to array of PIDs
+
+Return: length of the array.
+***************************************************************************/
+ASICAMERA_API int ASIGetProductIDs(int* pPIDs);
+
+/***************************************************************************
+Descriptions£º
+get the property of the connected cameras, you can do this without open the camera.
+here is the sample code:
+
+int iNumofConnectCameras = ASIGetNumOfConnectedCameras();
+ASI_CAMERA_INFO **ppASICameraInfo = (ASI_CAMERA_INFO **)malloc(sizeof(ASI_CAMERA_INFO *)*iNumofConnectCameras);
+for(int i = 0; i < iNumofConnectCameras; i++)
+{
+ppASICameraInfo[i] = (ASI_CAMERA_INFO *)malloc(sizeof(ASI_CAMERA_INFO ));
+ASIGetCameraProperty(ppASICameraInfo[i], i);
+}
+
+Paras£º
+ ASI_CAMERA_INFO *pASICameraInfo: Pointer to structure containing the property of camera
+ user need to malloc the buffer
+ int iCameraIndex: 0 means the first connect camera, 1 means the second connect camera
+
+return£º
+ ASI_SUCCESS: Operation is successful
+ ASI_ERROR_INVALID_INDEX :no camera connected or index value out of boundary
+
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIGetCameraProperty(ASI_CAMERA_INFO *pASICameraInfo, int iCameraIndex);
+
+/***************************************************************************
+Descriptions£º
+ open the camera before any operation to the camera, this will not affect the camera which is capturing
+ All APIs below need to open the camera at first.
+
+Paras£º
+ int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+
+return£º
+ASI_SUCCESS: Operation is successful
+ASI_ERROR_INVALID_ID : no camera of this ID is connected or ID value is out of boundary
+ASI_ERROR_CAMERA_REMOVED: failed to find the camera, maybe camera has been removed
+
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIOpenCamera(int iCameraID);
+
+/***************************************************************************
+Descriptions
+
+ Initialise the camera after open, this function may take some while, this will affect the camera which is capturing
+
+Paras£º
+ int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIInitCamera(int iCameraID);
+
+/***************************************************************************
+Descriptions£º
+you need to close the camera to free all the resource
+
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+
+return£º
+ASI_SUCCESS :it will return success even the camera already closed
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASICloseCamera(int iCameraID);
+
+
+
+
+/***************************************************************************
+Descriptions£º
+Get number of controls available for this camera. the camera need be opened at first.
+
+
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+int * piNumberOfControls: pointer to an int to save the number of controls
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIGetNumOfControls(int iCameraID, int * piNumberOfControls);
+
+
+/***************************************************************************
+Descriptions£º
+Get controls property available for this camera. the camera need be opened at first.
+user need to malloc and maintain the buffer.
+
+
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+int iControlIndex: index of control, NOT control type
+ASI_CONTROL_CAPS * pControlCaps: Pointer to structure containing the property of the control
+user need to malloc the buffer
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIGetControlCaps(int iCameraID, int iControlIndex, ASI_CONTROL_CAPS * pControlCaps);
+
+/***************************************************************************
+Descriptions£º
+Get controls property value and auto value
+note:the value of the temperature is the float value * 10 to convert it to long type, control name is "Temperature"
+because long is the only type for control(except cooler's target temperature, because it is an integer)
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+int ControlType: this is get from control property use the API ASIGetControlCaps
+long *plValue: pointer to the value you want to save the value get from control
+ASI_BOOL *pbAuto: pointer to the ASI_BOOL type
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+ASI_ERROR_INVALID_CONTROL_TYPE, //invalid Control type
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIGetControlValue(int iCameraID, ASI_CONTROL_TYPE ControlType, long *plValue, ASI_BOOL *pbAuto);
+
+/***************************************************************************
+Descriptions£º
+Set controls property value and auto value
+it will return success and set the max value or min value if the value is beyond the boundary
+
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+int ControlType: this is get from control property use the API ASIGetControlCaps
+long lValue: the value set to the control
+ASI_BOOL bAuto: set the control auto
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+ASI_ERROR_INVALID_CONTROL_TYPE, //invalid Control type
+ASI_ERROR_GENERAL_ERROR,//general error, eg: value is out of valid range; operate to camera hareware failed
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASISetControlValue(int iCameraID, ASI_CONTROL_TYPE ControlType, long lValue, ASI_BOOL bAuto);
+
+
+
+/***************************************************************************
+Descriptions£º
+set the ROI area before capture.
+you must stop capture before call it.
+the width and height is the value after binning.
+ie. you need to set width to 640 and height to 480 if you want to run at 640X480@BIN2
+ASI120's data size must be times of 1024 which means width*height%1024=0
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+int iWidth, the width of the ROI area. Make sure iWidth%8 = 0.
+int iHeight, the height of the ROI area. Make sure iHeight%2 = 0,
+further, for USB2.0 camera ASI120, please make sure that iWidth*iHeight%1024=0.
+int iBin, binning method. bin1=1, bin2=2
+ASI_IMG_TYPE Img_type: the output format you want
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+ASI_ERROR_INVALID_SIZE, //wrong video format size
+ASI_ERROR_INVALID_IMGTYPE, //unsupported image format, make sure iWidth and iHeight and binning is set correct
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASISetROIFormat(int iCameraID, int iWidth, int iHeight, int iBin, ASI_IMG_TYPE Img_type);
+
+
+/***************************************************************************
+Descriptions£º
+Get the current ROI area setting .
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+int *piWidth, pointer to the width of the ROI area
+int *piHeight, pointer to the height of the ROI area.
+int *piBin, pointer to binning method. bin1=1, bin2=2
+ASI_IMG_TYPE *pImg_type: pointer to the output format
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIGetROIFormat(int iCameraID, int *piWidth, int *piHeight, int *piBin, ASI_IMG_TYPE *pImg_type);
+
+
+/***************************************************************************
+Descriptions£º
+Set the start position of the ROI area.
+you can call this API to move the ROI area when video is streaming
+the camera will set the ROI area to the center of the full image as default
+at bin2 or bin3 mode, the position is relative to the image after binning
+
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+int iStartX, pointer to the start X
+int iStartY pointer to the start Y
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+ASI_ERROR_OUTOF_BOUNDARY: the start x and start y make the image out of boundary
+
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASISetStartPos(int iCameraID, int iStartX, int iStartY);
+
+/***************************************************************************
+Descriptions£º
+Get the start position of current ROI area .
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+int *piStartX, pointer to the start X
+int *piStartY pointer to the start Y
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIGetStartPos(int iCameraID, int *piStartX, int *piStartY);
+
+/***************************************************************************
+Descriptions£º
+Get the droped frames .
+drop frames happen when USB is traffic or harddisk write speed is slow
+it will reset to 0 after stop capture
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+int *piDropFrames pointer to drop frames
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIGetDroppedFrames(int iCameraID,int *piDropFrames);
+
+/***************************************************************************
+Descriptions£º
+provide a dark file's path to the function and enable dark subtract
+this is used when there is hot pixel or need to do long exposure
+you'd better make this dark file from the "dark subtract" funtion
+of the "video capture filter" directshow page.
+the dark file's size should be the same of camera's max width and height
+and should be RGB8 raw format.it will on even you changed the ROI setting
+it only correct the hot pixels if out put isn't 16bit.
+
+it will be remembered in registry. so "Dark subtract" is on next time if you close your app.
+
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+char *pcBMPPath: the path to the bmp dark file.
+return£º
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_PATH, //cannot find the path of the file
+ASI_ERROR_INVALID_FILEFORMAT, //the dark file's size should be the same of camera's max width and height
+
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIEnableDarkSubtract(int iCameraID, char *pcBMPPath);
+
+/***************************************************************************
+Descriptions£º
+Disable the dark subtract function.
+you'd better call it at start if you don't want to use it.
+because dark subtract function is remembered on windows platform
+
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIDisableDarkSubtract(int iCameraID);
+
+/***************************************************************************
+Descriptions£º
+Start video capture
+then you can get the data from the API ASIGetVideoData
+
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+
+return:
+ASI_SUCCESS : Operation is successful, it will return success if already started
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+ASI_ERROR_EXPOSURE_IN_PROGRESS: snap mode is working, you need to stop snap first
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIStartVideoCapture(int iCameraID);
+
+/***************************************************************************
+Descriptions£º
+Stop video capture
+
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+
+return:
+ASI_SUCCESS : Operation is successful, it will return success if already stopped
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIStopVideoCapture(int iCameraID);
+
+/***************************************************************************
+Descriptions£º
+get data from the video buffer.the buffer is very small
+you need to call this API as fast as possible, otherwise frame will be discarded
+so the best way is maintain one buffer loop and call this API in a loop
+please make sure the buffer size is biger enough to hold one image
+otherwise the this API will crash
+
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+unsigned char* pBuffer, caller need to malloc the buffer, make sure the size is big enough
+ the size in byte:
+ 8bit mono:width*height
+ 16bit mono:width*height*2
+ RGB24:width*height*3
+
+int iWaitms, this API will block and wait iWaitms to get one image. the unit is ms
+ -1 means wait forever. this value is recommend set to exposure*2+500ms
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+ASI_ERROR_TIMEOUT: no image get and timeout
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIGetVideoData(int iCameraID, unsigned char* pBuffer, long lBuffSize, int iWaitms);
+
+
+/***************************************************************************
+Descriptions£º
+PulseGuide of the ST4 port on. this function only work on the module which have ST4 port
+
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+ASI_GUIDE_DIRECTION direction the direction of guider
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIPulseGuideOn(int iCameraID, ASI_GUIDE_DIRECTION direction);
+
+/***************************************************************************
+Descriptions£º
+PulseGuide of the ST4 port off. this function only work on the module which have ST4 port
+make sure where is ASIPulseGuideOn and there is ASIPulseGuideOff
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+ASI_GUIDE_DIRECTION direction the direction of guider
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIPulseGuideOff(int iCameraID, ASI_GUIDE_DIRECTION direction);
+
+
+/***************************************************************************
+Descriptions£º
+Start camera exposure. the following 4 API is usually used when long exposure required
+start exposure and check the exposure status then get the data
+
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+ASI_BOOL bIsDark: means dark frame if there is mechanical shutter on the camera. otherwise useless
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+ASI_ERROR_VIDEO_MODE_ACTIVE: video mode is working, you need to stop video capture first
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIStartExposure(int iCameraID, ASI_BOOL bIsDark);
+
+/***************************************************************************
+Descriptions£º
+to cancel the long exposure which is on.
+
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIStopExposure(int iCameraID);
+
+/***************************************************************************
+Descriptions£º
+to get the exposure status, work with ASIStartExposure.
+you can read the data if get ASI_EXP_SUCCESS. or have to restart exposure again
+if get ASI_EXP_FAILED
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+ASI_EXPOSURE_STATUS *pExpStatus: the exposure status
+
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+
+***************************************************************************/
+
+ASICAMERA_API ASI_ERROR_CODE ASIGetExpStatus(int iCameraID, ASI_EXPOSURE_STATUS *pExpStatus);
+
+/***************************************************************************
+Descriptions£º
+get data after exposure.
+please make sure the buffer size is biger enough to hold one image
+otherwise the this API will crash
+
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+unsigned char* pBuffer, caller need to malloc the buffer, make sure the size is big enough
+the size in byte:
+8bit mono:width*height
+16bit mono:width*height*2
+RGB24:width*height*3
+
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+ASI_ERROR_TIMEOUT: no image get and timeout
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIGetDataAfterExp(int iCameraID, unsigned char* pBuffer, long lBuffSize);
+
+/***************************************************************************
+Descriptions£º
+get camera id stored in flash, only available for USB3.0 camera
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+ASI_ID* pID: pointer to ID
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIGetID(int iCameraID, ASI_ID* pID);
+
+/***************************************************************************
+Descriptions£º
+write camera id to flash, only available for USB3.0 camera
+
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+ASI_ID ID: ID
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASISetID(int iCameraID, ASI_ID ID);
+
+/***************************************************************************
+Descriptions£º
+get pre-setting parameter
+Paras£º
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+Offset_HighestDR: offset at highest dynamic range,
+Offset_UnityGain: offset at unity gain
+int *Gain_LowestRN, *Offset_LowestRN: gain and offset at lowest read noise
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIGetGainOffset(int iCameraID, int *pOffset_HighestDR, int *pOffset_UnityGain, int *pGain_LowestRN, int *pOffset_LowestRN);
+
+/***************************************************************************
+Descriptions£º
+get version string, like "1, 13, 0503"
+***************************************************************************/
+ASICAMERA_API char* ASIGetSDKVersion();
+
+/***************************************************************************
+Description:
+Get the camera supported mode, only need to call when the IsTriggerCam in the CameraInfo is true.
+Paras:
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+ASI_SUPPORTED_MODE: the camera supported mode
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIGetCameraSupportMode(int iCameraID, ASI_SUPPORTED_MODE* pSupportedMode);
+
+/***************************************************************************
+Description:
+Get the camera current mode, only need to call when the IsTriggerCam in the CameraInfo is true
+Paras:
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+ASI_CAMERA_MODE: the current camera mode
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_ID :no camera of this ID is connected or ID value is out of boundary
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASIGetCameraMode(int iCameraID, ASI_CAMERA_MODE* mode);
+
+/***************************************************************************
+Description:
+Set the camera mode, only need to call when the IsTriggerCam in the CameraInfo is true
+Paras:
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+ASI_CAMERA_MODE: this is get from the camera property use the API ASIGetCameraProperty
+
+return:
+ASI_SUCCESS : Operation is successful
+ASI_ERROR_CAMERA_CLOSED : camera didn't open
+ASI_ERROR_INVALID_SEQUENCE : camera is in capture now, need to stop capture first.
+ASI_ERROR_INVALID_MODE : mode is out of boundary or this camera do not support this mode
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASISetCameraMode(int iCameraID, ASI_CAMERA_MODE mode);
+
+/***************************************************************************
+Description:
+Send out a softTrigger. For edge trigger, it only need to set true which means send a
+rising trigger to start exposure. For level trigger, it need to set true first means
+start exposure, and set false means stop exposure.it only need to call when the
+IsTriggerCam in the CameraInfo is true
+Paras:
+int CameraID: this is get from the camera property use the API ASIGetCameraProperty
+ASI_BOOL starts:send a softTrigger start/stop signal
+***************************************************************************/
+ASICAMERA_API ASI_ERROR_CODE ASISendSoftTrigger(int iCameraID, ASI_BOOL bStart);
+#ifdef __cplusplus
+}
+#endif
+
+#endif
|