diff options
Diffstat (limited to 'source/blog/yax/avnera')
| -rw-r--r-- | source/blog/yax/avnera/notes.md | 1298 |
1 files changed, 678 insertions, 620 deletions
diff --git a/source/blog/yax/avnera/notes.md b/source/blog/yax/avnera/notes.md index a5797eb..a338a7b 100644 --- a/source/blog/yax/avnera/notes.md +++ b/source/blog/yax/avnera/notes.md @@ -1,16 +1,16 @@ cpu instruction sets are one of my special interests. whitequark posted about a weird instruction set. so of course i asked for a copy of the binary. it indulged me! it's called `noes`, who knows why. -``` +<pre class="codebox"> > ls -al noes -rw-rw-r-- 1 iximeow iximeow 12935 May 23 18:12 noes -``` +</pre> so, 12.6KiB of some firmware for a headset or something, and an otherwise unknown instruction set. this is catnip, to me. and so here is where i started: -``` +<pre class="codebox"> 00000000 BC 60 BB 68 E4 E3 E5 ED E2 8F E3 01 28 42 99 03 43 91 05 D4 C4 BC 69 BB .`.h........(B..C.....i. 00000018 BC 26 BE E0 04 C8 41 F0 E0 44 C8 40 F0 E0 BB C8 51 F0 E0 94 C8 50 F0 EC .&....A..D.@....Q....P.. 00000030 E3 ED BF D8 0E BC E0 05 BF D0 0E C8 E3 ED CC 19 B9 E0 04 C8 41 F0 E0 64 ....................A..d @@ -18,7 +18,7 @@ and so here is where i started: 00000060 E0 BC C8 42 F0 E0 BB C8 53 F0 E0 D3 C8 52 F0 E4 01 BF 90 75 BC E9 72 E8 ...B....S....R.....u..r. 00000078 99 B7 90 03 BC E9 72 E2 1C E3 00 E0 72 C8 43 F0 E0 E7 C8 42 F0 E0 BB C8 ......r.....r.C....B.... 00000090 53 F0 E0 B4 C8 52 F0 BC C0 72 E0 13 C8 20 B5 E0 EC C8 1F B5 BC 59 40 E1 S....R...r... .......Y@. -000000A8 08 E8 48 B6 79 90 0A 28 C8 4C B6 C8 4B B6 BC 3C 6B E8 48 B6 90 07 C8 4C ..H.y..(.L..K..<k.H....L +000000A8 08 E8 48 B6 79 90 0A 28 C8 4C B6 C8 4B B6 BC 3C 6B E8 48 B6 90 07 C8 4C ..H.y..(.L..K..<k.H....L 000000C0 B6 28 C8 4B B6 BC BD 6B BC E4 61 E0 12 7A 28 4B 99 04 E0 12 90 07 14 71 .(.K...k..a..z(K.......q 000000D8 E8 41 B5 59 49 C8 41 B5 E1 00 C9 42 B5 00 00 BC A2 57 BF D0 0E C8 C2 B9 .A.YI.A....B.....W...... 000000F0 CC C1 B9 CA C3 B9 E8 F9 B4 22 98 03 BC 2D 33 BC DA 32 86 12 76 E8 0B B4 ........."...-3..2..v... @@ -39,7 +39,7 @@ and so here is where i started: 00000258 E0 17 C8 4F F0 E0 53 C8 4E F0 E0 BC C8 5F F0 E0 5E C8 5E F0 E1 80 12 19 ...O..S.N...._..^.^..... 00000270 72 CA 60 F0 E2 00 E0 2E C8 21 F0 E0 1C C8 20 F0 E0 BC C8 31 F0 E0 AF C8 r.`......!.... ....1.... 00000288 30 F0 E1 01 12 19 72 E0 A7 C8 25 F0 E0 66 C8 24 F0 E0 A7 C8 35 F0 E0 7E 0.....r...%..f.$....5..~ -``` +</pre> i also often think about [this lovely writeup](https://www.robertxiao.ca/hacking/dsctf-2019-cpu-adventure-unknown-cpu-reversing/) from Robert Xiao on a similar problem presented as a Dragon CTF teaser challenge a few years ago. working from an unknown data encoding all the way out to an instruction set and high level behavior is certainly _possible_, but it's not an opportunity that comes up often. it sounds fun! so i decided to chew on `noes` with as little context as i could have - the opportunity doesn't come up too often! @@ -50,7 +50,7 @@ even just at the bottom of this first window it's clear there's some kind of str so there's some structure, the file is kind of tiny, the file is notionally a firmware for a processor, so presumably the processor also is kind of tiny. the bytes here are not obviously an 8080/6502/etc. probably not a tiny ARM core, because the repetition at the end of the above is offset by 1: this processor must be OK with instructions at odd addresses. scrolling through the file for anything else interesting and this stands out: -``` +<pre class="codebox"> 00001358 B9 80 81 82 83 84 85 E8 E6 B0 80 E8 E7 B0 80 E8 E8 B0 80 E8 E9 B0 80 E8 ........................ 00001370 EA B0 80 E8 EB B0 80 E8 EC B0 80 E8 ED B0 80 E8 EE B0 80 E8 EF B0 80 E8 ........................ 00001388 F0 B0 80 86 87 E1 03 E8 59 F3 21 98 3D BF 8E 31 BC 2E CF 80 81 82 83 84 ........Y.!.=..1........ @@ -59,20 +59,20 @@ scrolling through the file for anything else interesting and this stands out: 000013D0 CD DF 8F 8E 88 C8 F0 B0 88 C8 EF B0 88 C8 EE B0 88 C8 ED B0 88 C8 EC B0 ........................ 000013E8 88 C8 EB B0 88 C8 EA B0 88 C8 E9 B0 88 C8 E8 B0 88 C8 E7 B0 88 C8 E6 B0 ........................ 00001400 8D 8C 8B 8A 89 88 BA E8 F3 B4 C8 5C ED E8 F2 B4 C8 5B ED B9 E0 03 C8 0D ...........\.....[...... -``` +</pre> this is different, which makes it interesting! this is a long span of bytes with very few ascii bytes, unlike the rest of the file which has a more frequent mix of bytes in `[0, 255]`. the content starts with an increasing series, `80 81 82 83 84 85 E8 E6 B0 80 E8 E7 B0 80 ...`, and towards the end has `8D 8C 8B 8A 89 88`. this might be data? maybe a lookup table? there are other regions of clear structure, like: -``` +<pre class="codebox"> 00002478 6A F1 ED 6B F1 12 E9 6C F1 21 72 13 E9 6D F1 21 73 14 E9 6E F1 21 74 15 j..k...l.!r..m.!s..n.!t. 00002490 E9 6F F1 21 75 12 E9 25 EE 21 72 13 E9 26 EE 21 73 14 E9 27 EE 21 74 15 .o.!u..%.!r..&.!s..'.!t. 000024A8 E9 28 EE 21 75 CA 68 F1 CB 69 F1 CC 6A F1 CD 6B F1 12 1B 1C 1D 98 07 E4 .(.!u.h..i..j..k........ -``` +</pre> but what does `21 72 13 E9` mean? or `21 73 14 E9`? `21 74 15 E9`? maybe four-byte instructions with different operands? ok. time to break out the big tools. -``` +<pre class="codebox"> # iximeow> xxd -ps noes | head -n 20 bc60bb68e4e3e5ede28fe30128429903439105d4c4bc69bbbc26bee004c8 41f0e044c840f0e0bbc851f0e094c850f0ece3edbfd80ebce005bfd00ec8 @@ -94,23 +94,23 @@ e050c844f0e0bbc855f0e0f6c854f0e104121972e06ac847f0e05ec846f0 e0bcc857f0e003c856f0e108121972e061c849f0e0e1c848f0e0bcc859f0 e024c858f0e110121972e057c84bf0e089c84af0e0bcc85bf0e027c85af0 e120121972e032c84df0e0c8c84cf0e0bcc85df0e046c85cf0e140121972 -``` +</pre> more structure to this, highlighting helps.. -``` -308eb9e200e004<div class=yellow>c8</div>41f0e044<div class=yellow>c8</div>40f0e0bb<div class=yellow>c8</div>51f0e094<div class=yellow>c8</div>50f0e101121972 -e072<div class=yellow>c8</div>43f0e0bc<div class=yellow>c8</div>42f0e0bb<div class=yellow>c8</div>53f0e0d3<div class=yellow>c8</div>52f0e102121972e040<div class=yellow>c8</div>45f0 -e050<div class=yellow>c8</div>44f0e0bb<div class=yellow>c8</div>55f0e0f6<div class=yellow>c8</div>54f0e104121972e06a<div class=yellow>c8</div>47f0e05e<div class=yellow>c8</div>46f0 -e0bc<div class=yellow>c8</div>57f0e003<div class=yellow>c8</div>56f0e108121972e061<div class=yellow>c8</div>49f0e0e1<div class=yellow>c8</div>48f0e0bc<div class=yellow>c8</div>59f0 -e024<div class=yellow>c8</div>58f0e110121972e057<div class=yellow>c8</div>4bf0e089<div class=yellow>c8</div>4af0e0bc<div class=yellow>c8</div>5bf0e027<div class=yellow>c8</div>5af0 -e120121972e032<div class=yellow>c8</div>4df0e0<div class=yellow>c8</div><div class=yellow>c8</div>4cf0e0bc<div class=yellow>c8</div>5df0e046<div class=yellow>c8</div>5cf0e140121972 -``` +<pre class="codebox"> +308eb9e200e004<span class=yellow>c8</span>41f0e044<span class=yellow>c8</span>40f0e0bb<span class=yellow>c8</span>51f0e094<span class=yellow>c8</span>50f0e101121972 +e072<span class=yellow>c8</span>43f0e0bc<span class=yellow>c8</span>42f0e0bb<span class=yellow>c8</span>53f0e0d3<span class=yellow>c8</span>52f0e102121972e040<span class=yellow>c8</span>45f0 +e050<span class=yellow>c8</span>44f0e0bb<span class=yellow>c8</span>55f0e0f6<span class=yellow>c8</span>54f0e104121972e06a<span class=yellow>c8</span>47f0e05e<span class=yellow>c8</span>46f0 +e0bc<span class=yellow>c8</span>57f0e003<span class=yellow>c8</span>56f0e108121972e061<span class=yellow>c8</span>49f0e0e1<span class=yellow>c8</span>48f0e0bc<span class=yellow>c8</span>59f0 +e024<span class=yellow>c8</span>58f0e110121972e057<span class=yellow>c8</span>4bf0e089<span class=yellow>c8</span>4af0e0bc<span class=yellow>c8</span>5bf0e027<span class=yellow>c8</span>5af0 +e120121972e032<span class=yellow>c8</span>4df0e0<span class=yellow>c8</span><span class=yellow>c8</span>4cf0e0bc<span class=yellow>c8</span>5df0e046<span class=yellow>c8</span>5cf0e140121972 +</pre> if `c8` marks the start of some instruction or sequence, the those sequences are something like: -``` +<pre class="codebox"> c841f0e044 c840f0e0bb c851f0e094 c850f0e101 ... ... c843f0e0bc c842f0e0bb c853f0e0d3 c852f0e1 ... -``` +</pre> and so seeing `41f0`, `40f0`, `51f0`, `50f0`, `43f0`, `42f0`, `53f0`, `52f0`, and others like it, immediately suggests something little-endian is happening. those might be offsets for a memory access? `e044`, `e0bb`, etc could be other immediates or operand selectors. maybe `c8` is an opcode itself? @@ -119,43 +119,43 @@ this is a great start: there's some kind of structure, something that looks like ### one instruction, to many instructions if i were stumped at this point i'd have started looking for common byte sequences, working through a list to guess what might be function prologues or epilogues, and go from there. but, being neither stumped nor interested in switching away from the next most advanced tool i have on hand - `xxd -ps noes | vim -` - i stuck with eyeballing common bytes. `8e` stuck out: -``` -75bffce2fe0671fe0272fe0373f219d2<div class=yellow>8e</div>8fb98786ca56ef147615771674 -1775bffce2ea56eff674bfe444<div class=yellow>8e</div>8fb9878628c857eec856eee412bf14e9 -761177e010de03e20016741775bf5f05<div class=yellow>8e</div>8fb9e<div class=yellow>8e</div>9ed9803bccfe2e85aee -e95bee19982de855eec84befc94defe85aeec84cefe26<div class=yellow>8e</div>3eee461e5eebf +<pre class="codebox"> +75bffce2fe0671fe0272fe0373f219d2<span class=yellow>8e</span>8fb98786ca56ef147615771674 +1775bffce2ea56eff674bfe444<span class=yellow>8e</span>8fb9878628c857eec856eee412bf14e9 +761177e010de03e20016741775bf5f05<span class=yellow>8e</span>8fb9e<span class=yellow>8e</span>9ed9803bccfe2e85aee +e95bee19982de855eec84befc94defe85aeec84cefe26<span class=yellow>8e</span>3eee461e5eebf dfe3ea5aeeeb5beefa079026c85beec85aeebcc0e3e854eec84befe859ee -c84defe85<div class=yellow>8e</div>ec84cefe26<div class=yellow>8e</div>3eee461e5eebfdfe3e001c84befe85deec84d -``` +c84defe85<span class=yellow>8e</span>ec84cefe26<span class=yellow>8e</span>3eee461e5eebfdfe3e001c84befe85deec84d +</pre> and in fact the longer common sequences are `8e8fb98786`: -``` -75bffce2fe0671fe0272fe0373f219d2<div class=yellow>8e8fb98786</div>ca56ef147615771674 -1775bffce2ea56eff674bfe444<div class=yellow>8e8fb98786</div>28c857eec856eee412bf14e9 +<pre class="codebox"> +75bffce2fe0671fe0272fe0373f219d2<span class=yellow>8e8fb98786</span>ca56ef147615771674 +1775bffce2ea56eff674bfe444<span class=yellow>8e8fb98786</span>28c857eec856eee412bf14e9 761177e010de03e20016741775bf5f058e8fb9e8e9ed9803bccfe2e85aee e95bee19982de855eec84befc94defe85aeec84cefe268e3eee461e5eebf dfe3ea5aeeeb5beefa079026c85beec85aeebcc0e3e854eec84befe859ee c84defe858eec84cefe268e3eee461e5eebfdfe3e001c84befe85deec84d -``` +</pre> this shows up across the file, but `8786` is only sometimes present. so maybe this is the epilogue of one function, and the prologue of the next? in which case the epilogue would be `8e8fb9` and the prologue is `8786`. then `b9` is `ret`? `8e8f` and `8786` are `pop` and `push` respectively? lets see if that gives us reasonably-sized functions. as some examples: -``` -... <div class=yellow>8e8fb9</div> +<pre class="codebox"> +... <span class=yellow>8e8fb9</span> -8786cae5eecce6eee412bf14e9761177e8e6eede03e8e5eede04e20016741775bf5f05<div class=yellow>8e8fb9</div> +8786cae5eecce6eee412bf14e9761177e8e6eede03e8e5eede04e20016741775bf5f05<span class=yellow>8e8fb9</span> e200e45390d4b9e4f5e5edbf82c3e0d4c85cefe0e8c85bef28c85eefe003 [ 210 bytes ] -bf2bd7<div class=yellow>8e8fb9</div> +bf2bd7<span class=yellow>8e8fb9</span> e500e406e260e3ed14e1005272110b73f27215527504e118 [ 240 bytes ] -19e0f2c8ecee177116c0c9eeeec8edeee1fff65172e412bf4bd4<div class=yellow>8e8fb9</div> +19e0f2c8ecee177116c0c9eeeec8edeee1fff65172e412bf4bd4<span class=yellow>8e8fb9</span> cc86f2cd87f2e004c882f2b928c855f3e01ac854f3e1fee850f321c850f3e0 [ 420 bytes ] -75bf8cdaea0aef02ca0aefe19912799181<div class=yellow>8e8fb9</div> -``` +75bf8cdaea0aef02ca0aefe19912799181<span class=yellow>8e8fb9</span> +</pre> nothing huge, seems like a workable assumption. ### a virtuous cycle @@ -163,129 +163,129 @@ nothing huge, seems like a workable assumption. with a guess of function prologues ane epilogues, i can guess at the instructions around the entry/exit of these "theoriezed functions". some more looking around, `c8` is pretty common and seems to be followed by two bytes that might be an address? -``` -52e8ec76edbfdee6e876ed9805e401bc52e8b928<div class=yellow>c8</div><div class=green>06ee</div><div class=yellow>c8</div><div class=green>05ee</div><div class=yellow>c8</div>47eee8 -03f3619016e003<div class=yellow>c8</div><div class=green>4bee</div>e001<div class=yellow>c8</div><div class=green>4aee</div>e140e8a3f919<div class=yellow>c8</div>a3f9bc3b60e102e8 -4aee799026e003<div class=yellow>c8</div>4beee8eded9805e008<div class=yellow>c8</div><div class=green>03f3</div>e008<div class=yellow>c8</div>8cf971e898f919 -<div class=yellow>c8</div>98f9e1bfe8a3f921<div class=yellow>c8</div>a3f9b9e010<div class=yellow>c8</div><div class=green>03f3</div>bf9f5ce108e898f919<div class=yellow>c8</div>98f9 -e1bfe8a3f921<div class=yellow>c8</div>a3f9e001<div class=yellow>c8</div>46eeb98786e101e847ee79902c28<div class=yellow>c8</div>47eee4 -05e5eebf82c3e0<div class=yellow>c8</div><div class=yellow>c8</div>52b9e071<div class=yellow>c8</div>51b9e001<div class=yellow>c8</div>54b9e0f4<div class=yellow>c8</div>53b9e201e400 -bf9513c906ee<div class=yellow>c8</div>05eee102e8e6ed799003bf2dc2e2cce342e85bede95ced -``` +<pre class="codebox"> +52e8ec76edbfdee6e876ed9805e401bc52e8b928<span style="background-color: "background-color: yellow;";">c8</span><span style=green>06ee</span><span class=yellow>c8</span><span style=green>05ee</span><span class=yellow>c8</span>47eee8 +03f3619016e003<span class=yellow>c8</span><span style=green>4bee</span>e001<span class=yellow>c8</span><span style=green>4aee</span>e140e8a3f919<span class=yellow>c8</span>a3f9bc3b60e102e8 +4aee799026e003<span class=yellow>c8</span>4beee8eded9805e008<span class=yellow>c8</span><span style=green>03f3</span>e008<span class=yellow>c8</span>8cf971e898f919 +<span class=yellow>c8</span>98f9e1bfe8a3f921<span class=yellow>c8</span>a3f9b9e010<span class=yellow>c8</span><span style=green>03f3</span>bf9f5ce108e898f919<span class=yellow>c8</span>98f9 +e1bfe8a3f921<span class=yellow>c8</span>a3f9e001<span class=yellow>c8</span>46eeb98786e101e847ee79902c28<span class=yellow>c8</span>47eee4 +05e5eebf82c3e0<span class=yellow>c8</span><span class=yellow>c8</span>52b9e071<span class=yellow>c8</span>51b9e001<span class=yellow>c8</span>54b9e0f4<span class=yellow>c8</span>53b9e201e400 +bf9513c906ee<span class=yellow>c8</span>05eee102e8e6ed799003bf2dc2e2cce342e85bede95ced +</pre> there are definitely other `c8`s here that don't make sense yet, but `06ee .. 05ee` and `4bee .. 4aee` look like sequential addresses, and `03f3` shows up a few times which suggests these addresses are probably absolute. in-between there are several `e0` followed by a relatively low byte, `e001` between two `c8` sequences, `e008`, `e010`, an `e071` once. the second byte might be an immediate, maybe an offset? the values tend towards bitmasks, for whatever reason. this also happens with `e1` and an `e2` in the same region: -``` +<pre class="codebox"> 52e8ec76edbfdee6e876ed9805e401bc52e8b928c806eec805eec847eee8 03f3619016e003c84beee001c84aeee140e8a3f919c8a3f9bc3b60e102e8 4aee799026e003c84beee8eded9805e008c803f3e008c88cf971e898f919 c898f9e1bfe8a3f921c8a3f9b9e010c803f3bf9f5ce108e898f919c898f9 e1bfe8a3f921c8a3f9e001c846eeb98786e101e847ee79902c28c847eee4 -05e5eebf82c3e0c8c852b9e071c851b9e001c854b9e0f4c853b9<div class=yellow>e201</div>e400 -bf9513c906eec805eee102e8e6ed799003bf2dc2<div class=green>e2cc</div>e342e85bede95ced -``` +05e5eebf82c3e0c8c852b9e071c851b9e001c854b9e0f4c853b9<span class=yellow>e201</span>e400 +bf9513c906eec805eee102e8e6ed799003bf2dc2<span class=green>e2cc</span>e342e85bede95ced +</pre> so maybe `eX` is a whole range of instructions with one-byte immediates? with this, lets see how a hypothesized function breaks apart.. -``` +<pre class="codebox"> 87 86 14761577f698 19e0f2 c8ecee 177116c0 c9eeee c8edee e1ff f65172 e412 bf4bd4 8e 8f b9 -``` +</pre> 7X is another one-byte instruction maybe? 1X too? calling `86` "push A" and `87` "push B", similarly with `8e 8f`, that gives us: -``` -87 86 ; push B; push A +<pre class="codebox"> +87 86 <span class=blue>; push B; push A</span> 14 76 15 77 f698 19e0f2 c8ecee 17 71 16 c0 c9eeee c8edee e1ff f651 72 e412 bf4bd4 -8e 8f b9 ; pop A; pop B; ret -``` +8e 8f b9 <span class=blue>; pop A; pop B; ret</span> +</pre> -checking that other blocks seem to break apart reasonably as "functions", this is how vim started looking. knowing `c8XXXX` is an instruction in turn makes other instructions more clear: -``` +checking that other blocks seem to break apart reasonably as "functions", this is how vim starts to look. knowing `c8XXXX` is an instruction in turn makes other instructions more clear: +<pre class="codebox"> 87 86 -28 c809ef 72 e461 e5ee bf29e3 ; 28 looks like something, 72 looks like something, bf<rel16>? -e200 e468 e5ee bf29e3 bf2ae0 bffedc ; bf<rel16>? +28 c809ef 72 e461 e5ee bf29e3 <span class=blue>; 28 looks like something, 72 looks like something, bf<rel16>?</span> +e200 e468 e5ee bf29e3 bf2ae0 bffedc <span class=blue>; bf<rel16>?</span> 28 76 77 e84cee e94dee e201a -6939384290fac923f5c822f5e101e826f519c826f5c981f1e850f1649806 ; dunno about these -28c878ed9818e803f3619807e001c809ef900bc6e1081679e107174991bc ; dunno about these -bf4fdde826f56090fabf33e1e0072f9008e0082e9003bf2dc2e809ef9803 ; dunno about these +6939384290fac923f5c822f5e101e826f519c826f5c981f1e850f1649806 <span class=blue>; dunno about these</span> +28c878ed9818e803f3619807e001c809ef900bc6e1081679e107174991bc <span class=blue>; dunno about these</span> +bf4fdde826f56090fabf33e1e0072f9008e0082e9003bf2dc2e809ef9803 <span class=blue>; dunno about these</span> bf2bd7 -8e 8f b9 ; but an epilogue -``` +8e 8f b9 <span class=blue>; but an epilogue</span> +</pre> lots that would be too early to guess about, but `28` seems like a functional instruction, as does `72`. `bf` might be a relative load or store? if this is a vaguely normal 8-bit CPU, there ought to be conditional relative branches around somewhere too, which can help point towards instruction boundaries. most relative branches are short, either in the positive or negative direction (for loops), so that's worth keeping in mind. keeping an eye out is the best option, not really sure how to proactively find them. at the very least, it's probably not `e0..e7` as the conditional branches, because the following byte is sometimes `ff` (branch `$-1`??) or `00` (branch `$`???) continuing on, picking function boundaries somewhat arbitrarily on "seen `b9`", this is illustrative: -``` +<pre class="codebox"> ... snip ... b9 ; new function? -e500 e406 e260 e3ed 14 e100 52 72 ; 14, 52, also 72 instructions? -110b 73f2 7215 52 7504 e118 ; not sure if this makes sense +e500 e406 e260 e3ed 14 e100 52 72 <span class=blue>; 14, 52, also 72 instructions?</span> +110b 73f2 7215 52 7504 e118 <span class=blue>; not sure if this makes sense</span> 14 79 91e8 15 -b9 ; ret +b9 <span class=blue>; ret</span> ; new function? 28 c83bb5 e0fc c83cb5 28 c83db5 c83eb5 c842b5 e017 c841b5 e0ed c840b5 e061 c83fb5 bfded5 c865ed bf314d 71 9003 e006 b9 -28 b9 ; something, ret +28 b9 <span class=blue>; something, ret</span> ; new prologue 86 ...more... -``` +</pre> `28 b9` seems too short to be a function (why call to `28`? if you want `28` just inline it), so that's noteworthy. but 9003 is 3 bytes before it. 9003 as a `jz $+3`? and `28 b9` is an alternate ret? that skips over `e006; ret`? seems workable. so 90XX as conditional branch... here's a function i'd guessed at instruction boundaries for early on, and i'd gotten wrong: -``` +<pre class="codebox"> 87 86 cc27efcd28ef28 c8f1b0 e002 c863ef e05a c862ef -cd65ef 14 cc64ef e201 e400 bf83e9 76 11 77 71 16 19 90 03 bf420b e8f1b0 ; 9003 is one instruction, not two +cd65ef 14 cc64ef e201 e400 bf83e9 76 11 77 71 16 19 90 03 bf420b e8f1b0 <span class=blue>; 9003 is one instruction, not two</span> 98fb 8e 8f b9 -``` +</pre> -so fixing that up... -``` +fixing that up with what i know now it looks more like... +<pre class="codebox"> 87 86 cc27efcd28ef28 c8f1b0 e002 c863ef e05a c862ef cd65ef 14 cc64ef e201 e400 bf83e9 76 11 77 71 16 19 -9003 bf420b ; jCC $+3 +9003 bf420b <span class=blue>; jCC $+3</span> e8f1b0 -98fb ; is this jCC $-5? +98fb <span class=blue>; is this jCC $-5?</span> 8e 8f b9 -``` +</pre> so maybe 9X is a whole family of conditional branches? plausible... -``` +<pre class="codebox"> e008 c803f3 bf52d8 28 c8e6ed c8eeed -8eb9e8eded9001 ; hadn't noticed this 9001 at first. conditional branch over a ret? +8eb9e8eded9001 <span class=blue>; hadn't noticed this 9001 at first. conditional branch over a ret?</span> b9 28 c8eeed c8eded e4f1 e5ed bf82c3 bffedc bf106f -``` +</pre> adjusting that a bit: -``` +<pre class="codebox"> e008 c803f3 bf52d8 28 c8e6ed c8eeed 8eb9e8eded 9001 b9 28 c8eeed c8eded e4f1 e5ed bf82c3 bffedc bf106f -``` +</pre> finding other interesting patterns around 9Xs, this function: -``` -87 86 15 71 14 e304 53 9101 0176 ; 91XX as jCC? +<pre class="codebox"> +87 86 15 71 14 e304 53 9101 0176 <span class=blue>; 91XX as jCC?</span> 1177 e101 fe01 79 e104 f679 9034 e102 fe01 -79 9006 bf3cd5bccdc7e101fe01 ; 79 is a test or cmp or sub maybe? +79 9006 bf3cd5bccdc7e101fe01 <span class=blue>; 79 is a test or cmp or sub maybe?</span> 79 9803 bccdc7e1f7e854f121c854f1e400bffa48e1fde856f121c856f1bf 17d5bccdc7e110f6799034e850f164986c e101 fe01 79 900f e401 bf67c5 @@ -294,19 +294,17 @@ e200 e423 bf2b31 e850f1 62 983d e400 983b e102 f679 90 38 e850f1 64 9832 fe01 79 e401 bf67c5 e852f1 60 9819 e400 9812 e101 fe01 79 900e e1f7 e854f1 21 c854f1 e401 bf67c5 8e8fb9 -``` +</pre> following offsets for the proposed jCC in the third and fourth lines yields: -``` -79 9006 bf3cd5bccdc7 e101 fe01 ; so fe01 is something (`feXX`?) -79 9803 bccdc7 e1f7 e854f1 21 c854f1 e400 ; bcXXXX is something +<pre class="codebox"> +79 9006 bf3cd5bccdc7 e101 fe01 <span class=blue>; so fe01 is something (`feXX`?)</span> +79 9803 bccdc7 e1f7 e854f1 21 c854f1 e400 <span class=blue>; bcXXXX (or more?) is something</span> bffa48e1fde856f121c856f1bf -``` +</pre> -incidentally in the literal next function that knowledge of bf breaks things up into another pattern, -``` - ; 7X definitely generates some branch condition. - ; nested conditions ahead, indentation roughly for control flow +incidentally in the literal next function that knowledge of `bf` breaks things up into another pattern, +<pre class="codebox"> 86 e406 bf551b 76 980b e406 bf551b 76 9803 bf420b e406 bf8f4d 71 9003 bf420b e0ee c840b5 e0f3 c83fb5 28 c842b5 e016 c841b5 @@ -319,14 +317,20 @@ e806ef 79 900c e807ef 7a 9006 e808ef 7b 9803 bf420b 8eb9e400bf -``` +</pre> -same with more structure... -``` +this is great; `7x` definitely seems like it generates some kind of branch condition, and `9xXX` seems like a conditional branch based on that result. + +### control flow!! + +from this point onward, i'll be marking up approximate level of nesting with indentation. for each branch over a byte of code, it will be indented an additional level. when the branch target is reached, unindent. for simple control flow this gives a general idea of how PC moves through a region. + +revisiting the above with this additional structure is immediately informative! +<pre class="codebox"> 86 -e406 bf551b ; this and the 76 after are the same as the one two lines down +e406 bf551b <span class=blue>; this and the 76 after are the same as the one two lines down</span> 76 980b - e406 bf551b ; doing something to r4? getting a condition out? does bf551b reference memory? + e406 bf551b <span class=blue>; doing something to r4? getting a condition out? does bf551b reference memory?</span> 76 9803 bf420b e406 bf8f4d @@ -355,52 +359,52 @@ e80db1 e90eb1 ea0fb1 eb10b1 ec05ef e808ef 7b 9803 bf420b -; note 8e b9 here, some kind of early ret? -; missed that at first! -8eb9e400bf +<span class=blue>; note 8e b9 here, some kind of early ret?</span> +<span class=blue>; missed that at first!</span> +8eb9 e400bf 52e8ec76edbfdee6e876ed9805e401bc52e8b928c806eec805eec847eee8 03f3619016e003c84beee001c84aeee140e8a3f919c8a3f9bc3b60e102e8 4aee799026e003c84beee8eded9805e008c803f3e008c88cf971e898f919 c898f9e1bfe8a3f921c8a3f9b9e010c803f3bf9f5ce108e898f919c898f9 e1bfe8a3f921c8a3f9e001c846ee b9 -``` +</pre> reconsidering other lines, there's this from early on which is not obviously wrong but now clearly has an error: -``` +<pre class="codebox"> 79 9009 fe07 72 fe08 73 e015 d216 74 17 75 bfead9 bc3bdb 16 74 17 75 bfe605 ^ ^ $+9 is an instruction is $+9, the split was wrong -``` +</pre> so this should be -``` +<pre class="codebox"> 79 9009 fe07 72 fe08 73 e015 d2 16 74 17 75 bfead9 bc3bdb 16 74 17 75 bfe605 ^ ^ $+9 is an instruction is $+9d -``` +</pre> `16` is an instruction on its own, and so is `d2`. back to looking for interesting structures, and here's part of a larger function: -``` +<pre class="codebox"> e108 e8d5ee 79 9113 e1f8 51 72 e8d6ee e100 - 9802 ; jump forward to 42.. + 9802 <span class=blue>; jump forward to 42..</span> 50 31 42 - 99fb ; jump backwards to 50.. + 99fb <span class=blue>; jump backwards to 50..</span> bc45eb e9d5ee e008 59 49 71 e8d6ee bc40eb 69 38 41 99fb e100 76 11 77 e9d7ee 16 79 e9d8ee 17 49 9959 -``` +</pre> so there's a short loop, the loop's body is `50 31 42`, and some condition means the loop is entered skipping `50 31`. different topic for a moment, there are lots of e8XXXX/c8XXXX. what's going on with that? something to orient with... -``` +<pre class="codebox"> 87 86 28 c8f4b0 @@ -413,93 +417,101 @@ e0af c8c1b4 e434 bf8f4d 71 9003 bc87c0 -e83bb5 c807ee ; the immediates here are interesting actually -e83cb5 c808ee ; incrementing by 1 -e83db5 c809ee ; on the first and second instruction -e83eb5 c80aee ; 0xb53e, 0xee0a ? +e83bb5 c807ee <span class=blue>; the immediates here are interesting actually</span> +e83cb5 c808ee <span class=blue>; incrementing by 1</span> +e83db5 c809ee <span class=blue>; on the first and second instruction</span> +e83eb5 c80aee <span class=blue>; 0xb53e, 0xee0a ?</span> bf2fd6 bfdcdb bfc62e e101 799803bc38c0e803f3609809e841b6e942b6 -``` +</pre> + +## loads/stores!! `e8 XXXX` is probably a load! then `c8 XXXX` is a store! might be an absolute 16b address then? does that suggest `e0` is a relative load? maybe some kind of banked load. seems like `c9` is also a store, probably all c8-cf and e8-ef are store/load? -``` +<pre class="codebox"> bf8ac0 e1fe e850f3 21 c850f3 b9 28 c8feed c8fded 72 e449 bcc2d4 -e829b4 c863ef ; another 32b copy +e829b4 c863ef <span class=blue>; another 32b copy</span> e828b4 c862ef e825b4 c865ef e824b4 c864ef e200 e400 bf83e9 -c9f2ed c8f1ed e8f1ed e9f2ed ; [edf2]->r1; [edf1]->r0; r0->[edf1]; r1->[edf2]? this is wrong +c9f2ed c8f1ed e8f1ed e9f2ed <span class=blue>; [edf2]->r1; [edf1]->r0; r0->[edf1]; r1->[edf2]? this is wrong</span> bc8ad9 e40e bf4204 -c929b4 c828b4 ; again, storing and then loading later? +c929b4 c828b4 <span class=blue>; again, storing and then loading later?</span> e00d -ea28b4 eb29b4 ; but ea/eb would be r4, r5 maybe -``` +ea28b4 eb29b4 <span class=blue>; but ea/eb would be r4, r5 maybe</span> +</pre> elsewhere is another interesting sequence, annotating by the theory so far, -``` -e1bf ; r1<-[...0xbf] -e823f2 ; r0<-[0xf223] -21 ; ??? -c823f2 ; [0xf223]<-r0 -```` +<pre class="codebox"> +e1bf <span class=blue>; r1<-[...0xbf]</span> +e823f2 <span class=blue>; r0<-[0xf223]</span> +21 <span class=blue>; ???</span> +c823f2 <span class=blue>; [0xf223]<-r0</span> +</pre>` + +this is great: control flow, loads/stores, this is enough to start finding +where registers are read and written, and start figuring out arithmetic or +other operations. + +## it does, in fact, have an ALU so `21` is maybe, `op r0, r1`? `21` can't encode two registers (would be `001y yzzz`? not enough space to say `r4, r5` here). so might be an implicit r0. `28` is a different `op2 r0, r0`? consider -``` -e803f3 ; r0<-[0xf303] -60 9009 ; also 60: generates a status from r0? - 28 ; definitely an instruction - c83dee ; [0xee3d]<-r0 - e001 ; r0<-[..0x01] - c85aed ; [0xed5a]<-r0 +<pre class="codebox"> +e803f3 <span class=blue>; r0<-[0xf303]</span> +60 9009 <span class=blue>; also 60: generates a status from r0?</span> + 28 <span class=blue>; definitely an instruction</span> + c83dee <span class=blue>; [0xee3d]<-r0</span> + e001 <span class=blue>; r0<-[..0x01]</span> + c85aed <span class=blue>; [0xed5a]<-r0</span> bfd547 71 98fa -``` +</pre> `28` might be `xor r0, r0`, it's often precedes a `c8` store: -``` +<pre class="codebox"> 87 86 -28 c8f4b0 ; xor r0, r0 (?); [0xb0f4]<-r0 +28 c8f4b0 <span class=blue>; xor r0, r0 (?); [0xb0f4]<-r0</span> bf03bd e013 c820b5 ... ... -b9 ; ret -28 ; first instruction in the block? function? -c8feed c8fded ; [0xedfe]<-r0; [0xedfd]<-r0 -72 e449 bcc2d4 ; op r0, r2; r4<-[..0x49]; ?? +b9 <span class=blue>; ret</span> +28 <span class=blue>; first instruction in the block? function?</span> +c8feed c8fded <span class=blue>; [0xedfe]<-r0; [0xedfd]<-r0</span> +72 e449 bcc2d4 <span class=blue>; op r0, r2; r4<-[..0x49]; ??</span> e829b4 c863ef e828b4 c862ef e825b4 c865ef e824b4 c864ef -``` +</pre> `78` is not present as an instruction it seems, `79` is? -``` -bfc62e ; unknown -e101 ; r1<-[..0x01] -79 9803 ; op r0, r1?; jCC $+3 - bc38c0 ; unknown -e803f3 ; r0<-[0xf303] -``` +<pre class="codebox"> +bfc62e <span class=blue>; unknown</span> +e101 <span class=blue>; r1<-[..0x01]</span> +79 9803 <span class=blue>; op r0, r1?; jCC $+3</span> + bc38c0 <span class=blue>; unknown</span> +e803f3 <span class=blue>; r0<-[0xf303]</span> +</pre> `7a` is a single-byte instruction, as is `74` and `b4`: -``` +<pre class="codebox"> 29 4c 912d - ea5bed eb5ced e048 e120 ; r2<-[0xed5b]; r3<-[0xed5c]; r0<-[..0x48]; r1<-[..0x20] - 7a e080 2b ; 28 seems like xor r0, r0, so 2b is xor r0, r3? - 74 e080 29 ; 29 as xor r0, r1? + ea5bed eb5ced e048 e120 <span class=blue>; r2<-[0xed5b]; r3<-[0xed5c]; r0<-[..0x48]; r1<-[..0x20]</span> + 7a e080 2b <span class=blue>; 28 seems like xor r0, r0, so 2b is xor r0, r3?</span> + 74 e080 29 <span class=blue>; 29 as xor r0, r1?</span> 4c 9118 e850f1 64 9012 @@ -511,54 +523,54 @@ bfc62e e101 e10f e8b0b4 79 9009 e8b1 b4 62 9803 61 900a -``` +</pre> fishing around to find more about the `1X` and `2X` opcodes, this region is interesting: -``` +<pre class="codebox"> 62 9811 - e108 e854f1 ; r1<-[..0x08]; r0<-[0xf154] - 19 ; op r0, r1? ; - c854f1 ; [0xf154]<-r0; maybe 0001_1xxx is add? - e852f1 ; r0<-[0xf152] - 60 ; something on r0 producing a condition.. + e108 e854f1 <span class=blue>; r1<-[..0x08]; r0<-[0xf154]</span> + 19 <span class=blue>; op r0, r1? ;</span> + c854f1 <span class=blue>; [0xf154]<-r0; maybe 0001_1xxx is add?</span> + e852f1 <span class=blue>; r0<-[0xf152]</span> + 60 <span class=blue>; something on r0 producing a condition..</span> 9802 - e600 ; 1110_0xxx yyyyyyyy may actually be "load imm8 into rX" -16 ; + e600 <span class=blue>; 1110_0xxx yyyyyyyy may actually be "load imm8 into rX"</span> +16 <span class=blue>;</span> 74 bf67c5 - ; the sequence here is eventful -e18f ; r1<-0x8f -e825f2 ; r0<-[0xf225] -21 ; op r0, r1 -e170 ; r1<-0x70 -19 ; op r0, r1 -c825f2 ; [0xf225]<-r0 + <span class=blue>; the sequence here is eventful</span> +e18f <span class=blue>; r1<-0x8f</span> +e825f2 <span class=blue>; r0<-[0xf225]</span> +21 <span class=blue>; op r0, r1</span> +e170 <span class=blue>; r1<-0x70</span> +19 <span class=blue>; op r0, r1</span> +c825f2 <span class=blue>; [0xf225]<-r0</span> e008 c803f3 bf52d8 28 c8e6ed c8eeed -``` +</pre> some evidence that `21` may be and specifically: -``` -e1bf ; r1<-0xbf -e823f2 ; r0<-[0xf223] -21 ; op r0, r1 ; if op were add, presumably there is a sub, why not sub 0x40? -c823f2 ; [0xf223]<-r0 ; and masks bits, makes somewhat more sense... -``` +<pre class="codebox"> +e1bf <span class=blue>; r1<-0xbf</span> +e823f2 <span class=blue>; r0<-[0xf223]</span> +21 <span class=blue>; op r0, r1 ; if op were add, presumably there is a sub, why not sub 0x40?</span> +c823f2 <span class=blue>; [0xf223]<-r0 ; and masks bits, makes somewhat more sense...</span> +</pre> is `78`..`7f` is `cmp/test/sub r0, rN`: -``` +<pre class="codebox"> e812b1 e913b1 ea14b1 eb15b1 ecfcee -7c 9012 ; is [0xeefc] == [0xb112]? +7c 9012 <span class=blue>; is [0xeefc] == [0xb112]?</span> e8fdee - 79 900c ; is [0xeefd] == [0xb113]? + 79 900c <span class=blue>; is [0xeefd] == [0xb113]?</span> e8feee - 7a 9006 ; is [0xeefe] == [0xb114]? + 7a 9006 <span class=blue>; is [0xeefe] == [0xb114]?</span> e8ffee - 7b 9803 ; is [0xeeff] == [0xb115]? + 7b 9803 <span class=blue>; is [0xeeff] == [0xb115]?</span> bf420b e80db1 e90eb1 ea0fb1 eb10b1 ec05ef -7c 9012 ; is the same for [0xb10d..0xb110] == [0xef05..0xef08] +7c 9012 <span class=blue>; is the same for [0xb10d..0xb110] == [0xef05..0xef08]</span> e806ef 79 900c e807ef @@ -567,76 +579,76 @@ ec05ef 7b 9803 bf420b 8e b9 -``` +</pre> notably `78` does not seem to appear as an instruction. preference for `xor r0, r0 (0x28)`? or not sub? this may help make sense of operand ordering as well, -``` -87 86 ; push r7; push r6 -14 76 15 77 f698 ; mov r4, r0; sub r0, r6, r6; mov r5, r0; sub r0, r7, r7 -19 e0f2 c8ecee ; mov r0->r1; r0<-0xf2; r0->[0xeeec] -17 ; this is why it's likely that the selected register is a destination, - ; 17 would be mov r0, r7. if 77 modified r0, r7 would be unmodified, and 77 would be dead code - ; instead if 77 modifies r7, this moves `r7_in - r5` into r0 -71 ; then this subtracts from r1, preservation of r0 after f698 (or 15) - ; otherwise 19 would be pointless -16 ; r6->r0 -c0 ; ??? -c9eeee ; why it would modify from r1, `[0xeeee]<-r1` -c8edee ; and `[0xeeed]<-r0` +<pre class="codebox"> +87 86 <span class=blue>; push r7; push r6</span> +14 76 15 77 f698 <span class=blue>; mov r4, r0; sub r0, r6, r6; mov r5, r0; sub r0, r7, r7</span> +19 e0f2 c8ecee <span class=blue>; mov r0->r1; r0<-0xf2; r0->[0xeeec]</span> +17 <span class=blue>; this is why it's likely that the selected register is a destination, 17 would</span> + <span class=blue>; be mov r0, r7. if 77 modified r0, r7 would be unmodified, and 77 would be dead</span> + <span class=blue>; code. instead if 77 modifies r7, this moves `r7_in - r5` into r0</span> +71 <span class=blue>; then this subtracts from r1, preservation of r0 after f698 (or 15)</span> + <span class=blue>; otherwise 19 would be pointless</span> +16 <span class=blue>; r6->r0</span> +c0 <span class=blue>; ???</span> +c9eeee <span class=blue>; why it would modify from r1, `[0xeeee]<-r1`</span> +c8edee <span class=blue>; and `[0xeeed]<-r0`</span> e1ff f651 72 e412 bf4bd4 8e 8f b9 -``` +</pre> but does any of this mean: -``` -c83bef ; [0xef3b]<-r0 -c93cef ; [0xef3c]<-r1 -ca3def ; [0xef3d]<-r2 -cb3eef ; [0xef3e]<-r3 -e825ee ; r0<-[0xee25] -e93bef ; r1<-[0xef3b] -19 c825ee ; op r0, r1; [0xee25]<-r0 ; 18..1f is likely not add, sub, could be adc/sbc, maybe `or` -e826ee ; r0<-[0xee26] -e93cef ; r0<-[0xef3c] -19 c826ee ; op r0, r1; [0xee26]<-r0 ; if 19 is `or`, this is computing or of two 32 regions -e827ee ; r0<-[0xee27] -e93def ; r1<-[0xef3d] -19 c827ee ; op r0, r1; [0xee27]<-r0 -e828ee ; r0<-[0xee28] -e93eef ; r1<-[0xef3f] -19 c828ee ; op r0, r1; [0xee28]<-r0 -ea3bef ; r2<-[0xef3b] ; then .. something? -eb3cef ; r3<-[0xef3c] -ec3def ; r4<-[0xef3d] -ed3eef ; r5<-[0xef3e] -80 e837ef ; op; r0<-[0xef37] -2280 ; op r0, r2; op -e838ef ; r0<-[0xef38] -2373 ; op r0, r3; op r0, r3 -e839ef ; r0<-[0xef39] -2474 ; op r0, r4; op r0, r4 -e83aef ; r0<-[0xef3a] -2575 ; op r0, r5; op r0, r5 -``` +<pre class="codebox"> +c83bef <span class=blue>; [0xef3b]<-r0</span> +c93cef <span class=blue>; [0xef3c]<-r1</span> +ca3def <span class=blue>; [0xef3d]<-r2</span> +cb3eef <span class=blue>; [0xef3e]<-r3</span> +e825ee <span class=blue>; r0<-[0xee25]</span> +e93bef <span class=blue>; r1<-[0xef3b]</span> +19 c825ee <span class=blue>; op r0, r1; [0xee25]<-r0 ; 18..1f is likely not add, sub, could be adc/sbc, maybe `or`</span> +e826ee <span class=blue>; r0<-[0xee26]</span> +e93cef <span class=blue>; r0<-[0xef3c]</span> +19 c826ee <span class=blue>; op r0, r1; [0xee26]<-r0 ; if 19 is `or`, this is computing or of two 32 regions</span> +e827ee <span class=blue>; r0<-[0xee27]</span> +e93def <span class=blue>; r1<-[0xef3d]</span> +19 c827ee <span class=blue>; op r0, r1; [0xee27]<-r0</span> +e828ee <span class=blue>; r0<-[0xee28]</span> +e93eef <span class=blue>; r1<-[0xef3f]</span> +19 c828ee <span class=blue>; op r0, r1; [0xee28]<-r0</span> +ea3bef <span class=blue>; r2<-[0xef3b] ; then .. something?</span> +eb3cef <span class=blue>; r3<-[0xef3c]</span> +ec3def <span class=blue>; r4<-[0xef3d]</span> +ed3eef <span class=blue>; r5<-[0xef3e]</span> +80 e837ef <span class=blue>; op; r0<-[0xef37]</span> +2280 <span class=blue>; op r0, r2; op</span> +e838ef <span class=blue>; r0<-[0xef38]</span> +2373 <span class=blue>; op r0, r3; op r0, r3</span> +e839ef <span class=blue>; r0<-[0xef39]</span> +2474 <span class=blue>; op r0, r4; op r0, r4</span> +e83aef <span class=blue>; r0<-[0xef3a]</span> +2575 <span class=blue>; op r0, r5; op r0, r5</span> +</pre> or this: -``` -e876b4 ; r0<-[0xb476] -e977b4 ; r1<-[0xb476] -c8e6b0 ; [0xb0e6]<-r0 -c9e7b0 ; [0xb0e7]<-r1 -28 c8e8b0 ; [0xb0e8]<-0 -c8e9b0 ; [0xb0e9]<-0 +<pre class="codebox"> +e876b4 <span class=blue>; r0<-[0xb476]</span> +e977b4 <span class=blue>; r1<-[0xb476]</span> +c8e6b0 <span class=blue>; [0xb0e6]<-r0</span> +c9e7b0 <span class=blue>; [0xb0e7]<-r1</span> +28 c8e8b0 <span class=blue>; [0xb0e8]<-0</span> +c8e9b0 <span class=blue>; [0xb0e9]<-0</span> 72 73 -e9d8ee ; r1<-[0xeed8] -e8d7ee ; r0<-[0xeed7] -bff5ec ; ? -ecd5ee ; r4<-[0xeed5] +e9d8ee <span class=blue>; r1<-[0xeed8]</span> +e8d7ee <span class=blue>; r0<-[0xeed7]</span> +bff5ec <span class=blue>; ?</span> +ecd5ee <span class=blue>; r4<-[0xeed5]</span> bc63ea - ; so this loop is... do { X r1, X r3, X r2, X r1, X r0, X r4 } while cond(r4)? + <span class=blue>; so this loop is... do { X r1, X r3, X r2, X r1, X r0, X r4 } while cond(r4)?</span> 69 3b 3a 39 38 44 99f8 ecd3ee 5474 e8d4ee 097114 @@ -646,17 +658,19 @@ e8daee c877b4 e8d9ee c876b4 -``` +</pre> `18..1f` seem like `r0 |= rX`: -``` +<pre class="codebox"> e835ef e932ef 19 e933ef 19 e934ef 19 9019 -``` +</pre> where `19` would mean this `or`s all four bytes and checking for.. zero? non-zero? +## inc/dec is a loop's best friend + and maybe 4X is dec? shr? `40` agrees, here's a branch table or smth? -``` +<pre class="codebox"> 9814 11 19 9810 @@ -667,130 +681,132 @@ and maybe 4X is dec? shr? `40` agrees, here's a branch table or smth? 40 98df 40 bf57d0 bfbfcf -``` +</pre> seems like `40` is `dec r0`, consider this loop: -``` +<pre class="codebox"> e103 e87fb4 - 21 ; op r1 - 74 ; op r4 - e500 ; r5<-0x00 - e00b ; r0<-0x0b + 21 <span class=blue>; op r1</span> + 74 <span class=blue>; op r4</span> + e500 <span class=blue>; r5<-0x00</span> + e00b <span class=blue>; r0<-0x0b</span> loop: - 69 34 35 40 ; op r1?; op? r4; op? r5; dec r1 - 90 fa ; jnz loop -``` + 69 34 35 40 <span class=blue>; op r1?; op? r4; op? r5; dec r1</span> + 90 fa <span class=blue>; jnz loop</span> +</pre> so 0100_0XXX seems like `dec rN`. 0011_0XXX may be `inc rN`? and what is 0x69. some more about the low 7Xs: -``` +<pre class="codebox"> 86 -14 76 e8e2ed ; r4->r0? ; ...??? r6; r0<-[0xede2] .. maybe 76 is xchg r0, r6? -7e 9817 ; 7e is maybe "compare r0 and r6"; jz? +14 76 e8e2ed <span class=blue>; r4->r0? ; ...??? r6; r0<-[0xede2] .. maybe 76 is xchg r0, r6?</span> +7e 9817 <span class=blue>; 7e is maybe "compare r0 and r6"; jz?</span> e003 c858ef e0ff c859ef ce5aefe458e5efbfded6cee2ed 8e b9 -``` +</pre> since other ops seem oriented around operations on r0 and modifying r0, the low `7x`'s might be moving from `r0` to a different register? in contrast to low `1x` which move into r0. for example in the partially-disassembled snippet, -``` -r1 <- 0x04 -r0 <- r2 +<pre class="codebox"> +r1 <- 0x04 +r0 <- r2 r0 |= r1 op7x.lo r0, r2 -r0 <- 0x32 -[0xf029] <- r0 -``` +r0 <- 0x32 +[0xf029] <- r0 +</pre> it's loaded `r0`, modified it, and would clobber it after the unknown op. `op7x.lo` must at least read `r0` and write `r2` or other state. there aren't any other instructions to read flags or anything before the next `op7x.lo`, -``` -r1 <- 0x10 -r0 <- r2 +<pre class="codebox"> +r1 <- 0x10 +r0 <- r2 r0 |= r1 op7x.lo r0, r2 -``` +</pre> so it could be an add/sub to store back into r2, but the `or` wouldn't make sense. if the `r0` is the only register that can be modified by arithmetic instructions - instructions seem small so there's not much encoding space - then modifying a value would look like "copy to r0, modify, copy back". meanwhile `78..7f` is probably a `cmp` (rather than `sub`): in a sequence like -``` - r1 <- 0x03 - r0 <- [0xb475] - op7xhi r0, r1 ; byte 0x79 - jcc.lo.0 $+0x10 ; bytes 9010, destination `dest` - r1 <- 0x04 - r0 <- [0xeed2] +<pre class="codebox"> + r1 <- 0x03 + r0 <- [0xb475] + op7xhi r0, r1 <span class=blue>; byte 0x79</span> + jcc.lo.0 $+0x10 <span class=blue>; bytes 9010, destination `dest`</span> + r1 <- 0x04 + r0 <- [0xeed2] op7xhi r0, r1 jcc.hi.0 $+0x08 - r0 <- 0x03 - [0xeed2] <- r0 + r0 <- 0x03 + [0xeed2] <- r0 op.bc ec2c dest: - r1 <- 0x03 -``` + r1 <- 0x03 +</pre> so if `op7xhi r0, r1` modified the destination, that modification is clobbered. it generates flags (consumed by `jcc.lo.0`). `79` is a very common prefix to `90xx` or `98xx` branches, but uncommon to stand alone. counterpoint though, sequences like -``` -e100 ; r1 <- 0x00 -bfecac ; unknown -c9dfee c8deee ; [0xeedf] <- r1; [0xeede] <- r0 -e8eded 902f ; r0 <- [0xeded]; jcc $+0x2f? -``` +<pre class="codebox"> +e100 <span class=blue>; r1 <- 0x00</span> +bfecac <span class=blue>; unknown</span> +c9dfee c8deee <span class=blue>; [0xeedf] <- r1; [0xeede] <- r0</span> +e8eded 902f <span class=blue>; r0 <- [0xeded]; jcc $+0x2f?</span> +</pre> have a useful branching condition with only loads (barring `bfecac` generating a status). and even if `bfecac` did generate a status, the next code if this is taken would be -``` -e8e8ed 9841 ; r0 <- [0xede8]; jcc $+0x41 -``` +<pre class="codebox"> +e8e8ed 9841 <span class=blue>; r0 <- [0xede8]; jcc $+0x41</span> +</pre> so either the `e8` load is enough to generate a status or the `98` branch is fully determined from the ealier `bfecac`. it's possible; the branches could be a pair like `jnz` and `ja`, where there is a third reasonable condition (`jb`) that becomes the implicit third outcome. but in that case why `e8e8ed` before the branch? so perhaps the `90`/`98` conditions are predicated fully on the contents of `r0`? ah, still unsure about `bf`, but this seems useful: -``` +<pre class="codebox"> 86 14 76 e8e2ed 7e 9817 - e003 c858ef ; [0xef58] <- 0 + e003 c858ef <span class=blue>; [0xef58] <- 0</span> e0ff - c859ef ce5aef ; [0xef59] <- 0; [0xef5a] <- 0xff - e458 ; r4 <- 0x58 - e5ef ; r5 <- 0xef ; so r5 and r4 together hold `ef58`, just assigned - bfded6 ; consumes r4, r5, writes r6? - cee2ed ; [0xed2e] <- r6 + c859ef ce5aef <span class=blue>; [0xef59] <- 0; [0xef5a] <- 0xff</span> + e458 <span class=blue>; r4 <- 0x58</span> + e5ef <span class=blue>; r5 <- 0xef ; so r5 and r4 together hold `ef58`, just assigned</span> + bfded6 <span class=blue>; consumes r4, r5, writes r6?</span> + cee2ed <span class=blue>; [0xed2e] <- r6</span> 8e b9 -``` +</pre> + +# more subtle load/store? distracted by `fe01`. found this: -``` -87 86 ; push r7; push r6 -28 c83df3 ; xor r0, r0; [0xf33d] <- r0 -e00a c83cf3 ; r0 <- 0x0a; [0xf33c] <- r0 -28 c8c2ee ; xor r0, r0; [0xeec2] <- r0 -e6ca e7ee ; r6<-ca; r7<-ee ; r7:r6 = 0xeeca -fe02 c837f3 ; fe02 ; [0xf337] <- r0 -fe01 c836f3 ; fe01 ; [0xf336] <- r0 -fe03 c838f3 ; fe03 ; [0xf338] <- r0 -fe04 c839f3 ; fe04 ; [0xf339] <- r0 -fe05 c83af3 ; fe05 ; [0xf33a] <- r0 -fe06 c83bf3 ; fe06 ; [0xf33b] <- r0 -f6 9827 ; -``` +<pre class="codebox"> +87 86 <span class=blue>; push r7; push r6</span> +28 c83df3 <span class=blue>; xor r0, r0; [0xf33d] <- r0</span> +e00a c83cf3 <span class=blue>; r0 <- 0x0a; [0xf33c] <- r0</span> +28 c8c2ee <span class=blue>; xor r0, r0; [0xeec2] <- r0</span> +e6ca e7ee <span class=blue>; r6<-ca; r7<-ee ; r7:r6 = 0xeeca</span> +fe02 c837f3 <span class=blue>; fe02 ; [0xf337] <- r0</span> +fe01 c836f3 <span class=blue>; fe01 ; [0xf336] <- r0</span> +fe03 c838f3 <span class=blue>; fe03 ; [0xf338] <- r0</span> +fe04 c839f3 <span class=blue>; fe04 ; [0xf339] <- r0</span> +fe05 c83af3 <span class=blue>; fe05 ; [0xf33a] <- r0</span> +fe06 c83bf3 <span class=blue>; fe06 ; [0xf33b] <- r0</span> +f6 9827 <span class=blue>;</span> +</pre> so `fe0X` writes to `r0`. before `feXX` are issued, `r6` and `r7 are often loaded with values that are also similar to nearby pointer values. so `r7:r6` usually forms a valid pointer. `fe00` does not exist in the image. is there a shorter instruction for a load of `[r7:r6 + 0]`? separately, looks like `deXX` is `store r0 to [r7:r6 + XX]`. consider this code: -``` -87 86 ; push r7; push r6 -ca40ef cc41ef ; [0xef40] <- r2; [0xef41] <- r4 -e412 bf14e9 76 11 77 ; r4 <- 0x12; call? ; r0->r6; r1->r0; r0->r7 -e072 ; r0 <- 0x72 -de03 ; hmm -e841ef de04 ; r0 <- [0xef41]; hmm -e840ef de05 ; r0 <- [0xef40]; hmm -e83eee de06 ; r0 <- [0xee3e]; hmm -e200 16 74 17 75 bf5f05 ; e2 <- 00; r6->r0; r0->r4; r7->r0; r0->r5; call? -8e 8f b9 ; pop r6; pop r7; ret -``` +<pre class="codebox"> +87 86 <span class=blue>; push r7; push r6</span> +ca40ef cc41ef <span class=blue>; [0xef40] <- r2; [0xef41] <- r4</span> +e412 bf14e9 76 11 77 <span class=blue>; r4 <- 0x12; call? ; r0->r6; r1->r0; r0->r7</span> +e072 <span class=blue>; r0 <- 0x72</span> +de03 <span class=blue>; hmm</span> +e841ef de04 <span class=blue>; r0 <- [0xef41]; hmm</span> +e840ef de05 <span class=blue>; r0 <- [0xef40]; hmm</span> +e83eee de06 <span class=blue>; r0 <- [0xee3e]; hmm</span> +e200 16 74 17 75 bf5f05 <span class=blue>; e2 <- 00; r6->r0; r0->r4; r7->r0; r0->r5; call?</span> +8e 8f b9 <span class=blue>; pop r6; pop r7; ret</span> +</pre> so if the move of `r1:r0` to `r7:r6` is for a reason, that likely means: * the calling convention returns pointers as `r1:r0` @@ -798,61 +814,63 @@ so if the move of `r1:r0` to `r7:r6` is for a reason, that likely means: then between each `deXX` the program only loads `r0` with an `e8XXXX`, so `deXX` does not modify `r0`. if it modifies other registers, it's not `r2` (clobbered later), not `r4`, `r5` (clobbered later). if it's an indirect store through `r7:r6` it doesn't seem to increment (if it does, this is a .... very strange access pattern). -most likely seems to be `r0 -> [r7:r6 + imm8]`. that seems like a plausible function: -``` +most likely seems to be `r0 -> [r7:r6 + imm8]`. that seems like a plausible function: +<pre class="codebox"> push r7; push r6; -[0xef40] <- r2; [0xef41] <- r4; -r4 <- 0x12; call 0xe914; -r1:r0 -> r7:r6 ; grouped a few moves together for this overall effect -r0 <- 0x72; [r7:r6 + 3] <- r0 -r0 <- [0xef41]; [r7:r6 + 4] <- r0 -r0 <- [0xef40]; [r7:r6 + 5] <- r0 -r0 <- [0xee3e]; [r7:r6 + 6] <- r0 -r2 <- 0x00; r7:r6 -> r5:r4; call 0x055f ; eliding more movs +[0xef40] <- r2; [0xef41] <- r4; +r4 <- 0x12; call 0xe914; +r1:r0 -> r7:r6 <span class=blue>; grouped a few moves together for this overall effect</span> +r0 <- 0x72; [r7:r6 + 3] <- r0 +r0 <- [0xef41]; [r7:r6 + 4] <- r0 +r0 <- [0xef40]; [r7:r6 + 5] <- r0 +r0 <- [0xee3e]; [r7:r6 + 6] <- r0 +r2 <- 0x00; r7:r6 -> r5:r4; call 0x055f ; eliding more movs pop r6; pop r7; ret -``` +</pre> and `18..1f` is `or`! here's another region: -``` -e400 bf4204 ; r4 <- 0x00; call -76 11 77 ; r1:r0 -> r7:r6 ; similar to before: exact movs are r0->r6; r1->r0; r0->r7 -71 16 ; r0 -> r1; r6 -> r0 -19 ; unknown -9003 ; jcc $+3 - bf420b ; call -e0ff de03 ; r0 <- 0xff; [r7:r6 + 3] <- r0 -28 de04 ; xor r0, r0; [r7:r6 + 4] <- r0 -e005 de05 ; r0 <- 0x05; [r7:r6 + 5] <- r0 -28 de06 ; xor r0, r0; [r7:r6 + 6] <- r0 -``` +<pre class="codebox"> +e400 bf4204 <span class=blue>; r4 <- 0x00; call</span> +76 11 77 <span class=blue>; r1:r0 -> r7:r6 ; similar to before: exact movs are r0->r6; r1->r0; r0->r7</span> +71 16 <span class=blue>; r0 -> r1; r6 -> r0</span> +19 <span class=blue>; unknown</span> +9003 <span class=blue>; jcc $+3</span> + bf420b <span class=blue>; call</span> +e0ff de03 <span class=blue>; r0 <- 0xff; [r7:r6 + 3] <- r0</span> +28 de04 <span class=blue>; xor r0, r0; [r7:r6 + 4] <- r0</span> +e005 de05 <span class=blue>; r0 <- 0x05; [r7:r6 + 5] <- r0</span> +28 de06 <span class=blue>; xor r0, r0; [r7:r6 + 6] <- r0</span> +</pre> `bf4204` returned a pointer that would be used in `de03` and later, below. before it is used there though, `71 16 19` does something with the two bytes of pointer before conditionally calling(?) something(?). there aren't many useful operations on the two bytes. it's probably `or`, meaning `71 16 19` forms a null check, and there are likely other hits for that sequence... there are seven. four have the condition branch over a `bf420b`, so maybe `0xb42` is a fault handler? reset? some kind of trap. it probably doesn't return here since i'm certain that `r7:r6` is not useful for writing anyway. also, that tells us `90` is `jnz`. `98` then is probably `jz`. that's consistent with sequences from earlier, like -``` -11 19 9810 ; r0 <- r1; r0 |= r1 ; jz $+10 -40 98b6 ; dec r0 ; jz $-0x4a -40 98ba ; dec r0 ; jz $-0x46 -40 98d8 ; dec r0 ; jz $-0x28 -40 98db ; dec r0 ; jz $-0x25 -40 98df ; dec r0 ; jz $-0x21 -``` +<pre class="codebox"> +11 19 9810 <span class=blue>; r0 <- r1; r0 |= r1 ; jz $+10</span> +40 98b6 <span class=blue>; dec r0 ; jz $-0x4a</span> +40 98ba <span class=blue>; dec r0 ; jz $-0x46</span> +40 98d8 <span class=blue>; dec r0 ; jz $-0x28</span> +40 98db <span class=blue>; dec r0 ; jz $-0x25</span> +40 98df <span class=blue>; dec r0 ; jz $-0x21</span> +</pre> implementing a branch table for `i` in `0..5`? +# a multiplier! + `69` and `38..3f` make more sense from this loop: -``` -28 c8e8b0 c8e9b0 ; xor r0, r0; [0xb0e8] <- r0; [0xb0e9] <- r0; -72 73 ; r0 -> r2; r0 -> r3 -e9d8ee e8d7ee ; r1:r0 <- [0xeed7:0xeed8] -bff5ec ; call -ecd5ee ; r4 <- [0xee5d] -bc63ea ; dunno - 69 3b 3a 39 38 44 ; ??? but r3, r2, r1, r0, then dec r4 -99f8 ; conditional branch to ??? -``` +<pre class="codebox"> +28 c8e8b0 c8e9b0 <span class=blue>; xor r0, r0; [0xb0e8] <- r0; [0xb0e9] <- r0;</span> +72 73 <span class=blue>; r0 -> r2; r0 -> r3</span> +e9d8ee e8d7ee <span class=blue>; r1:r0 <- [0xeed7:0xeed8]</span> +bff5ec <span class=blue>; call</span> +ecd5ee <span class=blue>; r4 <- [0xee5d]</span> +bc63ea <span class=blue>; dunno</span> + 69 3b 3a 39 38 44 <span class=blue>; ??? but r3, r2, r1, r0, then dec r4</span> +99f8 <span class=blue>; conditional branch to ???</span> +</pre> so for each of `3b..38` it operates on `rN`, maybe `r0`. but if it accumulates into `r0`, why loop `r4` times? if `3b` mutates only `r3`, then there are few operations that make sense for all four registers: * not `adc/sbc` (add/sub X to each byte?) @@ -866,55 +884,55 @@ if it's `rcr/rcl` then `69` clears the carry flag between loops so the loop impl assuming `38..3f` is `rcr` since `r3:r2:r1:r0` matches endianness seen elsewhere. seems like `fa` is similar to `fe`, but loading through `r3:r2` instead of `r7:r6`. -``` -fe07 72 fe08 73 fa03 c872ed fa02 c871ed ; [r7:r6 + 7..8] -> r3:r2; fa03; store [0xed72]; fa02; store [0xed71] +<pre class="codebox"> +fe07 72 fe08 73 fa03 c872ed fa02 c871ed <span class=blue>; [r7:r6 + 7..8] -> r3:r2; fa03; store [0xed72]; fa02; store [0xed71]</span> fe07 72 fe08 73 e004 d2 bceacc -fe07 72 fe08 73 e873ed da02 ; [r7:r6 + 7..8] -> r3:r2; load [0xed73]; da02 -fe07 72 fe08 73 e875ed da04 e874ed da03 ; [r7:r6 + 7..8] -> r3:r2; load [0xed73]; da02 -``` +fe07 72 fe08 73 e873ed da02 <span class=blue>; [r7:r6 + 7..8] -> r3:r2; load [0xed73]; da02</span> +fe07 72 fe08 73 e875ed da04 e874ed da03 <span class=blue>; [r7:r6 + 7..8] -> r3:r2; load [0xed73]; da02</span> +</pre> `fa` might clobber `r3:r2`? again if it was "load and increment" or "store and increment" then the immediate offsets are very odd. could just be redundant loads of `r3:r2`? also from this, `da` looks similar to `de`: `store r0 to [r3:r2 + XX]`. `21` might be `and r0, r1`? `r1` seem to often have some immediate consecutive bitmasky thing loaded shortly before `21`. same for `22`. check this out: -``` +<pre class="codebox"> f2 74 -e001 e100 e200 e300 ; r3:r2:r1:r0 <- 0 -9804 ; ??? - 50 31 32 33 ; op ?r0?; op r1, op r2, op r3 - maybe - ; `<op> r0; rcl r1; rcl r2; rcl r3 - - 44 ; dec r4 -99f9 ; conditional loop -ec2eef 24 80 ; load r4; op r4; push r0 -e82fef 21 71 ; load r0; op r2; r0->r1 -e830ef 22 72 ; load r0; op r2; r0->r2 -e831ef 23 73 ; load r0; op r3; r0->r3 -88 ; pop r0 -c832ef c933ef ca34ef cb35ef ; store r3:r0 -> [0xef32:0xef35] -``` +e001 e100 e200 e300 ; r3:r2:r1:r0 <- 0 +9804 <span class=blue>; ???</span> + 50 31 32 33 <span class=blue>; op ?r0?; op r1, op r2, op r3 - maybe</span> + <span class=blue>; `<op> r0; rcl r1; rcl r2; rcl r3</span> + + 44 <span class=blue>; dec r4</span> +99f9 <span class=blue>; conditional loop</span> +ec2eef 24 80 <span class=blue>; load r4; op r4; push r0</span> +e82fef 21 71 <span class=blue>; load r0; op r2; r0->r1</span> +e830ef 22 72 <span class=blue>; load r0; op r2; r0->r2</span> +e831ef 23 73 <span class=blue>; load r0; op r3; r0->r3</span> +88 <span class=blue>; pop r0</span> +c832ef c933ef ca34ef cb35ef <span class=blue>; store r3:r0 -> [0xef32:0xef35]</span> +</pre> looks like the loop is building up a 32b bitmask, `and`ing, then storing back? ok, different function: -``` - e408 ; r4 <- 8 +<pre class="codebox"> + e408 <span class=blue>; r4 <- 8</span> back: - 69 3d ; ccf; rcr r5 - 911d ; jcc.lo.1 forward + 69 3d <span class=blue>; ccf; rcr r5</span> + 911d <span class=blue>; jcc.lo.1 forward</span> back: - e8eab0 56 c8eab0 ; r0 <- [0xb0ea]; op5x r0, r6; [0xb0ea] <- r0 - e8ebb0 09 c8ebb0 ; r0 <- [0xb0eb]; op0x r0, r1; [0xb0eb] <- r0 - e8ecb0 0a c8ecb0 ; r0 <- [0xb0ec]; op0x r0, r2; [0xb0ec] <- r0 - e8edb0 0b c8edb0 ; r0 <- [0xb0ed]; op0x r0, r3; [0xb0ed] <- r0 + e8eab0 56 c8eab0 <span class=blue>; r0 <- [0xb0ea]; op5x r0, r6; [0xb0ea] <- r0</span> + e8ebb0 09 c8ebb0 <span class=blue>; r0 <- [0xb0eb]; op0x r0, r1; [0xb0eb] <- r0</span> + e8ecb0 0a c8ecb0 <span class=blue>; r0 <- [0xb0ec]; op0x r0, r2; [0xb0ec] <- r0</span> + e8edb0 0b c8edb0 <span class=blue>; r0 <- [0xb0ed]; op0x r0, r3; [0xb0ed] <- r0</span> - 69 ; ccf + 69 <span class=blue>; ccf</span> forward: - 36 31 32 33 44 ; something on r6, r1, r2, r3; dec r4 - 90d8 ; jnz back - b9 ; ret -``` + 36 31 32 33 44 <span class=blue>; something on r6, r1, r2, r3; dec r4</span> + 90d8 <span class=blue>; jnz back</span> + b9 <span class=blue>; ret</span> +</pre> first observation: `91` is probably `jnc`. if it's `jc` then the loop would be entered with a carry flag set ... only on the first iteration. it seems more likely this is relying on knowing `cf` is unset to not execute `ccf` needlessly at the jump target. compared with other codegen, maybe this is a hand-written intrinsic? @@ -923,16 +941,16 @@ second observation: `30..37` might be `rcl`? whatever `56 .. 09 .. 0a .. 0b` doe then if `30..37` is `rcl`, the loop implements `<u32> << 8`. why is TBD, but it seems like a plausible high-level behavior. elsewhere, this helps explain `50`: -``` -f6 74 ; <op>; r0 -> r4 -e001 e100 e200 e300 ; r3:r2:r1:r0 <- 00_00_00_01 -9804 ; jcc $+4 - 50 31 32 33 ; <op>; rcl r1; rcl r2; rcl r3 +<pre class="codebox"> +f6 74 <span class=blue>; <op>; r0 -> r4</span> +e001 e100 e200 e300 <span class=blue>; r3:r2:r1:r0 <- 00_00_00_01</span> +9804 <span class=blue>; jcc $+4</span> + 50 31 32 33 <span class=blue>; <op>; rcl r1; rcl r2; rcl r3</span> - 44 ; dec r4 -99f9 ; jcc $-7 -c83bef c93cef ca3def cb3eef ; [0xef3b:0xef3e] <- r3:r2:r1:r0 -``` + 44 <span class=blue>; dec r4</span> +99f9 <span class=blue>; jcc $-7</span> +c83bef c93cef ca3def cb3eef <span class=blue>; [0xef3b:0xef3e] <- r3:r2:r1:r0</span> +</pre> if `50` were `add r0, r0`, this implements `1u32 << r4` - `add r0, r0` is functionally the same as shifting `r0` left by 1 with highest bit carried @@ -942,74 +960,76 @@ seems that `cf` is indeterminate. this region also reinforces that `99` is `jnc`. if `99` were `jc` the loop would be taken at most once, but as `jnc` it is taken until `r4 == 0`. this in turn helps explain `08..0f`: -``` -e408 ; r4 <- 8 +<pre class="codebox"> +e408 <span class=blue>; r4 <- 8</span> bit: - 69 3d 911d ; ccf; rcr r5; jc clear - e8eab0 56 c8eab0 ; add [0xb0ea], r6 ; (taking creative liberties with the isa) - e8ebb0 09 c8ebb0 ; op [0xb0eb], r1 - e8ecb0 0a c8ecb0 ; op [0xb0ec], r2 - e8edb0 0b c8edb0 ; op [0xb0ed], r3 + 69 3d 911d <span class=blue>; ccf; rcr r5; jc clear</span> + e8eab0 56 c8eab0 <span class=blue>; add [0xb0ea], r6 ; (taking creative liberties with the isa)</span> + e8ebb0 09 c8ebb0 <span class=blue>; op [0xb0eb], r1</span> + e8ecb0 0a c8ecb0 <span class=blue>; op [0xb0ec], r2</span> + e8edb0 0b c8edb0 <span class=blue>; op [0xb0ed], r3</span> clear: - 69 36 31 32 33 44 ; ccf; rcl r6:r1:r2:r3; dec r4 -90d8 ; jnz bit -b9 ; ret -``` + 69 36 31 32 33 44 <span class=blue>; ccf; rcl r6:r1:r2:r3; dec r4</span> +90d8 <span class=blue>; jnz bit</span> +b9 <span class=blue>; ret</span> +</pre> so... this would be a 32b by 8b multiply.. but only if `op` is `adc`. for each set bit in `r5`, add `r6:r1:r2:r3` into `0xb0ea`. shift `r6:r1:r2:r3` left 1 regardless of bit being set in `r5`. repeat 8 times for each bit in `r5`. ... that said, the calling convention for this is different from every other function, and is moderately unhinged: why is `r4` unused? why is `r0` unused? why is `r6` *used*??? either way. `08..0f` is `adc`. but this function is weird enough to try figuring that out sooner than later. looking for the memory address referenced here, `0xb0ea` there's this region i'd looked at very early on that seems relevant: -``` +<pre class="codebox"> c870ef c971ef e878b4 e979b4 ec70ef 59 4c 74 11 e971ef 49 71 14 c977b4 c876b4 28 c8beb9 e0ea c8c0b9 e00d c8bfb9 e201 e405 bcc632 e105 e875b4 79 9004 28 c8d2ee -b98485 86 e600 ; something; push r6; r6 <- 0 -ceeab0 ; [0xb0ea] <- 0 -ceebb0 ; [0xb0eb] <- 0 -ceecb0 ; [0xb0ec] <- 0 -ceedb0 ; [0xb0ed] <- 0 -76 ede6b0 ; r0 -> r6 ; r5 <- [0xb0e6] -bf 2f ; op; op -ed ed e7b0bf 2f ; ?? -ed ed e8b0bf 2f ; ?? -ed ed e9b0bf 2f ; ?? -ed ; ?? -e8eab0 ; [0xb0ea:0xbeed] <- r3:r2:r1:r0 +b98485 86 e600 <span class=blue>; something; push r6; r6 <- 0</span> +ceeab0 <span class=blue>; [0xb0ea] <- 0</span> +ceebb0 <span class=blue>; [0xb0eb] <- 0</span> +ceecb0 <span class=blue>; [0xb0ec] <- 0</span> +ceedb0 <span class=blue>; [0xb0ed] <- 0</span> +76 ede6b0 <span class=blue>; r0 -> r6 ; r5 <- [0xb0e6]</span> +bf 2f <span class=blue>; op; op</span> +ed ed e7b0bf 2f <span class=blue>; ??</span> +ed ed e8b0bf 2f <span class=blue>; ??</span> +ed ed e9b0bf 2f <span class=blue>; ??</span> +ed <span class=blue>; ??</span> +e8eab0 <span class=blue>; [0xb0ea:0xbeed] <- r3:r2:r1:r0</span> e9ebb0 eaecb0 ebedb0 8e 8d 8c b9 -``` +</pre> but the whole thing in the middle is nonsense. taking a much closer look, though, this was before i'd learned... many things about the instruction set. first, on line 6 the first instruction is not `b98485`! it is just `b9` - `ret`. so this region is actually the end of one function and start of the next. `84 85 86` are pushes in the prologue of the real function of interest. -additionally, `bf` is not a standalone instruction, it takes two bytes as an immediate to `call`. and `ed` is not an instruction on its own, it is `r5 <- [imm16]`. so lets delineate that correctly... -``` -84 85 86 e600 ; push r4; push r5; push r6; r6 <- 0 -ceeab0 ; [0xb0ea] <- 0 -ceebb0 ; [0xb0eb] <- 0 -ceecb0 ; [0xb0ec] <- 0 -ceedb0 ; [0xb0ed] <- 0 -76 ; r0 -> r6 -ede6b0 bf2fed ; r5 <- [0xb0e6]; call 32x8b multiply? -ede7b0 bf2fed ; r5 <- [0xb0e7]; call 32x8b multiply? -ede8b0 bf2fed ; r5 <- [0xb0e8]; call 32x8b multiply? -ede9b0 bf2fed ; r5 <- [0xb0e9]; call 32x8b multiply? -e8eab0 ; [0xb0ea:0xbeed] <- r3:r2:r1:r0 +additionally, `bf` is not a standalone instruction, it takes two bytes as an immediate to `call`. and `ed` is not an instruction on its own, it is `r5 <- [imm16]`. so lets delineate that correctly... +<pre class="codebox"> +84 85 86 e600 <span class=blue>; push r4; push r5; push r6; r6 <- 0</span> +ceeab0 <span class=blue>; [0xb0ea] <- 0</span> +ceebb0 <span class=blue>; [0xb0eb] <- 0</span> +ceecb0 <span class=blue>; [0xb0ec] <- 0</span> +ceedb0 <span class=blue>; [0xb0ed] <- 0</span> +76 <span class=blue>; r0 -> r6</span> +ede6b0 bf2fed <span class=blue>; r5 <- [0xb0e6]; call 32x8b multiply?</span> +ede7b0 bf2fed <span class=blue>; r5 <- [0xb0e7]; call 32x8b multiply?</span> +ede8b0 bf2fed <span class=blue>; r5 <- [0xb0e8]; call 32x8b multiply?</span> +ede9b0 bf2fed <span class=blue>; r5 <- [0xb0e9]; call 32x8b multiply?</span> +e8eab0 <span class=blue>; [0xb0ea:0xbeed] <- r3:r2:r1:r0</span> e9ebb0 eaecb0 ebedb0 8e 8d 8c b9 -``` +</pre> -and so here we are: this function implements a 32b x 32 multiply of the integers in `b0ea:b0ed` and `b0e6:b0e9`, storing the result in `b0ea:b0ed`. notable mention to `r0`, which happens to be the low byte of the last round of multiplication, so the `e8eab0: [0xb0ea] <- r0` is in fact correctly storing the low byte of this whole thing to the output region. notable mention, too, to `76: r0 -> r6`, because by leaving `r0` free for clobber the inner multiply routine does not need to move the `r0` argument elsewhere to free `r0` for use in `add/adc`. and loads from memory are no more expensive (in terms of code size) when loading to an alternate register, so it's simple enough to load directly to `r6` for the to-multiply byte of reach step. +and so here we are: this function implements a 32b x 32 multiply of the integers in `b0ea:b0ed` and `b0e6:b0e9`, storing the result in `b0ea:b0ed`. notable mention to `r0`, which happens to be the low byte of the last round of multiplication, so the `e8eab0: [0xb0ea] <- r0` is in fact correctly storing the low byte of this whole thing to the output region. notable mention, too, to `76: r0 -> r6`, because by leaving `r0` free for clobber the inner multiply routine does not need to move the `r0` argument elsewhere to free `r0` for use in `add/adc`. and loads from memory are no more expensive (in terms of code size) when loading to an alternate register, so it's simple enough to load directly to `r6` for the to-multiply byte of reach step. -OK. this is great progress so far. many instructions make sense, composition of those instructions seems reasonable. the only remaining encoding regions that are unknown are: +## what's left? + +OK. this is great progress so far. many instructions make sense, composition of those instructions seems reasonable. the only remaining encoding regions that are unknown are: * `00..07` * `48..4f` * `58..5f` @@ -1024,20 +1044,20 @@ OK. this is great progress so far. many instructions make sense, composition of and as a bonus, knowing the relationship of the last two functions i'd looked at, i know the base address of this rom (finally!!): the inner multiply routine starts at `0xedf2`, so the first byte of this image is at address `0xed2f (mapped) - 0x31c3 (file) == 0xbb5c`. -theory for `d2`, `d4`, `d6`, as well as `e2`, `e4`, `e6`: like their `d<high>` counterparts but with no immediate offset. that is, `d4` is `[r5:r4] <- r0`? heres a hex region to help inform this theory: -``` - 900d ; jcc later - ea15ee eb16ee ; r4<-[0xee15]; r5<-[0xee16] - fa01 dc01 ; r0<-[r3:r2+1]; [r5:r4+1]<-r0 - f2 d4 ; ?? ?? - b9 ; ret +theory for `d2`, `d4`, `d6`, as well as `e2`, `e4`, `e6`: like their `d<high>` counterparts but with no immediate offset. that is, `d4` is `[r5:r4] <- r0`? heres a hex region to help inform this theory: +<pre class="codebox"> + 900d <span class=blue>; jcc later</span> + ea15ee eb16ee <span class=blue>; r4<-[0xee15]; r5<-[0xee16]</span> + fa01 dc01 <span class=blue>; r0<-[r3:r2+1]; [r5:r4+1]<-r0</span> + f2 d4 <span class=blue>; ?? ??</span> + b9 <span class=blue>; ret</span> later: - ea15ee eb16ee ; r4<-[0xee15]; r5<-[0xee16] - fa03 dc01 ; r0<-[r3:r2+3]; [r5:r4+1]<-r0 - fa02 d4 ; r0<-[r3:r2+2]; ?? - b9 ; ret -``` + ea15ee eb16ee <span class=blue>; r4<-[0xee15]; r5<-[0xee16]</span> + fa03 dc01 <span class=blue>; r0<-[r3:r2+3]; [r5:r4+1]<-r0</span> + fa02 d4 <span class=blue>; r0<-[r3:r2+2]; ??</span> + b9 <span class=blue>; ret</span> +</pre> so, this seems like a conditional branch to move 16b from one part of a struct or another, to a single destination location. `d4` probably stores the lower byte being copied, evidenced by `fa02` to load it in the later branch. then `f2` is probably a load of the lower byte, to store it in the earlier case. there is no `dc00` or `fa00` or similar.... probably because for offset-by-zero cases, there are these shorter instructions for the same outcome. this happens to make for a neat pattern as well for opcodes like `0b11x1_iNNN`: @@ -1047,52 +1067,64 @@ so, this seems like a conditional branch to move 16b from one part of a struct o and so this opens more questions than it answers! what happens if `NNN` an odd register? can this machine indirect through a register pair like `r4:r3`? why is the pair `r1:r0` never used? what about `r7:r6`? in fact `rEven:rOdd` seems never used, are those instructions entirely different? -[week long pause here] +... [week long pause here. Destiny 2: The Final Shape launched, and everything else ground to a halt] ... + +## whittling down the last few opcodes... -OK. short list of remaining instructions. still, want to figure out as many as possible. seems like `48..4f` has some kind of a lead here: -``` +OK. short list of remaining instructions. motivation and optimism are starting to fade.. but i want to figure out as many as possible. + +### `48..4f` + +seems like `48..4f` has some kind of a lead here: +<pre class="codebox"> e878b4 e979b4 ec70ef 59 4c 74 11 e971ef 49 71 14 c977b4 -``` +</pre> which at first only looks interesting for its use of `4c`, not used much at all in this program. structuring that slightly differently makes some of the relationships a little clearer: -``` -e878b4 e979b4 ; r0:r1 <- [0xb478:0xb479] -ec70ef 59 4c 74 11 ; r4 <- [0xef70]; ???; ???; r0 -> r4; r1 -> r0 -e971ef 49 71 14 ; r1 <- [0xef71]; ???; r0 -> r1; r4 -> r0 -c977b4 c876b4 ; [0xb477:0xb478] <- r0:r1 -``` +<pre class="codebox"> +e878b4 e979b4 <span class=blue>; r0:r1 <- [0xb478:0xb479]</span> +ec70ef 59 4c 74 11 <span class=blue>; r4 <- [0xef70]; ???; ???; r0 -> r4; r1 -> r0</span> +e971ef 49 71 14 <span class=blue>; r1 <- [0xef71]; ???; r0 -> r1; r4 -> r0</span> +c977b4 c876b4 <span class=blue>; [0xb477:0xb478] <- r0:r1</span> +</pre> the `4c` and `49` operations clearly modify r0. `59` might modify a register or so something else; if it modifies a register, it's probably `r1` which *is* used later. it seems like r1 is the high byte of a 16b integer, so an operation directly on that byte seems a little unlikely. `59` might be a mirror of `69` (clear carry flag), setting the carry flag instead? as for `49` and `4c`, best guesses are heavily informed by what i already know: this isn't `adc`, `or`, `and`, `add`, rotate left or right, ... but given the seeming 16b value being operated on, maybe these are `sbc`. that would mean with `59` being `set cf`, this is computing something like `*0xb479 -= *0xef70 + 1`. this isn't a lot to go on for `sbc`, but double-checking a different function, it's at least coherent: -``` +<pre class="codebox"> e8e8ed 9841 e103 fe01 79 9807 e102 fe01 79 9022 ea03ee eb04ee e058 e11b - 59 4a 72 ; ??? ; sbc r0, r2; r0 -> r2 - 11 4b 73 ; r1 -> r0 ; sbc r0, r3; r0 -> r3 - e8deee 7a e8dfee 4b 9108 ; r0 <- [0xeede]; r0 -= r2; r0 <- [0xeedf]; sbc r0, r3; jc $+8 + 59 4a 72 <span class=blue>; ??? ; sbc r0, r2; r0 -> r2</span> + 11 4b 73 <span class=blue>; r1 -> r0 ; sbc r0, r3; r0 -> r3</span> + e8deee 7a e8dfee 4b 9108 <span class=blue>; r0 <- [0xeede]; r0 -= r2; r0 <- [0xeedf]; sbc r0, r3; jc $+8</span> bf27c5 e400 bff4dd e102 fe01 79 9803 bc05c7 28 c8e8ed bc05c7 e101 fe01 79 9008 -``` +</pre> i've marked up the most relevant lines: `59` is a leader again, and `r1` is used here, but if `59` modifies `r1` then, again, it's something that makes sense to do first and only to the upper byte of a 16bit number. `r2:r3` seem subtracted into, and with the `load; sub; load; sbc; jc` sequence this implements something like `if (r2:r3 - 0x1b58 >= [0xeede:0xeedf])` +### `59` ... or a wild guess towards `58..5f`? + going to also assume that `59` is `set carry flag`, since no other `58..5f` instructions seem to be present here.. this mirrors `69` as well. +### `60..67` ... where possible + `61` shows up before conditional branches, usually after loading from `0xf303`..? is that maybe a gpio address? `60` and `62` are also present .... here: -``` +<pre class="codebox"> fe07 72 fe08 73 fa04 c875ed fa03 c874ed e850f1 62 9003 bceacc e852f1 60 9003 bceacc e400 bf67c5 bceacc -``` +</pre> ... is `60..67` something like "extract bit N of r0"? r0 is typically loaded before it's executed, and conditional branches are always present after. probably not consuming an `rN` and probably modifies r0 for the condition. difficult to imagine another purpose for a 3-bit field at that point. -`ba` is probably `iret`? in this: -``` +### `ba` + +another region i looked at very early on has a "ba" in it at least. it's a remarkably rare opcode, it seems: +<pre class="codebox"> 8f 8e 88 c8f0b0 88 c8efb0 88 c8eeb0 88 c8edb0 88 c8ecb0 88 c8ebb0 88 c8eab0 88 c8e9b0 88 @@ -1100,59 +1132,63 @@ c8e8b0 88 c8e7b0 88 c8e6b0 8d 8c 8b 8a 89 88 bae8f3 b4 c85ced e8f2b4 c85bed b9 -``` -... is probably actually split up wrong, rather than `bae8f3 b4`, this is `ba e8f3b4`! matching with the `e8f2b4` to load one byte lower a few instructions later. fixed up that looks like this: -``` +</pre> +... is actually split up wrong, rather than `bae8f3 b4`, this is `ba e8f3b4`! matching with the `e8f2b4` to load one byte lower a few instructions later. fixed up that looks like this: +<pre class="codebox"> [elided restore of 0xb0e6:0xb0f0] 8d 8c 8b 8a 89 88 ba e8f3b4 c85ced e8f2b4 c85bed b9 -``` +</pre> + +so then this routine is restoring the region of bytes used for 32b x 32b multiply, all registers, then almost-but-not-ret. given the full-restore including scratch memory, this seems like the end of an interrupt routine. so `ba` is `iret`? consistent with what might be an ISR return at least. there happens to be another small routine directly after. -so then this routine is restoring the region of bytes used for 32b x 32b multiply, all registers, then `iret`. consistent with what might be an ISR return. there happens to be another small routine directly after. +### `00..07` turning all the way back, this pattern gives an idea for `00..07`: -``` -e850ef e951ef ; r1:r0 <- [0xef51]:[0xef50] -e404 ; r4 <- 0x04 -54 ; r0 += r4 -9101 ; jnc $+1 - 01 ; ??? -80 ; push r0 -f0 ; r0 <- [r1:r0] -74 ; r4 <- r0 -88 ; pop r0 -f801 ; r0 <- [r1:r0 + 1] -75 ; r5 <- r0 -``` +<pre class="codebox"> +e850ef e951ef <span class=blue>; r1:r0 <- [0xef51]:[0xef50]</span> +e404 <span class=blue>; r4 <- 0x04</span> +54 <span class=blue>; r0 += r4</span> +9101 <span class=blue>; jnc $+1</span> + 01 <span class=blue>; ???</span> +80 <span class=blue>; push r0</span> +f0 <span class=blue>; r0 <- [r1:r0]</span> +74 <span class=blue>; r4 <- r0</span> +88 <span class=blue>; pop r0</span> +f801 <span class=blue>; r0 <- [r1:r0 + 1]</span> +75 <span class=blue>; r5 <- r0</span> +</pre> or this, -``` -15 71 14 ; r1:r0 <- r5:r4 -e304 ; r3 <- 0x04 -53 ; r0 += r3 -9101 ; jnc $+1 - 01 ; ??? -76 11 77 ; r7:r6 <- r1:r0 -``` +<pre class="codebox"> +15 71 14 <span class=blue>; r1:r0 <- r5:r4</span> +e304 <span class=blue>; r3 <- 0x04</span> +53 <span class=blue>; r0 += r3</span> +9101 <span class=blue>; jnc $+1</span> + 01 <span class=blue>; ???</span> +76 11 77 <span class=blue>; r7:r6 <- r1:r0</span> +</pre> so here, `01` is only conditionally executed if adding produced a carry out. `r0` and `r1` seem to be operated on together, so the two might be logically a 16-bit integer. so `01` might be `inc rN`? in that case the carry out is being conditionally added into the higher byte. nothing else has seemed obviously like an `inc` yet. this seems a little odd on the whole in the first snippet, since the result of addition doesn't seem to be preserved.. `r0` is clobbered in the last load. could that whole region have been `f805 74 f806 75`? might be missing some additional behavior. other uses of `00..07` don't obviously disagree with this though. for example, `00`: -``` -e8eeed 00 c8eeed ; [0xedee] += 1 +<pre class="codebox"> +e8eeed 00 c8eeed <span class=blue>; [0xedee] += 1</span> ... -fa03 00 da03 ; [r3:r2 + 3] += 1 +fa03 00 da03 <span class=blue>; [r3:r2 + 3] += 1</span> ... -fe04 00 de04 ; [r7:r6 + 4] += 1 +fe04 00 de04 <span class=blue>; [r7:r6 + 4] += 1</span> ... -e8c0ee 00 c8c0ee ; [0xeec0] += 1 -``` +e8c0ee 00 c8c0ee <span class=blue>; [0xeec0] += 1</span> +</pre> so, maybe `00` actually is inc. -this all is some progress, not much unknown left. from the earlier list: +## mostly done, what's left in the encoding space? + +this all is some progress, not much unknown left. from the earlier list: * `00..07` - `inc rN` * `48..4f` @@ -1168,81 +1204,81 @@ this all is some progress, not much unknown left. from the earlier list: * `b8..bf`, except `b9`, `ba`, `bc` (maybe jump?), `bf` * `c0..c7`, which is remarkably rare. `c0`, `c4`, `c6`? * `d0..df`, ~except `da`, `de`. seen but not understood: `db`, `dc`~ - `d0..d7`, evens, are `[rN+1:rN] <- r0` - `d8..df`, evens, are `[rN+1:rN + imm] <- r0` + `d0..d7`, evens, are `[rN+1:rN] <- r0` + `d8..df`, evens, are `[rN+1:rN + imm] <- r0` `db` is not actually present, was a misreading of the program * `f0..ff`, ~except `fa`, `fe`. seen but not understood: `f0`, `f2`, `f3`, `f4`, `f6`~ - `f0..f7`, evens, are `r0 <- [rN+1:rN]` - `f8..ff`, evens, are `r0 <- [rN+1:rN + imm]` + `f0..f7`, evens, are `r0 <- [rN+1:rN]` + `f8..ff`, evens, are `r0 <- [rN+1:rN + imm]` `f3` is not actually present, was a misreading of the program -so.. last questions: +so.. last questions: * is `78..7f` actually `sub` or `cmp`? * what is `a0`? * what are `c0..c7`? -### `78..7f` ... `sub` or `cmp`? +## `78..7f` ... `sub` or `cmp`? the question really is, "does this instruction modify `r0`?" - it's possible that the instruction computes `sub`, stores the result, and the program never actually uses that result, either because substraction isn't often used or because of a compiler deficiency, something else, whatever. so the best guess here is, "is `r0` ever preserved after a `78..7f`?" or asked differently, "does `r0` get preserved/restored around a `78..7f`?" the only hint that `78..7f` might clobber `r0` comes from regions like this: -``` -e103 fe01 79 9807 ; r1 <- 3; r0 <- [r7:r6]; sub r0, r1; jz ... - e102 fe01 79 9022 ; r1 <- 2; r0 <- [r7:r6]; sub r0, r1; jnz ... +<pre class="codebox"> +e103 fe01 79 9807 <span class=blue>; r1 <- 3; r0 <- [r7:r6]; sub r0, r1; jz ...</span> + e102 fe01 79 9022 <span class=blue>; r1 <- 2; r0 <- [r7:r6]; sub r0, r1; jnz ...</span> ea03ee eb04ee e058 e11b ... -``` +</pre> if `79` were `cmp` and did not modify `r0`, there wouldn't be a need to reload it in `fe01`. ... but this may be poor code, and the reload may actually be redundant. since this seems to implement `if ([r7:r6] == 3 || [r7:r6] == 2) { .. load registers }`, and there are no other signs that `78..7f` clobbers `r0`, this might actually be `cmp`. -### what is `a0`? +## what is `a0`? this seems to be the only place `a0` is present: -``` +<pre class="codebox"> 14 71 bcabe6 -bfd00e ; call 0xed0 (???) -c8bcee ; [0xeebc] <- r0 -a0 ; ??? -72 11 73 ; r3:r2 <- r1:r0 -fa0b c8bfee ; [0xeebf] <- [r3:r2 + 0x0b] -fa0a c8beee ; [0xeebe] <- [r3:r2 + 0x0a] -e046 40 ; r0 <- 0x46; dec r0 (???) -da0a ; [r3:r2 + 0x0a] <- r0 -e0e6 9901 ; r0 <- 0xe6; jc $+01 - 40 ; dec r0 (???) -da0b ; [r3:r2 + 0x0b] <- r0 +bfd00e <span class=blue>; call 0xed0 (???)</span> +c8bcee <span class=blue>; [0xeebc] <- r0</span> +a0 <span class=blue>; ???</span> +72 11 73 <span class=blue>; r3:r2 <- r1:r0</span> +fa0b c8bfee <span class=blue>; [0xeebf] <- [r3:r2 + 0x0b]</span> +fa0a c8beee <span class=blue>; [0xeebe] <- [r3:r2 + 0x0a]</span> +e046 40 <span class=blue>; r0 <- 0x46; dec r0 (???)</span> +da0a <span class=blue>; [r3:r2 + 0x0a] <- r0</span> +e0e6 9901 <span class=blue>; r0 <- 0xe6; jc $+01</span> + 40 <span class=blue>; dec r0 (???)</span> +da0b <span class=blue>; [r3:r2 + 0x0b] <- r0</span> b9 -``` +</pre> whatever it is, it presumably operates on at least `r0`, writes to `r0` and `r1`. the routine at `0xed0` (outside the image?) may say more about what the registers are at its return, but from this alone it's hard to guess. it is interesting and remarkable that only `r0` is saved to `[0xeebc]`, not `r1`! -### what are `c0..c7`? +## what are `c0..c7`? seems like the most informative region to hint at these instructions: -``` +<pre class="codebox"> e81ff8 61 903c - ea29ef eb2aef ; r5:r4 <- [0xef2a]:[0xef29] - fa08 71 fa07 ; r1:r0 <- [r5:r4 + 8]:[r5:r4 + 7] - c0 ; ?? - 74 11 75 ; r5:r4 <- r1:r0 - 12 ; r0 <- r2 - e92aef ; r1 <- [0xef2a] - e307 53 9101 ; r3 <- 0x07; add r0, r3; jnc $+1 - 01 ; inc r1 - 80 f0 72 88 ; r2 <- [r1:r0] - f801 73 ; r3 <- [r1:r0 + 1] - f2 ; r0 <- [r3:r2] - e1ff 51 ; r0 += 0xff - 77 ; r7 <- r0 -e600 ; r6 <- 0 -9806 ; - f4 c88cf8 ; [0xf88c] <- [r5:r4] - c4 ; ?? - 06 ; inc r6 - - 16 7f ; r0 <- r6; cmp r0, r7 -91f6 ; jb $-0x0a -``` + ea29ef eb2aef <span class=blue>; r5:r4 <- [0xef2a]:[0xef29]</span> + fa08 71 fa07 <span class=blue>; r1:r0 <- [r5:r4 + 8]:[r5:r4 + 7]</span> + c0 <span class=blue>; ??</span> + 74 11 75 <span class=blue>; r5:r4 <- r1:r0</span> + 12 <span class=blue>; r0 <- r2</span> + e92aef <span class=blue>; r1 <- [0xef2a]</span> + e307 53 9101 <span class=blue>; r3 <- 0x07; add r0, r3; jnc $+1</span> + 01 <span class=blue>; inc r1</span> + 80 f0 72 88 <span class=blue>; r2 <- [r1:r0]</span> + f801 73 <span class=blue>; r3 <- [r1:r0 + 1]</span> + f2 <span class=blue>; r0 <- [r3:r2]</span> + e1ff 51 <span class=blue>; r0 += 0xff</span> + 77 <span class=blue>; r7 <- r0</span> +e600 <span class=blue>; r6 <- 0</span> +9806 <span class=blue>;</span> + f4 c88cf8 <span class=blue>; [0xf88c] <- [r5:r4]</span> + c4 <span class=blue>; ??</span> + 06 <span class=blue>; inc r6</span> + + 16 7f <span class=blue>; r0 <- r6; cmp r0, r7</span> +91f6 <span class=blue>; jb $-0x0a</span> +</pre> the ending loop makes some sense: load from a 16-bit pointer, store to maybe-IO-register(?), increment `r6`, repeat until `r6 == r7`. in other contexts where `c0` is used, `r1:r0` is recently populated with a 16-bit integer too. so it seems likely that `c[0-7]` operates on at least `rN`, maybe `rN+1` if it's more like the `d_` or `f_` two-registers-as-an-address instructions. @@ -1251,78 +1287,78 @@ if `c4` were a load or store it would probably operate with respect to `r0` and looking at the `c0` earlier in this block `r1:r0` is loaded immediately before, and then read (copied to `r5:r4`) immediately after. `r5:r4` is used for the `f4` load, so those registers form something like a pointer. compare with the other use of `c4` in this program here: -``` - e4e3 e5ed ; r4 <- 0xe3; r5 <- 0xed - e28f e301 ; r2 <- 0x8f; r3 <- 0x01 - 28 ; xor r0, r0 +</pre> + e4e3 e5ed <span class=blue>; r4 <- 0xe3; r5 <- 0xed</span> + e28f e301 <span class=blue>; r2 <- 0x8f; r3 <- 0x01</span> + 28 <span class=blue>; xor r0, r0</span> loop: - 42 9903 ; dec r2; jnc body - 43 9105 ; dec r3; jc exit + 42 9903 <span class=blue>; dec r2; jnc body</span> + 43 9105 <span class=blue>; dec r3; jc exit</span> body: - d4 ; [r5:r4] <- r0 - c4 ; ??? - bc69bb ; jmp loop + d4 <span class=blue>; [r5:r4] <- r0</span> + c4 <span class=blue>; ???</span> + bc69bb <span class=blue>; jmp loop</span> exit: - bc26be ; jmp ... somewhere ... -``` + bc26be <span class=blue>; jmp ... somewhere ...</span> +</pre> -`r5:r4` is written through, but the combined `dec r2; jnc body; dec r3; jc exit; ... jmp loop` forms a a loop that repeats until `r3:r2` is decremented past zero. the loop body is simply `[r5:r4] <- r0`, `r0` set to zero, `c4` probably operates on `r5:r4`, and if it modifies `r0` then `r0` is left in that modified state for the next store through `[r5:r4]`. +`r5:r4` is written through, but the combined `dec r2; jnc body; dec r3; jc exit; ... jmp loop` forms a a loop that repeats until `r3:r2` is decremented past zero. the loop body is simply `[r5:r4] <- r0`, `r0` set to zero, `c4` probably operates on `r5:r4`, and if it modifies `r0` then `r0` is left in that modified state for the next store through `[r5:r4]`. looking at other 8-bit processors for inspiration regarding `c[0246]`, it seems plausible that it is in fact an increment for a register pair. in that case, the loop forms a memset, clearing `0x1c0` bytes of memory. this is also almost at the start of the image - not knowing where execution begins, it still seems likely enough that this is related to initialization. there might not be a corresponding 16-bit decrement instruction? or if there is, like the 8080, it might not set flags, and so would not be useful to decrement `r3:r2` in this loop. looking back at the other loop earlier: -``` -e600 ; r6 <- 0 -9806 ; - f4 c88cf8 ; [0xf88c] <- [r5:r4] - c4 ; inc r5:r4 - 06 ; inc r6 - - 16 7f ; r0 <- r6; cmp r0, r7 -91f6 ; jc $-0x0a -``` +<pre class="codebox"> +e600 <span class=blue>; r6 <- 0</span> +9806 <span class=blue>;</span> + f4 c88cf8 <span class=blue>; [0xf88c] <- [r5:r4]</span> + c4 <span class=blue>; inc r5:r4</span> + 06 <span class=blue>; inc r6</span> + + 16 7f <span class=blue>; r0 <- r6; cmp r0, r7</span> +91f6 <span class=blue>; jc $-0x0a</span> +</pre> then taking `c4` to be `inc r5:r4` makes this a loop writing the bytes from a buffer `r7` bytes long at `r5:r4` into the address `f88c`. why not decrement `r7` instead of the inc/mov/compare?? -### but wait! what happened with `jcc`? +## but wait! what happened with `jcc`? in writing this up i flip-flopped on the meaning of `91` and `99` jumps without entirely realizing it. two different regions of code suggest different semantics! first, the inner multiply loop from earlier: -``` - e408 ; r4 <- 8 +<pre class="codebox"> + e408 <span class=blue>; r4 <- 8</span> back: - 69 3d ; ccf; rcr r5 - 911d ; jcc.lo.1 forward + 69 3d <span class=blue>; ccf; rcr r5</span> + 911d <span class=blue>; jcc.lo.1 forward</span> back: - e8eab0 56 c8eab0 ; add [0xb0ea], r6 - e8ebb0 09 c8ebb0 ; add [0xb0eb], r1 - e8ecb0 0a c8ecb0 ; add [0xb0eb], r2 - e8edb0 0b c8edb0 ; add [0xb0eb], r3 + e8eab0 56 c8eab0 <span class=blue>; add [0xb0ea], r6</span> + e8ebb0 09 c8ebb0 <span class=blue>; add [0xb0eb], r1</span> + e8ecb0 0a c8ecb0 <span class=blue>; add [0xb0eb], r2</span> + e8edb0 0b c8edb0 <span class=blue>; add [0xb0eb], r3</span> - 69 ; ccf + 69 <span class=blue>; ccf</span> forward: - 36 31 32 33 44 ; ccf; rcl r6:r1:r2:r3; dec r4 - 90d8 ; jnz back - b9 ; ret -``` + 36 31 32 33 44 <span class=blue>; ccf; rcl r6:r1:r2:r3; dec r4</span> + 90d8 <span class=blue>; jnz back</span> + b9 <span class=blue>; ret</span> +</pre> where `91` seems like `jnc` - "jump past adding in the multiplier if the next bit in the multiplicand was 0". but a different loop suggests the opposite reading: -``` - e4e3 e5ed ; r4 <- 0xe3; r5 <- 0xed - e28f e301 ; r2 <- 0x8f; r3 <- 0x01 - 28 ; xor r0, r0 +<pre class="codebox"> + e4e3 e5ed <span class=blue>; r4 <- 0xe3; r5 <- 0xed</span> + e28f e301 <span class=blue>; r2 <- 0x8f; r3 <- 0x01</span> + 28 <span class=blue>; xor r0, r0</span> loop: - 42 9903 ; dec r2; jnc body - 43 9105 ; dec r3; jc exit + 42 9903 <span class=blue>; dec r2; jnc body</span> + 43 9105 <span class=blue>; dec r3; jc exit</span> body: - d4 ; [r5:r4] <- r0 - c4 ; ??? - bc69bb ; jmp loop + d4 <span class=blue>; [r5:r4] <- r0</span> + c4 <span class=blue>; ???</span> + bc69bb <span class=blue>; jmp loop</span> exit: - bc26be ; jmp ... somewhere ... -``` + bc26be <span class=blue>; jmp ... somewhere ...</span> +</pre> where instead it's `99` that looks like a `jnc` - "if decrementing r2 did not borrow, do not decrement r3 and continue another loop iteration". and `91` is what looks like a `jc`- "if decrementing r3 borrowed, skip past the loop body". either "jc" and "jnc" are conditional on more than it first seems, or perhaps more likely, `dec` produces a carry bit any time the result is not zero. as an example: @@ -1336,6 +1372,27 @@ either "jc" and "jnc" are conditional on more than it first seems, or perhaps mo that would bring this all back together: `99` is `jc`, `91` is `jnc`. it's rare that there's a `dec; jcc` (one other instance in this program at `0x16db`), so it's hard to cross-check this interpretation. +## last thoughts + +in looking at this i was very surprised by how informative loops - especially +short loops - are for finding bounds of what a program may or likely does not +do. this isn't very surprising in retrospect; short programs don't have +opportunities to do very much, and doing the same not-very-much in a loop has +even fewer opportunities to do something useful. _and_ loops are usually +conditioned on a relatively simple predicate: `while x < 10 do { ... }`, or +`do { ... } while x > 10`, or `while x != 0 { x = loop_body() }`. a _lot_ of +behavior fell out of finding short loops and making sense of the instructions +used to drive them. + +this definitely applies when you *do* know the instruction set but are trying +to make sense of a larger program - it's just good advice when reverse +engineering a program. it's neat to see the idea carry through when you're +figuring out the instruction set itself. + +additionally: this is doable! what's totally unknown at this point is mostly +instructions that don't appear in this program (at which point it's hard to +guess about behavior...) + ## conclusion that seems to be the ISA, at least as used in this program. this architecture seems like an outsider art re-envisioning of the 8080, with fewer register to register movs, and more indexed memory accesses. it seems interesting that this architecture has loads like `[r7:r6]` and `[r7:r6 + N]` but not `[r7:r6 + rN]`. having non-offset load/store through a register pair seems a bit out of place in its own right: it's a lot of encoding space to reserve for a relatively rare operation. maybe it's more common in some reference program, and this firmware is the odd one? @@ -1343,10 +1400,10 @@ that seems to be the ISA, at least as used in this program. this architecture se `a0..af` are almost nonexistent here, and might be other 8080-style instructions. `b0..b8` are not represented in this program, and would be prime encoding space for conditional returns. it wouldn't be terribly shocking if a compiler didn't know to use conditional returns and instead conditionally branched over returns. the moment _i_, at least, have been waiting for, after describing as much of the ISA as possible, is to compare notes with others who have looked at this CPU or programs for it: -* whitequark's binja plugin: https://github.com/whitequark/binja-avnera -* several years ago: https://github.com/Prehistoricman/AV7300 +* whitequark's binja plugin: [https://github.com/whitequark/binja-avnera](https://github.com/whitequark/binja-avnera) +* several years ago: [https://github.com/Prehistoricman/AV7300](https://github.com/Prehistoricman/AV7300) -... we almost entirely agree! it seems that Prehistoricman tested with a physical CPU, and has some notes for opcodes that are otherwise not present: https://github.com/Prehistoricman/AV7300/blob/master/Instruction%20set%20notes.txt#L195-L198 +... we almost entirely agree! it seems that Prehistoricman tested with a physical CPU, and has some notes for opcodes that are otherwise not present: [https://github.com/Prehistoricman/AV7300/blob/master/Instruction%20set%20notes.txt#L195-L198](https://github.com/Prehistoricman/AV7300/blob/master/Instruction%20set%20notes.txt#L195-L198) whitequark records `58..5f` and `68..6f` as `set` and `clr` respectively, which i suspect are the same as i'd understood: set (or clear) bit in status register. this is also what Prehistoricman understood them to mean. @@ -1356,18 +1413,19 @@ if you happen to want to disassemble programs for Avnera processors - it's not a ### summarized materials -there are a few more programs reportedly for this architecture here, from Prehistoricman: -[link 1, sha256] -[link 2, sha256] +there are a few more programs reportedly for this architecture here, from Prehistoricman: +[link 1, sha256] +[link 2, sha256] -the program i reference heavily in this post is here: -[link 3, sha256] +the program i reference heavily in this post is here: +[link 3, sha256] +* [noes](./noes) [mirror] -whitequark's excellent cheatsheet of the encoding space: +whitequark's excellent cheatsheet of the encoding space: * https://github.com/whitequark/binja-avnera/tree/main?tab=readme-ov-file#cheatsheet this last one i find interesting as history for what i guessed right, wrong, and revisited how early on - my notes as i touched up and revisited `noes` with -increasingly-better understanding: -* [yax/avnera/disasm/](./disasm) +increasingly-better understanding: +* [yax/avnera/disasm/](./disasm/) |